Double dipoles on a single-layer substrate are utilized to construct a triple-mode printed quasi-Yagi antenna for the multi-band and broadband antenna applications. A stub-loaded dipole generating two resonant modes (i.e., lower dual-mode dipole) is allocated on the underside of a simple dipole (i.e., upper single-mode dipole) introducing the third resonant mode. Using these three resonant modes, three compact printed quasi-Yagi antennas, i.e., tri-band, dual-band and broadband printed quasi-Yagi antennas, are designed with the same antenna prototype but different parameter values. Seen from the measured results, all of these three antennas have good unidirectional radiations, high radiation efficiencies and low cross-polarization levels at the operating frequencies within the impedance bandwidths.
8 February 2023 in IEEE Transactions on Antennas and Propagation
Single-layer dual-/tri-band substrate integrated waveguide (SIW) filtenna based on multifunctional cavity-backed slots is proposed in this communication. The cavity-backed slots etched on the SIW cavity can be considered as radiators as well as resonators. When a pair of back-to-back open-loop slots embedded with a straight slot are etched on the SIW cavity, three resonant modes generated by slots combine with TE 101 mode of the SIW cavity to form the superior dual-band filtering response. Moreover, four radiation nulls (RNs) located at both sides of two operational passbands are generated, resulting in the sharp roll-offs and deep stopband rejection. To further prove this design concept, a tri-band SIW filtenna is designed by utilizing two pairs of back-to-back open-loop slots embedded with a straight slot, six RNs are introduced in the stopbands, realizing the excellent tri-band filtering performance. The operating mechanism of the proposed antennas is numerically analyzed. Two prototype antennas are fabricated and tested to validation, the center frequencies of the dual-band filtenna are 4.56 and 5.7 GHz, and the tri-band filtenna are centered at 4.1, 4.82 and 5.62 GHz, showing good radiation characteristics in each passband. Compared with other designs, the proposed antennas exhibit the advantages of single-layer structure, small size and high selectivity, satisfying the requirements of 5G multi-frequency communication applications.
1 October 2023 in IEEE Transactions on Components, Packaging and Manufacturing Technology
This paper presents a mechanical reliability study of 3-dB waveguide hybrid couplers in submillimeter and terahertz bands. To show the necessity of improvi
29 October 2019 in IEEE Transactions on Microwave Theory and Techniques