He Wang

Dr. He Wang


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2020 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
LCLijie Chen
Lijie Chen
XCXuejun Chen
Xuejun Chen
XYXin Yang
Xin Yang
PBPengyan Bi
Pengyan Bi
XDXiang Ding
Xiang Ding
HWHe Wang
He Wang
The influence of precipitated calcium carbonate on the strength and microstructure of red clay was studied. Precipitated calcium carbonate was added to red clay at ratios of 0%, 5%, 10%, 15%, and 20%. Shear tests were carried out on the samples to observe the effect of calcium carbonate on the mechanical properties of red clay. The results showed that, with increasing calcium carbonate content, the strength of red clay first decreased and then increased. The maximum strength was obtained for the sample with 20% calcium carbonate. Scanning electron microscopy (SEM) was used to observe the changes in microstructure caused by addition of calcium carbonate. The pores and cracks analysis system (PCAS) was used to quantitatively characterize the microstructure changes detected in SEM images. The addition of calcium carbonate decreased the pore area and increased the total number of pores of red clay. The incorporation of calcium carbonate caused the red clay particles to agglomerate. The higher the calcium carbonate content, the stronger the agglomeration of red clay particles in the soil samples.

4 November 2020 in KSCE Journal of Civil Engineering
Verified
Journal Article
Open access
PDF file
LCLijie Chen
Lijie Chen
XCXuejun Chen
Xuejun Chen
HWHe Wang
He Wang
XHXiang Huang
Xiang Huang
YSYu Song
Yu Song
This research conducted a triaxial test on lime-treated clay with different contents to analyze the effect of mechanical properties. Scanning electron microscope (SEM) and low-field nuclear magnetic resonance (NMR) analysis were used to analyze the effect. X-ray diffraction (XRD) was used to analyze the chemical changes of calcium oxide on red clay. The results show that with the increase of calcium oxide content, the strength increases, and it can be increased by 282% at 200 kPa confining pressure. The calcium oxide in the red clay reacted with the water in the soil to form calcium hydroxide. The alkaline environment will erode the edge of the soil particles and cause pores to become larger. SEM observed that the addition of calcium oxide caused the agglomeration of soil particles and changed the pore structure of red clay. Low-field NMR showed that calcium oxide had a significant effect on the pore structure of red clay. Calcium oxide increased the total pore volume of the soil sample. Calcium oxide had a substantial influence on the three pore distribution ranges, I (1.1–11 µm), II (15–137 µm), and III (137–512 µm). The porosity fitted with shear strength, it negatively correlated with I and III, and positively correlated with II.

25 February 2016 in Journal of Macromolecular Science, Part B
Verified
Journal Article
Closed access
HWHe Wang
He Wang
YDYing Ding
Ying Ding
SZShugao Zhao
Shugao Zhao
The influence of three different co-agents, triallyl isocyanurate (TAIC), trimethylol propane trimethacrylate (TMPTMA) and high vinyl poly(butadiene) (HVPBd), on the curing characteristics, including the cure kinetics, of peroxide-cured EPDM compounds and the mechanical properties of the resulting EPDM vulcanizates were studied. The results showed that the addition of each co-agent could improve the cure extent of the EPDM samples; the hardness and modulus of the EPDM vulcanizates were also improved. In particular, the compound containing TAIC obtained the highest cure extent. However, the addition of TMPTMA negatively affected the scorch safety, especially below 165°C. From the cure kinetics of the EPDM compounds, obtained by using the cure data from a moving die rheometer, it was found that the Deng–Isayev, first-order and Hsich models showed better agreement with experimental data compared to the Kamal–Sourour model. The reaction rate constants were gradually increased with the elevated temperature, and TMPTMA could significantly promote the curing reaction rate, TAIC secondly, while HVPBd showed no effect. In addition, the apparent activation energy of all EPDM compounds, calculated by the Deng–Isayev model, was estimated slightly higher than that of the other three kinetic models. However, due to the addition of the three co-agents, the activation energy of the curing reaction decreased, with the EPDM compound with TAIC showing the lowest activation energy.

30 July 2022 in Polymer Testing
Verified
Journal Article
Open access
HWHe Wang
He Wang
WWWenhao Wang
Wenhao Wang
BWBen Wang
Ben Wang
HFHualin Fan
Hualin Fan

11 October 2024 in Scientific Reports
Verified
Journal Article
Open access
PDF file
LCLijie Chen
Lijie Chen
XWXiao Wang
Xiao Wang
QDQingyang Deng
Qingyang Deng
HWHe Wang
He Wang
BLBaoyou Luo
Baoyou Luo
TTTing Tang
Ting Tang
Red clay as a special soil has a high liquid-plastic limit, water swelling and water loss shrinkage. To solve the problems red clay was modified by calcium carbonate produced in Hezhou, Guangxi. The Liquid-plastic limit, water loss shrinkage, nuclear magnetic resonance (NMR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and consolidated drained (CD) triaxial shear test were carried out on the modified soils. The results show that when the calcium carbonate content is 20%, the plastic limit is 24.38 and the liquid limit is 38.67, which are reduced by 35.04% and 22.16%, respectively. The Montmorillonite content in the modified soil is reduced by 27.7%. The shrinkage coefficient decreased from 0.325 to 0.102. The NMR test shows that the content is 5% and 10% would lead to a decrease in the macropores and an increase in the micropores pores. The phenomenon is the opposite (15% and 20%). All contents led to the porosity increase. The calcium carbonate content of 5% was selected for triaxial shear tests to obtain the stress-strain curves. The Duncan-Zhang was used to predict the modified soil. The model has a large error in the prediction of the peak of the principal stress difference, but the overall trend is relatively consistent. Therefore, the correction coefficient related to the confining pressure was introduced. The corrected model fits the triaxial shear test well. The research provides a method for the liquid-plastic limits and shrinkage properties of modified red clay, explores the influence of calcium carbonate content on microscopic pores, and the correction of the model provides a theoretical basis for practical application.

1 September 2021 in Materials Today Communications
Verified
Journal Article
Closed access
WWWenhao Wang
Wenhao Wang
HWHe Wang
He Wang
HFHualin Fan
Hualin Fan