Ultrasonic vibration (UV) has been employed in various plastic forming processes due to its special effect known as acoustoplasticity. Mostly, UV is applied along the longitudinal direction in experimental investigations. However, very few studies have focused on normal UV-assisted uniaxial tension, which is more similar to the loading state of sheet metal in actual forming processes. Herein, normal UV-assisted tension tests on a TA1 thin sheet are performed to study its mechanical properties and microstructure evolution. The macro-mechanical behavior is demonstrated by stress–strain curves under different ultrasonic amplitudes and strain rates. Fracture morphology and microstructure evolution are characterized by scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD) to reveal the UV softening mechanism at the micro level. The results show that the stress reduction induced by UV reaches 20% when the ultrasonic amplitude is 13.9 μm. Fracture mode changes from ductile fracture to brittle fracture with increasing amplitude. Microstructure examinations show that low-angle grain boundary (LAGB) fraction, kernel average misorientation (KAM), and geometrically necessary dislocation (GND) density in the samples experiencing normal UV-assisted tension are all decreased, leading to a reduction in deformation resistance. The inverse pole figures (IPFs) further reveal that the plastic deformation mechanism of the TA1 thin sheet is diversified with the superposition of normal UV.
Ultrasonic vibration (UV)-assisted forming technology has emerged as a significant advancement in the field of bulk micro-forming. This study presents a comprehensive experimental investigation into the micro-scale deformation behavior of metallic materials and its influence on size effects under UV, with a specific focus on the UV-assisted T-shaped micro-upsetting of T2 copper. Utilizing a custom-designed UV-assisted micro-upsetting apparatus, the flow stress, filling height, and microstructural evolution of T2 copper are systematically examined, considering various grain sizes, die opening angles, and ultrasonic amplitudes. The findings demonstrate that UV significantly mitigates the influence of grain size effects. Notably, the softening effect induced by UV becomes more pronounced with decreasing grain size, concomitantly leading to increased filling height. As the die opening angle expands, the required forming load increases. The enhancement of ultrasonic amplitude not only increases the V-groove filling height but also improves the surface quality. The optimal V-groove filling performance is achieved at an ultrasonic amplitude of 8.01 μm. It is crucial to note that increased ultrasonic amplitude generally improves forming performance, while excessive ultrasonic amplitude may lead to micro-crack formation within the material, thereby decreasing the formability of T2 copper. These results provide valuable insights into the complex interplay between ultrasonic parameters and material response in micro-forming processes, offering significant implications for the optimization of UV-assisted forming technologies in precision manufacturing applications.