Through in situ electron backscatter diffraction (EBSD) experiments, this paper uncovers dominant damage mechanisms in traditional magnesium alloys exhibiting deformation twinning. The findings emphasize the level of deleterious strain incompatibility induced by twin interaction with other deformation modes and microstructural defects. A double fiber obtained by plane-strain extrusion as a starting texture of AM30 magnesium alloy offered the opportunity to track deformation by EBSD in neighboring grains where some undergo profuse {1 0 1 2} twinning and others do not. For a tensile loading applied along extrusion transverse (ET) direction, those experiencing profuse twinning reveal a major effect of grain boundaries on non-Schmid behavior affecting twin variant selection and growth. Similarly, a neighboring grain, with its 〈c〉-axis oriented nearly perpendicular to tensile loading, showed an abnormally early nucleation of {1 0 1 1} contraction twins (2% strain) while the same {1 0 1 1} twin mode triggering under 〈c〉-axis uniaxial compression have higher value of critical resolved shear stress exceeding the values for pyramidal 〈c + a〉 dislocations. The difference in nucleation behavior of contraction vs. compression {1 0 1 1} twins is attributed to the hydrostatic stresses that promote the required atomic shuffles at the core of twinning disconnections.

Parsing the effect of slip-twin interactions on the strain rate and thermal sensitivities of Magnesium (Mg) alloys has been a challenging endeavor for scientists preoccupied with the mechanical behavior of hexagonal close-packed alloys, especially those with great latent economic potential such as Mg. One of the main barriers is the travail entailed in fitting the various stress–strain behaviors at different temperatures, strain rates, loading directions applied to different starting textures. Taking on this task for two different Mg alloys presenting different textures and as such various levels of slip-twin interactions were modeled using visco-plastic self-consistent (VPSC) code. A recently developed routine that captures dislocation transmutation by twinning interfaces on strain hardening within the twin lamellae was employed. While the strong texture was exemplified by traditional rolled AZ31 Mg alloys, the weak texture was represented by ZEK100 Mg alloy sheets. The transmutation model incorporated within a dislocation density based hardening model showed enhanced flexibility in predicting the complex strain rate and thermal sensitive behavior of Mg textures’ response to various mechanical loading schemes.

Single unit cell thick lattice frame materials have applications in efficient heat exchangers. This study is focused on strut-based sandwich-type configurations obtained through reticulation of unit cell topologies of tetrakaidecahedron (TKD), octet, and rhombic dodecahedron (DDC) shapes at a porosity of 0.9 with water as the working fluid. Interfacial heat transfer coefficient values on struts and endwalls were determined by imposing constant temperature boundary condition. Averaged heat transfer coefficient on the endwall was the highest for tetrakaidecahedron lattice whereas rhombic dodecahedron lattice exhibited the highest average interfacial heat transfer coefficients on the struts. Flow analysis showed the presence of strong secondary flow features on planes normal to the mean flow direction that demonstrated the unique flow mixing capabilities of these lattices. Reported interfacial heat transfer coefficient at struts and endwall can be used in volume-averaged computations of metal foams (representative of lattices' flow and thermal properties) under local thermal nonequilibrium.