Smoke plumes emitted from wildland-urban interface (WUI) wildfires contain toxic chemical substances that are harmful to human health, mainly due to the burning of synthetic components. Accurate measurement of these air toxics is necessary for understanding their impacts on human health. However, air pollution is typically measured using ground-based sensors, manned airplanes, or satellites, which all provide low-resolution data. Unmanned Aerial Vehicles (UAVs) have the potential to provide high-resolution spatial and temporal data due to their ability to hover in specific locations and maneuver with precise trajectories in 3-D space. This study investigates the use of an octocopter UAV, equipped with a customized air quality sensor package and a volatile organic compound (VOC) air sampler, for the purposes of collecting and analyzing air toxics data from wildfire plumes. The UAV prototype developed has been successfully tested during several prescribed fires conducted by the California Department of Forestry and Fire Protection (CAL FIRE). Data from these experiments were analyzed with emphasis on the relationship between the air toxics measured and the different types of vegetation/fuel burnt. BTEX compounds were found to be more abundant for hardwood burning compared to grassland burning, as expected.
Wildfires have the potential to cause severe damage to vegetation, property and most importantly, human life. In order to minimize these negative impacts, it is crucial that wildfires are detected at the earliest possible stages. A potential solution for early wildfire detection is to utilize unmanned aerial vehicles (UAVs) that are capable of tracking the chemical concentration gradient of smoke emitted by wildfires. A spatiotemporal model of wildfire smoke plume dynamics can allow for efficient tracking of the chemicals by utilizing both real-time information from sensors as well as future information from the model predictions. This study investigates a spatiotemporal modeling approach based on subspace identification (SID) to develop a data-driven smoke plume dynamics model for the purposes of early wildfire detection. The model was learned using CO2 concentration data which were collected using an air quality sensor package onboard a UAV during two prescribed burn experiments. Our model was evaluated by comparing the predicted values to the measured values at random locations and showed mean errors of 6.782 ppm and 30.01 ppm from the two experiments. Additionally, our model was shown to outperform the commonly used Gaussian puff model (GPM) which showed mean errors of 25.799 ppm and 104.492 ppm, respectively.