Constructors have always tried to use optimal building construction materials to have an energetically efficient building. It was determined that by insulating a building, the energy efficiency increases, but what about the efficiency of the used materials? Of course, every material comes with specific characteristics, but those characteristics are determined in a controlled environment. In our research we tried to determine that those material characteristics are the same when the material is used in a real environment. In this regard, we approached thermal imaging and data was processed using the flir-image-extractor-cli module in Python and FLIR Thermal Studio. Both image and data processing were grouped in specific scenarios, indoor and outdoor, for each insulation material. So, when comparing the temperature difference, we found that the contrast was influenced by the shooting angle and the reflections from the window. Furthermore, we can conclude that imaging, in terms of quantitative and qualitative temperature assessment for energy evaluation of a building, clearly demonstrates the value of the procedure as an aid to research investigations.
1 July 2020 in Romanian Journal of Transport Infrastructure
The importance of mastering the temperatures of laying and compacting the bituminous layers is addressed by a multitude of researches in the field, but the treatment of their control possibilities throughout the work surface is less addressed. Checking the temperatures through classical methods (usually point measurements with a manual thermometer or on the direction of the thermometer attached to the beam of the spreading-finishing machine) can outline an image of the working temperatures, but cannot certify that the entire surface of the layer is at the same temperature. This article presents a new method for monitoring bituminous layers during execution, on an experimental road sector, with the help of a UAV (UAV - Unmanned Aerial Vehicle), equipped with two image capture cameras (for the visible area and for the infrared field). Following the qualitative analysis of the thermal images, information is obtained regarding the place where there are anomalies of the temperature uniformity, on the surface of the freshly laid bituminous layer.
Nowadays, the engineering companies and contractors are facing challenges never experienced before. They are being charged with - and being held liable for - the health of the structures they create and maintain. To surmount these challenges, engineers need to be able to measure structural movements up to millimetre level accuracy. Accurate and timely information on the status of a structure is highly valuable to engineers. It enables them to compare the real world behaviour of a structure against the design and theoretical models. When empowered by such data, engineers can effectively and cost efficiently measure and maintain the health of vital infrastructure. This paper presents the interpretation of the draft tube topographical measurements in order to obtain its 3D model. Based on the documents made available by the beneficiary and the data obtained in situ, the modernization conclusions were presented.