Hydraulic fracturing can improve the permeability of coalbed methane (CBM) reservoirs effectively, which is of great significance to the commercial production of CBM. However, the efficiency of hydraulic fracturing is affected by multiple factors. The mechanism of fracture initiation, morphology and propagation in CBM reservoirs is not clear and need to be further explored. Hydraulic fracturing experiment is an accurate tool to explore these mechanisms. The quantity of experimental coal rock is large and processing method is complex, so specimen made of similar materials was applied to replace coal rock. The true triaxial hydraulic fracturing experimental apparatus, 3D scanning device for coal rock section were applied to carry out hydraulic fracturing experiment. The results show that the initiation pressure is inversely proportional to the horizontal stress difference (Δσ) and positively related to fracturing fluid injection rate. When vertical stress (σv) is constant, the initiation pressure and fracture width decrease with the increasing of Δσ. Natural fractures can be connected by main fracture when propagates perpendicular to the direction of minimum horizontal stress (σh), then secondary fractures and fracture network form in CBM reservoirs. When two stresses of crustal stress are close and far different from the third one, the fracture morphology and propagation become complex. Influenced by perforations and filtration of fracturing fluid in specimen, fracturing fluid flows to downward easily after comparing horizontal well fracturing with vertical well fracturing. Fracture width increases with the decreasing of elastic modulus, the intensity of fracture is positively related with the elastic modulus of coal rock. The research results can provide theoretical basis and technical support for the efficient development of CBM.
The technical principle of gas drainage using high-level directional extraction boreholes was analyzed. A range of overburden strata was stimulated for pressure relief during mining, the effects of different borehole parameters on gas flow in the goaf and gas concentration in the upper corner were compared, and a field test was conducted to analyze the effect and peculiarities of gas drainage. With the mining of the work plane, overburden mining fissures gradually develop forward and upward, showing a “saddle” shape along the coal seam. The fissures in the middle zone of the goaf are gradually compacted, and a gas accumulation zone is formed around the goaf. High-level directional extraction boreholes arranged in an ellipsoidal belt at the side of the air return can achieve efficient gas extraction in the roof fissure belt. Numerical simulation results showed that the height of the fully depressurized area was 65 m from the roof of the coal seam. In addition, three high-level directional extraction boreholes were drilled in the roof of the coal seam. The gas extraction concentration and gas extraction pure volume of these three boreholes first increased, then decreased, and finally tended to be stable. The sequence of their average values was borehole No.2 > No.3 (twice as much) and > No.1 (2.7 times as much), which are closely related to the evolution law of overburden mining fissures. The research results can provide a reference for the further study of gas extraction technology using high-level directional extraction boreholes in coal and gas outburst seams.
Vertical fracture propagation mechanism is important to understand the effect of hydraulic fracturing on the roof of outburst coal seams. In this paper, the differences in physical parameters and in situ stress between an outburst coal seam and its roof strata were compared, and influencing factors of roof-fracturing fractures connecting coal seams were vertically analyzed. The impact of different fracturing strata and injection rates on fracture propagation was studied by numerical models. Results show that the horizontal principal stress of an outburst coal seam is less than that of roof strata, and the fracture length of roof fracturing is larger than that of an outburst coal seam. Roof-fracturing fracture of an outburst coal seam has the material conditions to communicate downward with the coal seam. The downward propagation height of roof-fracturing fracture is positively correlated with the minimum horizontal stress difference between an outburst coal seam and its roof strata. Soft coal fracturing cannot form a long fracture dominated by tensile failure, so the coal seam can be communicated by transforming the roof strata of soft coal to form vertical fractures. The injection rate affects the failure location, fracture width, and fracture-propagation path of the numerical model. Construction parameters should be reasonably designed in accordance with the physical parameters of coal and rock, construction displacement, and in situ stress. These research results can provide a theoretical basis and data support for the design, and optimization of construction parameters of roof fracturing in outburst coal seams.