Using airbags for ship launching is a technological innovation with promising implications for the shipbuilding industry. Considering the inefficiency and time consumption of the traditional Pinisi ship launching method, an airbags system is considered an alternative technology. This research involves a simulation of applying airbag technology for ship launch on the Pinisi Ship to assess stress concentration and magnitude. The Pinisi ship, airbags, and skates are designed in three dimensions on a real-size scale for analysis and then analysed using Finite Element Analysis (FEA) in ANSYS software. During the launch, the keel of the ship and airbags were subjected to a compressive force with a 3-millisecond analysis time. The stress and stress concentration levels in the Pinisi ship's structure vary between using airbags and the traditional launch method during launch. The ship's engine room bulkhead and the bow collision bulkhead structure underwent considerable tensile and compressive stresses in longitudinal and transverse orientations. The average maximum compressive stress and maximum tensile stress that occur in the longitudinal direction of the ship are around 50.2 MPa and 87.3 MPa, respectively. Compared to the maximum compressive stress, which accounts for 36% of the overall maximum stress encountered, the highest tensile stress experienced by the ship's structure is 64%.
5 June 2025 in Journal of Advanced Research in Applied Mechanics
One of the most significant forms of maritime transportation for tying together islands and coastal regions is ro-ro ferrying. Regarding the security of the cars being transported, Ro-Ro Ferry also confronts significant difficulties. incidents where the vehicle's ability to secure itself was compromised by forces of vertical and lateral acceleration when the beam sea was present. Researching an efficient vehicle fastening method is required to raise the ro-ro ferry's level of safety. To increase the safety of the ro-ro ferry, this study intends to carry out a preliminary evaluation and make recommendations about the quantity and kind of tie-downs in the lashing system. The FEM method—that is, the Ansys workbench—is employed in this investigation. For every kind of vehicle, the tie-downs is simulated to withstand stresses brought on by lateral and vertical acceleration forces. A number of lashing system angles are examined. According to the study's findings, the Truck 11 type vehicle's maximum equivalent stress when working on a 45-degree tie-downs is 36.08 MPa, while the Innova 2 vehicle's minimum equivalent stress is 13.59 MPa. When working on a tie-downs at a 70-degree angle, the highest equivalent stress for a Truck 11 vehicle is 47.95 MPa, while the minimum stress for an Innova 2 vehicle is 18.07 MPa. The tie-downs safety factor values in the lashing system range between 3.54 and 19. Because safety factor ≥ 3.5, it is the value is worth using. This is true for binding angles and all vehicle kinds.