The formation of a monocrystalline silicon needle by picosecond optical vortex pulse illumination was demonstrated for the first time in this study. The dynamics of this silicon needle formation was further revealed by employing an ultrahigh-speed camera. The melted silicon was collected through picosecond pulse deposition to the dark core of the optical vortex, forming the silicon needle on a submicrosecond time scale. The needle was composed of monocrystalline silicon with the same lattice index (100) as that of the silicon substrate and had a height of approximately 14 μm and a thickness of approximately 3 μm. Overlaid vortex pulses allowed the needle to be shaped with a height of approximately 40 μm without any changes to the crystalline properties. Such a monocrystalline silicon needle can be applied to devices in many fields, such as core–shell structures for silicon photonics and photovoltaic devices as well as nano- or microelectromechanical systems.

Development of materials and fabrication techniques lead the growth of three-dimensional cell culture matrices in biomedical engineering. In this work, we present a method for fabricating self-standing fiber scaffolds by two-photon polymerization induced by a femtosecond laser. The aligned fibers are 330 μm long with a diameter of 6–9 μm. Depending on the pitch of the aligned fibers, various cell morphologies are distinguished via three-dimensional images. Furthermore, the morphologies of fibroblast cells (NIH-3T3) and epithelial cells (MDCK) on the fiber scaffolds are studied to show the effect of high curvature (3–4.5 μm radii) on cell morphology. NIH-3T3 cells that contain straight pattern of actin microfilament bundles are extended and partly wrap single fibers or tend to reside between fibers. On the other hand, MDCK cells that contain circular pattern of actin microfilament bundles cover the fiber peripheral surface exhibiting high aspect ratio elongation. These results indicate that cell morphology on fiber scaffolds is influenced by the pattern of actin microfilament bundles.

We propose a new technique of manipulating a metal particle in borosilicate glass. A metal particle that is heated by laser illumination heats the surrounding glass by radiation and conduction. A softened glass enabled metal particle migration. A 1-µm-thick platinum film was deposited on the back surface of a glass plate and irradiated with a green CW laser beam through the glass. As a result, the platinum film was melted and implanted into the glass as a particle. Platinum particles with diameters of 3 to 50 μm migrated at speeds up to 10 mm/s. In addition to platinum particles, nickel and austenitic stainless steel (SUS304) particles can be implanted.