The accurate measurement of pulverized coal concentration (PCC) is crucial for optimizing the production efficiency and safety of coal-fired power plants. Traditional microwave attenuation methods typically rely on a single frequency for analysis while neglecting valuable information in the frequency domain, making them susceptible to the varying sensitivity of the signal at different frequencies. To address this issue, we proposed an innovative frequency selection method based on principal component analysis (PCA) and orthogonal matching pursuit (OMP) algorithms and implemented a multi-frequency microwave sensing system for PCC measurement. This method transcended the constraints of single-frequency analysis by employing a developed hardware system to control multiple working frequencies and signal paths. It measured insertion loss data across the sensor cross-section at various frequencies and utilized PCA to reduce the dimensionality of high-dimensional full-path insertion loss data. Subsequently, the OMP algorithm was applied to select the optimal frequency signal combination based on the contribution rates of the eigenvectors, enhancing the measurement accuracy through multi-dimensional fusion. The experimental results demonstrated that the multi-frequency microwave sensing system effectively extracted features from the high-dimensional PCC samples and selected the optimal frequency combination. Filed experiments conducted on five coal mills showed that, within a common PCC range of 0–0.5 kg/kg, the system achieved a minimum mean absolute error (MAE) of 1.41% and a correlation coefficient of 0.85. These results indicate that the system could quantitatively predict PCC and promptly detect PCC fluctuations, highlighting its immediacy and reliability.
The development of Large Language Models (LLMs) has sparked a new wave in the domain of knowledge engineering. To gain deeper insights into the transformations catalyzed by LLMs to the field of Knowledge Graphs, this paper conducted a research around Knowledge Graph Question Answer (KGQA) task, and summarized the application forms of LLMs in KGQA task as well as the performance enhancement they brought. First, the paper provided a concise and comprehensive introduction to the KGQA task, focusing on its definition, methods, datasets, and evaluation metrics. Then the application of LLMs in KGQA task was discussed. Next, using three typical KGQA datasets as references, the accuracy improvement of LLM-augmented KGQA methods was visually demonstrated. From the comparison of results, it could be found that using LLM as a module in the general framework of KGQA methods could effectively improve the accuracy of the answers. Moreover, with the advancement of technology, LLMs were expected to be break away from the general framework of KGQA methods and directly answer the KGQA questions in zero-shot scenarios. Finally, this paper provides an outlook on the challenges that exist when LLMs applied to KGQA task.
Simultaneous Localization and Mapping (SLAM) has long been a fundamental and challenging task in robotics literature, where safety and reliability are the critical issues for successfully autonomous applications of robots. Classically, the SLAM problem is tackled via probabilistic or optimization methods (such as EKF-SLAM, Fast-SLAM, and Graph-SLAM). Despite their strong performance in real-world scenarios, these methods may exhibit inconsistency, which is caused by the inherent characteristic of model linearization or Gaussian noise assumption. In this paper, we propose an alternative monocular SLAM algorithm which theoretically relies on interval analysis (iMonoSLAM), to pursue guaranteed rather than probabilistically defined solutions. We consistently modeled and initialized the SLAM problem with a bounded-error parametric model. The state estimation process is then cast into an Interval Constraint Satisfaction Problem (ICSP) and resolved through interval constraint propagation techniques without any linearization or Gaussian noise assumption. Furthermore, we theoretically prove the obtained consistency and propose a versatile method for numerical validation. To the best of our knowledge, this is the first time such a proof has been proposed. A plethora of numerical experiments are carried to validate the consistency, and a preliminary comparison with classical EKF-SLAM in different noisy situations is also presented. Our proposed iMonoSLAM shows outstanding performance in obtaining reliable solutions, highlighting the potential application prospect in safety-critical scenarios of mobile robots.
Accurate measurement of pulverized coal concentration (PCC) is crucial for optimizing the production efficiency and safety of coal-fired power plants. Traditional microwave attenuation methods typically rely on a single frequency for analysis while neglecting valuable information in the frequency domain, making them susceptible to the varying sensitivity of the signal at different frequencies. To address this issue, we propose an innovative frequency selection method based on principal component analysis (PCA) and orthogonal matching pursuit (OMP) algorithms and implement a multi-frequency microwave sensing system for PCC measurement. This method transcends the constraints of single-frequency analysis by employing a developed hardware system to control multiple working frequencies and signal paths. It measures insertion loss data across the sensor cross-section at various frequencies and utilizes PCA to reduce the dimensionality of the high-dimensional full-path insertion loss data. Subsequently, the OMP algorithm is applied to select the optimal frequency signal combination based on the contribution rates of the eigenvectors, enhancing measurement accuracy through multi-dimensional fusion. Experimental results demonstrate that the multi-frequency microwave sensing system effectively extracts features from high-dimensional PCC samples and selects the optimal frequency combination. Filed experiments conducted on five coal mills show that, within a common PCC range of 0–0.5 kg/kg, the system achieves a minimum mean absolute error (MAE) of 1.41% and a correlation coefficient of 0.85. These results indicate that the system can quantitatively predict PCC and promptly detect PCC fluctuations, highlighting its immediacy and reliability.