The composite floor system, composed of steel deck and concrete slab, generates more efficient and economical structures. On the other hand, the design of this type of structure has a high complexity level due to the consideration of several variables. In this respect, the objective of this paper is to present the formulation of the optimization problem for a composite floor system (steel and concrete) considering such environmental as economic impacts. To formulate the optimization problem, the reduction of environmental impact was adopted as an objective function - assuming the CO2 emission and the finance cost as parameters. The restrictions were taken by the limiting states imposed in standard NBR 8800:2008. The computer program was developed via Matlab R2016a and the optimization process was carried out using the Genetic Algorithm toolbox existing in this platform. Two application examples of the formulation at hand are presented: the first from the literature and the second from an existing building - in both situations the influences of different concrete compressive characteristic strengths were analyzed. The results of the optimization problem show a reduction in geometry and, consequently, in its weight. The solution found by the program reduces by up to 17.70% of CO2 emissions and 17.47% of the finance cost. When was applying different concrete compressive strengths, the optimal solution for environmental impact did not get the lowest cost. In general, the steel deck formwork obtained the highest percentage of environmental impact, while the beams and girders, with the same shape configuration, had the highest finance cost. Therefore, it is shown that the optimal design solution to CO2 emissions is not always the better solution for the finance cost.
1 January 2020 in Revista IBRACON de Estruturas e Materiais
The objective of this research is to create a software to optimize choice variables adopted by an engineer in a structural system with steel-concrete composite beams and steel decks, such as: beam shape, composite slab sheeting, number and spacing of beams, slab thickness and interaction ratio between beam and slab. To accomplish this, a program that uses the Genetic Algorithm optimization tool provided by Matlab R2015a was developed. To meet safety requirements, restrictions on the Ultimate Limit State were implemented in the code, following the normative requirements of ABNT NBR 8800: 2008. Case studies of a problem found in the literature and another of a real structure, are presented to serve as references for software evaluation. Results indicate that the use of optimization processes is fundamental to design increasingly cost-effective structures.
1 January 2023 in Revista IBRACON de Estruturas e Materiais
Reducing greenhouse gas emissions is one of the greatest challenges on this century [1 1 Intergovernmental Panel on Climate Change, Contribution of Working Groups I, II and III to the Fourth Assessment Report on Intergovernmental Panel on Climate Change: Climate Change 2007: Synthesis Report, Geneva, IPCC, 2007. ]. The IPCC’s Sixth Assessment Report estimates that the emission of greenhouse gases from human activities is responsible for approximately 1.1°C of warming compared to pre-industrial levels and it is expected to reach or exceed 1.5°C of warming [2 2 Intergovernmental Panel on Climate Change, Contribution of Working Group II to the Sixth Assessment Report of the Intergovernmental Panel on Climate Change: Climate Change 2022: Impacts, Adaptation, and Vulnerability, Cambridge, Cambridge University Press, 2022. ]. In 2020, even though the economic activity was severely reduced due to the pandemic, building construction demand for steel and cement was still responsible for 3.2 gigatons of CO2 in energy-related emissions and, thereby, contributing with 10% of global carbon emissions [3 3 UN Environment and International Energy Agency, 2020 Global Status Report for Buildings and Construction: Towards a Zero-Emission, Efficient, and Resilient Buildings and Construction Sector, Nairobi, United Nations Environment Programme, 2021. ]. Therefore, it is essential that actions are taken in favor of decreasing greenhouse gas emissions and avoiding even more consequences that arise from global warming.