Synthetic Aperture Radar (SAR) ship detection is an important maritime application. However, azimuth ambiguities caused by the finite sampling of the Doppler spectrum are often visible in SAR images and are always mistaken as ships by classic detection techniques, like the Constant False Alarm Rate (CFAR). It is known that radar targets and azimuth ambiguities have different characteristics in polarimetric SAR (PolSAR) data, i.e., first ambiguities usually have strong odd- or double-bounce scattering and the maximum amplitude of the first ambiguity in S_HV is always considerably smaller than that of the corresponding target for zero or high velocity. On the basis of this characteristics, this paper finds that first ambiguities usually have low volume scattering power relative to ships and almost have no helix scattering by Yamaguchi decomposition. But some residual ambiguities still exit in the volume scattering power and have similar scattering intensity to small ships, and some parts of a ship also have zero helix scattering owing to some physical factors (e.g., ship structure, radar incidence angle, etc.). Thus, for high-precision ship detection, a new ship detection method based on cross-correlation between the volume and helix scattering mechanisms derived from Yamaguchi decomposition is proposed to avoid false alarms caused by azimuth ambiguities and enhance Target-to-Clutter Ratio (TCR) for improving the miss detection rate of small ships. By experiments, it is proved that our method can work effectively and has high detection accuracy.

There are more unknowns than equations to solve for previous four-component decomposition methods. In this case, the nonnegative power of each scattering mechanism has to be determined with some assumptions and physical power constraints. This paper presents a new decomposition scheme, which models the measured matrix after polarimetric orientation angle (POA) compensation as a linear sum of five scattering mechanisms (i.e., odd-bounce scattering, double-bounce scattering, diffuse scattering, volume scattering, and helix scattering). And the volume scattering power is calculated by a slight modified NNED method, owing to this method considering the external volume scattering model from oblique dihedral structure. After the helix and volume scattering powers have been determined sequentially, the other three scattering powers are estimated by combining the generalized similarity parameter (GSP) and the eigenvalue decomposition. Among them, due to POA compensation, the diffuse scattering induced from a dihedral with a relative orientation of 45º has negligible scattering power. Thus, the new method can be reduced as four-component decomposition automatically. And then the ALOS-2 PolSAR data covering Guiyang City, Guizhou Province, China were used to evaluate the performance of the new method in comparison with some classical decomposition methods (i.e. Y4R, S4R and G4U).

Keywords: GaoFen-3, Change Detection, Land Use, Polarimetric SAR, High-resolution, Quality Evaluation GaoFen-3 (GF-3) satellite, is the first C band and multi-polarimetric Synthetic Aperture Radar (SAR) satellite in China. In order to explore the feasibility of GF-3 satellite in remote sensing interpretation and land-use remote sensing change detection, taking Guangzhou, China as a study area, the full polarimetric image of GF-3 satellite with 8 m resolution of two temporal as the data source. Firstly, the image is pre-processed by orthorectification, image registration and mosaic, and the land-use remote sensing digital orthophoto map (DOM) in 2017 is made according to the each county. Then the classification analysis and judgment of ground objects on the image are carried out by means of ArcGIS combining with the auxiliary data and using artificial visual interpretation, to determine the area of changes and the category of change objects. According to the unified change information extraction principle to extract change areas. Finally, the change detection results are compared with 3 m resolution TerraSAR-X data and 2 m resolution multi-spectral image, and the accuracy is evaluated. Experimental results show that the accuracy of the GF-3 data is over 75 % in detecting the change of ground objects, and the detection capability of new filling soil is better than that of TerraSAR-X data, verify the detection and monitoring capability of GF-3 data to the change information extraction, also, it shows that GF-3 can provide effective data support for the remote sensing detection of land resources.

Array Interferometric Synthetic Aperture Radar (ArrayInSAR) point cloud is a point cloud obtained by three-dimensional imaging of two-dimensional Synthetic Aperture Radar (SAR) images using array interferometric synthetic aperture radar technology, which can eliminate the phenomenon of layover in two-dimensional images and provide new data support for intelligent mapping. However, due to the influence of system thermal noise, baseline error and environment interference, there are noise points in the ArrayInSAR point cloud with uneven distribution and large elevation error, which bring a lot of gross errors to the 3D terrain results. To solve the problem that discrete points in ArrayInSAR point cloud data seriously affect the quality of three-dimensional data, this paper proposes an ArrayInSAR point cloud outlier noise removal method based on hybrid filtering. According to the distribution pattern of noise points, the outlier noise is divided into discrete outlier noise points and clusters of outlier noise. Firstly, the adaptive segmentation of point cloud dispersion coefficient within the k-neighborhood is used to remove discrete outlier noise points, and then the adaptive threshold segmentation algorithm based on the number of in-class points after K-means clustering is used to remove the cluster outlier noise of ArrayInSAR point cloud data. In order to verify the effectiveness, the proposed method is compared with other classical outlier noise removal methods. The experimental results show that the method proposed in this paper can effectively remove outlier noise in ArrayInSAR point cloud data and improve the quality of ArrayInSAR point clouds.