The oxidative transformation product of a common tire preservative, identified as N-(1,3-dimethylbutyl)-N′-phenyl-p-phenylenediamine quinone (6-PPDQ), has recently been found to contribute to “urban runoff mortality syndrome” in Coho salmon at nanogram per liter levels. Given the number of fish-bearing streams with multiple stormwater inputs, large-scale campaigns to identify 6-PPDQ sources and evaluate mitigation strategies will require sensitive, high-throughput analytical methods. We report the development and optimization of a direct sampling tandem mass spectrometry method for semiquantitative 6-PPDQ determinations using a thin polydimethylsiloxane membrane immersion probe. The method requires no sample cleanup steps or chromatographic separations, even in complex, heterogeneous samples. Quantitation is achieved by the method of standard additions, with a detection limit of 8 ng/L and a duty cycle of 15 min/sample. High-throughput screening provides semiquantitative concentrations with similar sensitivity and a full analytical duty cycle of 2.5 min/sample. Preliminary data and performance metrics are reported for 6-PPDQ present in representative environmental and stormwater samples. The method is readily adapted for real-time process monitoring, demonstrated by following the dissolution of 6-PPDQ from tire fragments and subsequent removal in response to added sorbents.
8 December 2021 in Environmental Science: Processes & Impacts
Microplastics in the environment are an emerging concern due to impacts on human and environmental health. In addition to direct effects on biota, microplastics influence the fate and distribution of trace organic contaminants through sorption and transport. Environmental weathering may influence the rate and extent of chemical sorption. Changes in the surface characteristics of four common plastics including low-density polyethylene (LDPE), high-density polyethylene (HDPE), polypropylene (PP), and polystyrene (PS) were followed under the influence of both artificial light (UV-B) and natural sunlight for up to six months. Attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectra were collected at regular intervals. Principal component analysis (PCA) of the full dataset of UV-B weathered samples (n >500 spectra) simultaneously discriminated plastic type and extent of photochemical weathering. The magnitude of PCA scores correlated with exposure time and the loadings were consistent with surface chemistry changes including photooxidation. Projecting sunlight and UV-C exposed samples onto this PCA model demonstrated that similar chemical changes occurred, albeit at different rates. The results were compared to the carbonyl index (CI) with similar weathering trends indicating PP weathered at a faster initial rate than LDPE and HDPE. We propose that a multivariate approach is more widely applicable than CI as illustrated by PS, which lacked a stable reference peak. Kinetic analysis of the time series indicated that outdoor weathering occurred 5–12 times slower than the artificial exposure used here, depending on the plastic and the light source employed. The results provide unique insights into weathering processes and the photochemical age of naturally weathered plastics.
6PPDQ is a tire-derived contaminant toxic to coho salmon (LC50 = 41-95 ng/L) found widely distributed in urban environments. Most monitoring efforts have relied on relatively few discrete samples collected at select locations across rain events. Early work has revealed that 6PPDQ concentrations vary widely over time and space, raising questions about when and where to collect samples. Here, we employ condensed phase membrane introduction mass spectrometry, a high-throughput analysis approach to characterize spatiotemporal variability of 6PPDQ in urban streams. Analytical method detection limits of 0.3-8 ng/L and a duty cycle of 2.5 min/sample enabled high-throughput adaptive sampling. Temporal sampling revealed dynamic 6PPDQ concentrations, with significant changes occurring over minutes during peak rainfall. Spatial variability was characterized at multiple sites along three watercourses during the first significant precipitation of autumn 2023 on central Vancouver Island, B.C., Canada. Site-specific concentrations suggest attenuation of 6PPDQ after point source inputs by some combination of physical (dilution, sorption) or chemical (degradation) processes. This is the first report of an intensive sampling campaign describing the spatiotemporal distribution of 6PPDQ, highlighting the need for careful consideration of sampling strategies to evaluate the risk and impact of 6PPDQ in urban waterways.
5 December 2014 in Journal of the American Society for Mass Spectrometry