Explore full metrics on Scilit
(Calculated once Scilit publication data is synced: current year − year of first publication + 1)
<mml:math display="inline"><mml:mrow><mml:mn>65</mml:mn><mml:mspace width="0.3em"></mml:mspace><mml:mi>nm</mml:mi></mml:mrow></mml:math>65nm technologies and below. These porous insulating films can be deposited by plasma-enhanced chemical vapor deposition using a porogen approach. It consists of the codeposition of a matrix precursor and a sacrificial organic porogen, and then on a post-treatment to remove the organic porogen phase and create porosity in the film. In this work, an e-beam assisted thermal curing was compared to an ultraviolet-assisted thermal curing. Basic film properties such as <mml:math display="inline"><mml:mrow><mml:mi>k</mml:mi></mml:mrow></mml:math>k , film shrinkage, porosity, pore size, and pore size distribution were evaluated. NMR and Fourier transform infrared analyses were used to study the chemical modifications induced by the post-treatment. These analyses show that the post-treatment impact depends on the radiation used. Both treatments lead to a removal of terminal nonbridging bonds such as <mml:math display="inline"><mml:mrow><mml:mi>Si</mml:mi><mml:mo>–</mml:mo><mml:mi>OH</mml:mi></mml:mrow></mml:math>Si–OH , <mml:math display="inline"><mml:mrow><mml:mi>Si</mml:mi><mml:mo>–</mml:mo><mml:mi mathvariant="normal">H</mml:mi></mml:mrow></mml:math>Si–H , and <mml:math display="inline"><mml:mrow><mml:mi>Si</mml:mi><mml:mo>–</mml:mo><mml:msub><mml:mi>CH</mml:mi><mml:mrow><mml:mn>3</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math>Si–CH3 and can contribute to a subsequent formation of <mml:math display="inline"><mml:mrow><mml:mi>Si</mml:mi><mml:mo>–</mml:mo><mml:mi mathvariant="normal">O</mml:mi><mml:mo>–</mml:mo><mml:mi>Si</mml:mi></mml:mrow></mml:math>Si–O–Si crosslinks. Both treatments remove methyls from <mml:math display="inline"><mml:mrow><mml:mi>Si</mml:mi><mml:mo>–</mml:mo><mml:msub><mml:mi>CH</mml:mi><mml:mrow><mml:mn>3</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math>Si–CH3 , but the e-beam induces a <mml:math display="inline"><mml:mrow><mml:mi>Si</mml:mi><mml:mo>–</mml:mo><mml:mi mathvariant="normal">H</mml:mi></mml:mrow></mml:math>Si–H bond increase while the UV bulb used decreases the <mml:math display="inline"><mml:mrow><mml:mi>Si</mml:mi><mml:mo>–</mml:mo><mml:mi mathvariant="normal">H</mml:mi></mml:mrow></mml:math>Si–H contribution. The cross-linking improvement induces an increase of Young’s modulus, the elastic properties being mainly correlated to the <mml:math display="inline"><mml:mrow><mml:mi>Si</mml:mi><mml:mo>–</mml:mo><mml:mi mathvariant="normal">O</mml:mi><mml:mo>–</mml:mo><mml:mi>Si</mml:mi></mml:mrow></mml:math>Si–O–Si volumic bond concentration in the film.No biography provided yet