Tarek KENDJOUH

Mr. Tarek KENDJOUH

electrical engineering, University of Sciences and Technology "Houari > Boumédiene" (USTHB) BP 32, Elalia, 16111, Bab Ezzouar,, Algiers, Alger, Algeria
orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 May 2023 in Actuators
Verified
Journal Article
Open access
PDF file
TKTarek KENDJOUH
Tarek KENDJOUH
CGCHERIF GUERROUDJ
CHERIF GUERROUDJ
Jean-Frederic CharpentierJean-Frederic Charpentier
Jean-Frederic Charpentier
NBNicolas Bracikowski
Nicolas Bracikowski
LHLarbi Hadjout
Larbi Hadjout
BLBekhouche Lemnouer
Bekhouche Lemnouer
This article deals with the performance improvement of a toothed pole variable reluctance machine excited by permanent magnets housed in the stator yoke. The objective was to reduce the electromagnetic torque ripples caused by the structure geometry and by the supply technique. The machine was designed to meet the specifications of a small wind energy conversion system. The proposed solution improved the electromagnetic design of the new structure in order to minimize the variation of the reluctance. This improvement was obtained by action on the geometry of the structure (the location of the permanent magnets), by action on the stator and rotor tooth pitch, and by the application of an indirect control strategy called torque sharing function. The PSO optimization algorithm was applied in the first part for the optimization of the machine’s global parameters to maximize torque density and then, in the second part, for the research of the optimum tooth pitch parameters to minimize torque ripple. Static and dynamic performances were obtained using 2D-FEM and MATLAB/Simulink software. The results reveal that by action on the stator/rotor tooth pitch, the ripple torque was reduced by about 53%, and by approximately 76% with the used command technique.

6 April 2023 in Actuators
Verified
Journal Article
Open access
PDF file
ARAziz Remli
Aziz Remli
CGCHERIF GUERROUDJ
CHERIF GUERROUDJ
Jean-Frederic CharpentierJean-Frederic Charpentier
Jean-Frederic Charpentier
TKTarek KENDJOUH
Tarek KENDJOUH
NBNicolas Bracikowski
Nicolas Bracikowski
Yannis KarnavasYannis Karnavas
Yannis Karnavas
This paper deals with the analysis of the dynamic performance of a generator with a doubly salient exterior rotor excited by permanent magnets inserted in the stator yoke. The electrical generator works at low speed and is devoted to a wind energy conversion system. Indeed, the studied generator is a robust high-torque machine and can be directly coupled to the turbine blades. It must therefore assure the energy conversion for wind speeds lower or higher than its base speed. In fact, the control technique used in this work covers the two main operating zones: below the base speed and above it. In the first case, the maximum torque per ampere control law is developed; however, when the base speed is reached, the flux decay control law is implemented and, consequently, the system works above the nominal conditions. Fuzzy logic controllers are employed to regulate direct and quadrature machine currents and DC voltage in order to obtain satisfactory regulation performances. The ensemble of the wind turbine and electrical machine with technical control is performed in Matlab/Simulink software. The simulation results obtained show the capability of the machine to operate at variable speeds, ensuring efficient energy conversion under and over the nominal speed.