High-quality perovskite light harvesters and robust organic hole extraction layers are essential for achieving high-performing perovskite solar cells (PSCs). We introduce a phosphonic acid–functionalized fullerene derivative in mixed-cation perovskites as a grain boundary modulator to consolidate the crystal structure, which enhances the tolerance of the film against illumination, heat, and moisture. We also developed a redox-active radical polymer, poly(oxoammonium salt), that can effectively p-dope the hole-transporting material by hole injection and that also mitigates lithium ion diffusion. Power conversion efficiencies of 23.5% for 1-square-centimeter mixed–cation-anion PSCs and 21.4% for 17.1-square-centimeter minimodules were achieved. The PSCs retained 95.5% of their initial efficiencies after 3265 hours at maximum power point tracking under continuous 1-sun illumination at 70° ± 5°C.
Cryogenic transmission electron microscopy (cryo-TEM) is a valuable tool recently proposed to investigate battery electrodes. Despite being employed for Li-based battery materials, cryo-TEM measurements for Na-based electrochemical energy storage systems are not commonly reported. In particular, elucidating the chemical and morphological behavior of the Na-metal electrode in contact with a non-aqueous liquid electrolyte solution could provide useful insights that may lead to a better understanding of metal cells during operation. Here, using cryo-TEM, we investigate the effect of fluoroethylene carbonate (FEC) additive on the solid electrolyte interphase (SEI) structure of a Na-metal electrode. Without FEC, the NaPF6-containing carbonate-based electrolyte reacts with the metal electrode to produce an unstable SEI, rich in Na2CO3 and Na3PO4, which constantly consumes the sodium reservoir of the cell during cycling. When FEC is used, the Na-metal electrode forms a multilayer SEI structure comprising an outer NaF-rich amorphous phase and an inner Na3PO4 phase. This layered structure stabilizes the SEI and prevents further reactions between the electrolyte and the Na metal.
25 January 2022 in Journal of the American Chemical Society
The structure of lithium (Li) metal anode, including the Li metal and the solid electrolyte interphase (SEI), is critical to the investigation of cycle stability or decay mechanisms. The three-dimensional (3D) visualization of Li metal and SEI, however, has not been demonstrated yet, owing to the lack of 3D characterization techniques and the susceptibility of Li metal anode toward oxygen, moisture, as well as electron beam. Herein, we introduce a successful 3D presentation of deposited Li metal and SEI established via low-dose cryogenic electron microscopy tomography. The Li metal anode is imaged in low-dose mode at different tilt angles and then aligned and reconstructed into a 3D image through an expectation-maximization algorithm. The spherical Li deposits and SEI are confirmed in the 3D tomography of Li metal anode. It is also discovered that the Li metal corrodes and SEI turns concave owing to possible self-discharge after long-time rest.