Carlos Berlanga

Dr. Carlos Berlanga

orcid

Research Focus & Metrics

Academic Career Length

24Years (2003-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 October 2020 in Metals
Verified
Journal Article
Open access
PDF file
Carlos BerlangaCarlos Berlanga
Carlos Berlanga
María Victoria BiezmaMaría Victoria Biezma
María Victoria Biezma
Pedro J. RiveroPedro J. Rivero
Pedro J. Rivero
Research on corrosion resistance of cast aluminum alloys is reviewed in this article. The effect of the main microstructural features of cast aluminum alloys such as secondary dendrite arm spacing (SDAS), eutectic silicon morphology, grain size, macrosegregation, microsegregation, and intermetallic compounds is discussed. Moreover, the corrosion resistance of cast aluminum alloys obtained by modern manufacturing processes such as semi-solid and additive manufacturing are analyzed. Finally, the protective effects provided by different coatings on the aluminum cast alloys—such as anodized, plasma electrolytic oxidation (PEO), and laser—is reviewed. Some conclusions and future guidelines for future works are proposed.

1 October 2017 in Applied Surface Science
Verified
Journal Article
Closed access
JMJuan Deyo Maeztu
Juan Deyo Maeztu
Pedro J. RiveroPedro J. Rivero
Pedro J. Rivero
Carlos BerlangaCarlos Berlanga
Carlos Berlanga
DBDavid M. Bastidas
David M. Bastidas
JPJOSE PALACIO
JOSE PALACIO
Rafael RodriguezRafael Rodriguez
Rafael Rodriguez

14 June 2017 in Metals
Verified
Journal Article
Open access
PDF file
GAGorka Argandoña
Gorka Argandoña
JPJOSE PALACIO
JOSE PALACIO
Carlos BerlangaCarlos Berlanga
Carlos Berlanga
María Victoria BiezmaMaría Victoria Biezma
María Victoria Biezma
Pedro J. RiveroPedro J. Rivero
Pedro J. Rivero
Rafael RodriguezRafael Rodriguez
Rafael Rodriguez
The aim of this work is to study the hardness of the ferrite, austenite and sigma phases of a UNS S32760 superduplex stainless steel submitted to different thermal treatments, thus leading to different percentages of the mentioned phases. A comparative study has been performed in order to evaluate the resulting mechanical properties of these phases by using hardness, microhardness and nanoindentation techniques. In addition, optical microscopy, scanning electron microscopy (SEM) and X-ray diffraction (XRD) have been also used to identify their presence and distribution. Finally, the experimental results have shown that the resulting hardness values were increased as a function of a longer heat treatment duration which it is associated to the formation of a higher percentage of the sigma phase. However, nanoindentation hardness measurements of this sigma phase showed lower values than expected, being a combination of two main factors, namely the complexity of the sigma phase structure as well as the surface finish (roughness).

27 March 2019 in Coatings
Verified
Journal Article
Open access
PDF file
AIAlvaro Iribarren
Alvaro Iribarren
Pedro J. RiveroPedro J. Rivero
Pedro J. Rivero
Carlos BerlangaCarlos Berlanga
Carlos Berlanga
SLSilvia Larumbe
Silvia Larumbe
AMAdrian Miguel
Adrian Miguel
Rafael RodriguezRafael Rodriguez
Rafael Rodriguez
This paper reports the use of the electrospinning technique for the synthesis of nanocomposite micro/nanofibers by combining a polymeric precursor with hydrophobic behavior like polyvinyl chloride (PVC) with nanoparticles of a corrosion inhibitor like ZnO. These electrospun fibers were deposited on substrates of the aluminum alloy 6061T6 until forming a coating around 100 μm. The effect of varying the different electrospinning deposition parameters (mostly applied voltage and flow-rate) was exhaustively analyzed in order to optimize the coating properties. Several microscopy and analysis techniques have been employed, including optical microscopy (OM), field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). Water contact angle (WCA) measurements have been carried out in order to corroborate the coating hydrophobicity. Finally, their corrosion behavior has been evaluated by electrochemical tests (Tafel curves and pitting potential measurements), showing a relevant improvement in the resultant corrosion resistance of the coated aluminum alloys.

18 December 2018 in Metals
Verified
Journal Article
Open access
PDF file
Pedro J. RiveroPedro J. Rivero
Pedro J. Rivero
JMJuan Deyo Maeztu
Juan Deyo Maeztu
Carlos BerlangaCarlos Berlanga
Carlos Berlanga
AMAdrian Miguel
Adrian Miguel
JPJOSE PALACIO
JOSE PALACIO
Rafael RodriguezRafael Rodriguez
Rafael Rodriguez
In this work, layers of a sol-gel hybrid matrix doped with metal oxide nanoparticles (TiO2 NPs) have been deposited on flat samples of AA6061-T6 aluminum alloy using the dip-coating technique, with the aim of obtaining coatings with better anti-corrosive and hydrophobic properties. Two different organic modified silica alkoxides, namely 3-(glycidyloxypropyl)trimethoxysilane (GPTMS) and methyltriethoxysilane (MTEOS), have been used for an adequate entrapment of the metal oxide nanoparticles. In addition, a fluorinated metal-alkoxide precursor has also been added to the hybrid matrix in order to improve the hydrophobic behavior. The experimental results corroborate that the presence of these TiO2 NPs play an important role in the development of the sol-gel hybrid coatings. The water contact angle (WCA) measurements, as well as pencil hardness tests indicate that TiO2 NPs make a considerable increase in the resultant hydrophobicity possible, with better mechanical properties of the coatings. The coating thickness has been measured by cross-section scanning electron microscopy (SEM). In addition, a glow discharge optical emission spectroscopy (GD-OES) analysis has been carried out in order to corroborate the adequate entrapment of the TiO2 NPs into the sol-gel coatings. Finally, potentiodynamic polarization tests and electrochemical impedance spectroscopy (EIS) have been performed in order to evaluate the corrosion resistance of the coatings. All the results provide insights into the efficacy of the developed sol-gel hybrid coatings for anticorrosive purposes with good mechanical properties.

7 June 2013 in Materials Research
Verified
Journal Article
Open access
PDF file
María Victoria BiezmaMaría Victoria Biezma
María Victoria Biezma
Carlos BerlangaCarlos Berlanga
Carlos Berlanga
GAGorka Argandona
Gorka Argandona