In this work, the single-diode model is used to model the PV generator. Then, a numerical method is introduced to extract its five parameters using just the values of the key-points. To this end, we apply the I-V characteristic on the three remarkable points to get three equations with five unknowns. To complete the necessary system of five equations, the two other remaining equations are extracted as follow; the first, from the derivative of the equation linking the generator's current to its voltage. Second, an expression linking the fill-factor to the four parameters: Is, Rp, Rs and n is used as the fifth equation. This method is serves to extract the five parameters using five equations, without using any approximation. The accuracy of this approach is evaluated using experimental data for a solar cell, and extracted data from datasheet for a PV panel. Then, using some statistical indicators, this method has shown a good accuracy. Moreover, to get the values of the five parameters for non-standard conditions, and predict the I-V curves and the maximum power, a new analytical model of open-circuit voltage as a function of the module temperature and irradiance is presented as well in this paper.
17 July 2023 in Energy Conversion and Management: X
In this work, we present three new Mathematica [1] codes written to extract physical parameters of illuminated solar cell from its current-voltage characteristic. The solar cell is modelled by a circuit containing a p-n junction photocurrent Iph, a reverse saturation current Is, an ideality factor n, a shunt resistance RSH and a series resistance RS. The three codes are based on the following methods: the five points method [2], the Ortiz-conde method [3] and a new method developed in our laboratory, where we determine experimentally the value of series resistance RS, define a new variable x = V - RSI and fit numerically the expression of the current I as a function of x to the simulated data.