Increased energy efficiency is one of the most effective ways to achieve climate change mitigation. This study aims to evaluate the energy efficiency of seventeen countries. The evaluation is based on an integrated method that combines the super slack-based (super SBM) model and the Malmquist productivity index (MPI) to investigate the energy efficiency of seventeen countries during the period of 2010–2015. The results in this study are that the United States, Columbia, Japan, China, and Saudi Arabia perform the best in energy efficiency, whereas Brazil, Russia, Indonesia, and India perform the worst during the entire sample period. The energy efficiency of these countries arrived mainly from technological improvement. The study provides suggestions for the seventeen countries’ government to control the energy consumption and contribute to environmental protection.
Scientists have found that nanomaterials possess many outstanding features in their tiny grain structure compared to other common materials. Titanium at the nano-grain scale shows many novel characteristics which demonstrate suitability for use in surgical implants. In general, equal channel angular pressing (ECAP) is the most popular and simple process to produce nano-titanium. However, ECAP is time-consuming, power-wasting, and insufficiently produces the ultrafine grain structure. Therefore, the objective of this research is to propose a new method to improve the ECAP’s performances to reach the ultrafine grain structure, and also to save production costs, based on the innovation theory of Teoriya Resheniya Izobreatatelskih Zadatch (TRIZ). Research results show that the process time is reduced by 80%, and 94% of the energy is saved. Moreover, the grain size of the diameter for nano-titanium can be reduced from 160 nanometers (nm) to 80 nm. The results are a 50% reduction of diameter and a 75% improvement of volume. At the same time, the method creates a refined grain size and good mechanical properties in the nano-titanium. The proposed method can be applied to produce any nanomaterial as well as biomaterials.
3 August 2016 in Journal of the Chinese Institute of Engineers
The purpose of the paper is to analyze the performance and design optimization of fuel temperature control in the injection combustion engine. There is a fuel temperature control device designed between the injection and fuel pump to cool down or warm up the fuel. Thermoelectric module (TEC) chips are applied in the device to absorb or dissipate heat from the fuel. There are several results relating exhaust emission and engine output performance to fuel temperature in this paper to display the optimization of fuel temperature for the injection engine. The experimental results indicate that increasing fuel temperature will result in an increase in CO, HC, and in a decrease in NOx. Increasing the fuel temperature may affect the fuel consumption and engine output for a gasoline engine at different A/F (air to fuel) ratios. With enhanced understanding and analyses, the effects of fuel temperature on engine performance, fuel consumption and emissions can be taken into account in engine design and evaluation.