Connectivity and cloud computing are key elements in the future of electric mobility. They allow manufacturers to provide advanced fleet management and predictive diagnostic services. In particular, cloud computing dramatically enhances data availability and enables the use of more complex and accurate state estimation algorithms for electric vehicle lithium-ion batteries. A tuning procedure for a moving window least squares algorithm to estimate the parameters of a 2-RC equivalent circuit battery model is presented in this paper. The tuning procedure uses real data collected from a test vehicle and uploaded to the Stellantis-CRF cloud. The tuned algorithm was applied to eight months of road tests and showed very small estimation errors. The errors are comparable to other literature data, even when the literature results were obtained in laboratory tests. The estimated model parameters are tracked through time and seem accurate enough to show the first signs of battery aging.
Battery Management Systems are essential for safe and effective use of Lithium-Ion batteries. The increasing complexity of the control and estimation algorithms requires deeper functional testing and validation phases of BMSs. However, the use of real batteries in such phases leads to hazards and safety risks. Battery emulators and the Hardware-in-the-Loop approach can instead speed-up and increase the safety of the functional testing and algorithm validation phases. This work describes the design and the characterization of a low-cost modular multi-cell battery emulator which provides a complete emulation of cell voltage, temperature, and current. This platform can be used to carry out Hardware-in-the-Loop tests on custom and commercial Battery Management Systems. The paper describes the platform design constraints derived from the most diffused Battery Management System architectures, the main design and implementation choices, and the platform characterization results. The proposed emulation platform is compared with literature and commercial ones showing a very good trade-off between performance and cost. This characteristic makes it appealing for small-size laboratories that develop and test Battery Management Systems. The project has therefore been made available to the scientific community as a freely downloadable open hardware platform.
Lithium-ion Batteries are widely used in several applications but require complex management systems to ensure their safe and effective usage. Algorithm development and functional testing are among the most complex and time-consuming phases of lithium-ion battery management system design. Furthermore, the use of real batteries in those phases introduces safety hazards. The hardware-in-the-loop approach allows the designers to overcome these limitations by replacing real batteries with hardware emulators. This article presents a low-cost battery emulator platform to reproduce the main electrical and thermal behaviors of elementary battery cells. The platform allows the user to manually control the emulator outputs or automatically reproduce specific voltage, temperature, and current profiles. In addition, the platform can independently reproduce the battery cell behaviors by using a customizable 2-RC equivalent electrical model. The functional testing and the balancing algorithm assessment of a custom battery management system are used as a case study to evaluate the developed battery emulator platform. Results demonstrate the effective advantages of the developed platform to assess the battery management system safety functionalities and algorithms. Finally, the platform is made freely available to accelerate research and innovation in the field of energy storage technology.
Sodium-Metal Halide batteries are a promising and cheap alternative to lithium-ion ones for stationary applications such as smart grids. However, the reliability of their elemental cell is low, and a battery composed of hundreds of cells could likely have several broken cells after a few working years. Luckily, the cell failure mechanisms are not destructive and convert the broken cell in an almost ideal short-circuit. A simulation platform to quantify the effects of the broken cells on the battery performance was developed in this work, and used to estimate the reliability of four different Sodium-Nickel Halide (Na – NiCl 2 ) commercial batteries manufactured by FZSoNick. A theoretical approach is first provided to support the results obtained from the simulations. The study highlights the necessity to improve the power control system of the battery to maximize its usable energy and mitigate the performance degradation caused by the broken cells.