Ice-templating technology holds great potential to construct industrial porous materials from nanometers to the macroscopic scale for tailoring thermal, electronic, or acoustic transport. Herein, we describe a general ice-templating technology through freezing the material on a rotating cryogenic drum surface, crushing it, and then re-casting the nanofiber slurry. Through decoupling the ice nucleation and growth processes, we achieved the columnar-equiaxed crystal transition in the freezing procedure. The highly random stacking and integrating of equiaxed ice crystals can organize nanofibers into thousands of repeating microscale units with a tortuous channel topology. Owing to the spatially well-defined isotropic structure, the obtained Al2O3·SiO2 nanofiber aerogels exhibit ultralow thermal conductivity, superelasticity, good damage tolerance, and fatigue resistance. These features, together with their natural stability up to 1200 °C, make them highly robust for thermal insulation under extreme thermomechanical environments. Cascading thermal runaway propagation in a high-capacity lithium-ion battery module consisting of LiNi0.8Co0.1Mn0.1O2 cathode, with ultrahigh thermal shock power of 215 kW, can be completely prevented by a thin nanofiber aerogel layer. These findings not only establish a general production route for nanomaterial assemblies that is conventionally challenging, but also demonstrate a high-energy-density battery module configuration with a high safety standard that is critical for practical applications.
Capillary-fed thin-film evaporation via micro/nanoscale structures has attracted increasing attention for its high evaporation flux and pumpless liquid replenishment. However, maximizing thin-film evaporation has been hindered by the intrinsic trade-off between the heat flux and liquid transport. Here, we designed and fabricated nanostructured micro-steam volcanoes on copper surfaces featuring triple-level super-wicking routes to overcome this trade-off and boost water evaporation. The triple-level super-wicking routes enable the continuous formation of a 3D thin film for highly efficient evaporation by continuous self-driven liquid replenishment and extending the thin-film region. The micro-steam volcanoes increased the surface area by 225%, improving the evaporation rate by 141%, with a rapid self-pumping water transport speed up to 80 mm s−1. A remarkable solar-driven water evaporation rate of 3.33 kg m−2 h−1 under one sun vertical incidence was achieved, which is among the highest reported values for metal-based evaporators. When attached to electric-heating plates, the evaporator realized an electrothermal evaporation rate of 12.13 kg m−2 h−1. Moreover, it can also be used for evaporative cooling with enhanced convective heat transfer, reaching a 36.2 °C temperature reduction on a heat source with a heat flux of 6 W cm−2. This study promises a general strategy for designing thin-film evaporators with high efficiencies, low costs, and multi-functional compatibilities.