For the recycling of biomass conversion materials, this experiment was conducted to investigate plant nutrient releasing characteristics, and to determine an optimum blended ratio of biochar for producing a biochar pellet based on a column leaching study. The treatments consisted of only pig manure compost (PMC) as a control, pig manure compost pellets (PMCP), and biochar pellets (BCP) blended with biochar and pig manure compost with the following ratios: 9:1, 8:2, 4:6, and 2:8. Results showed that the accumulated amount of ammonium nitrogen (NH4-N) was in order of PMC > PMCP > BCP (2:8) > BCP (4:6) > BCP (8:2) > BCP (9:1) ratios. The highest accumulated amounts of phosphate phosphorus (PO4-P) and potassium (K) were 1953 and 1917 mg L−1 in the PMC and PMCP, but the lowest in the BCP (9:1) were 223 and 1078 mg L−1, respectively. It was shown that the highest accumulated amount of silicon dioxide (SiO2) was 2329 mg L−1 in the BCP (8:2), but the lowest in the PMC was 985 mg L−1. The estimations for accumulated NH4-N, PO4-P, K, and SiO2 releasing amounts in all the treatments were significantly fitted with a modified Hyperbola model. The optimum mixing rate was estimated to be BCP (2:8). Therefore, biochar pellets might be useful in obtaining basic information on slow-release fertilizer for sustainable agriculture.
The nutrient releasing characteristics of a blended biochar pellet comprising a mixture of biochar and pig manure compost ratio (4:6) uploaded with nitrogen (N), phosphorus (P) and potassium (K) nutrient solutions were investigated with the application of a modified Hyperbola model during a 77-day precipitation period. The experiment consisted of five treatments, i.e., the control, as 100% pig manure compost pellet (PMCP), a urea solution made at room temperature (TN), a urea solution heated to 60 °C (HTN), N, P and K solutions made at room temperature (TNPK), and N, P and K solutions heated to 60 °C (HTNPK). The cumulative ammonium nitrogen (NH4-N) in the blended biochar pellets was slow released over the 77 days of precipitation period, but nitrite nitrogen (NO3-N) was rapidly released, i.e., within 15 days of precipitation (Phase I), close behind on a slower release rate within the final precipitation (Phase II). Accumulated phosphate phosphorus (PO4-P) concentrations were not much different, and slowly released until the final precipitation period, while the highest accumulated K amount was 2493.8 mg L−1 in the TNPK at 8 days, which then remained at a stage state of K. Accumulated silicon dioxide (SiO2) concentrations abruptly increased until 20 days of precipitation, regardless of treatments. For the application of the releasing model for nutrient releasing characteristics, the estimations of accumulated NH4-N, NO3-N, PO4-P, K and SiO2 in all the treatments were significantly (p < 0.01) fitted with a modified Hyperbola model. These findings indicate that blended biochar pellets can be used as a slow release fertilizer for agricultural practices.
30 September 2017 in The Korean Journal of Pesticide Science
The agro-environmental impact of supplemented biochar manure pellet fertilizer (SBMPF) application was evaluated by exploring changes of the chemical properties of paddy water and soil, carbon sequestration, and grain yield during rice cultivation. The treatments consisted of (1) the control (no biochar), (2) pig manure compost pellet (PMCP), (3) biochar manure pellets (BMP) with urea solution heated at 60 °C (BMP-U60), (4) BMP with N, P, and K solutions at room temperature (BMP-NPK), and (5) BMP with urea and K solutions at room temperature (BMP-UK). The NO3−–N and PO4−–P concentrations in the control and PMCP in the paddy water were relatively higher compared to SBMPF applied plots. For paddy soil, NH4+–N concentration in the control was lower compared to the other SBMPFs treatments 41 days after rice transplant. Additionally, it is possible that the SBMPFs could decrease the phosphorus levels in agricultural ecosystems. Also, the highest carbon sequestration was 2.67 tonnes C ha−1 in the BMP-UK treatment, while the lowest was 1.14 tonnes C ha−1 in the BMP-U60 treatment. The grain yields from the SBMPFs treatments except for the BMP-UK were significantly higher than the control. Overall, it appeared that the supplemented BMP-NPK application was one of the best SBMPFs considered with respect to agro-environmental impacts during rice cultivation.
Ionomics, the study of the composition of mineral nutrients and trace elements in organisms that represent the inorganic component of cells and tissues, has been widely studied to explore to unravel the molecular mechanism regulating the elemental composition of plants. However, the genetic factors of rice subspecies in the interaction between arsenic and functional ions have not yet been explained. Here, the correlation between As and eight essential ions in a rice core collection was analyzed, taking into account growing condition and genetic factors. The results demonstrated that the correlation between As and essential ions was affected by genetic factors and growing condition, but it was confirmed that the genetic factor was slightly larger with the heritability for arsenic content at 53%. In particular, the cluster coefficient of japonica (0.428) was larger than that of indica (0.414) in the co-expression network analysis for 23 arsenic genes, and it was confirmed that the distance between genes involved in As induction and detoxification of japonica was far than that of indica. These findings provide evidence that japonica populations could accumulate more As than indica populations. In addition, the cis-eQTLs of AIR2 (arsenic-induced RING finger protein) were isolated through transcriptome-wide association studies, and it was confirmed that AIR2 expression levels of indica were lower than those of japonica. This was consistent with the functional haplotype results for the genome sequence of AIR2, and finally, eight rice varieties with low AIR2 expression and arsenic content were selected. In addition, As-related QTLs were identified on chromosomes 5 and 6 under flooded and intermittently flooded conditions through genome-scale profiling. Taken together, these results might assist in developing markers and breeding plans to reduce toxic element content and breeding high-quality rice varieties in future.
Background: Rice is a major food resource for Asian countries including Korea. However, most Asian countries are facing food safety problems due to cropland contamination by heavy metals. Thus, this study was conducted to investigate genetic factors affecting the expression of cadmium (Cd) gene, and to confirm differences in Cd translocation among cultivars because the current molecular understanding of Cd uptake-transport mechanisms remains insufficient. Associations between genotypes and gene expression level of Cd-related genes such as NRAMP, MTP, and HMA gene families in the rice core collection were analyzed at the genomic level. Results: Os01g0956700, Os05g0128400 and Os11g0485200 showed strong associations between expression level and genotype in the rice core collection, the regulatory factors that associated with these genes in cis and trans were founded. The association between the expression level and genotype of the candidate gene (Os01g0611300: metal tolerance protein) predicted to affect Cd content in rice by a previous genome-wide association study (GWAS) was also analyzed. Furthermore, as a result of the phylogeny and haplotype analyses of the candidate gene, high-Cd tolerance cultivars were selected. The correlations between Cd and other inorganic components (Mg, Mn, Fe, Cu and Zn) in the roots, stems, leaves and unpolished grain of selected rice cultivars were analyzed. Conclusion: Therefore, these results may be useful for understanding the uptake-transport mechanisms of Cd and other inorganic components via molecular genetics and may help rice breeders develop new low-Cd cultivars in the near future.