In the aerospace industry, high-precision components like impellers and blisks present considerable challenges in machining due to their intricate geometries and the need for reliable performance. Blades, often classified as thin-walled parts with complex, free-form surfaces, are crucial in ensuring the efficiency and safety of aircraft engines. Their geometries and materials require strict control over cutting parameters, such as tool path and orientation, to avoid deformation and maintain surface integrity. This study investigates the impact of tilt angle variation during ball end milling of Ti6Al4V thin-walled parts. Four different tilt angles (15°, 30°, 45°, and 60°) were analysed to evaluate their effect on dimensional accuracy and surface roughness. The results show that tilt angle significantly influences surface quality and dimensional precision. A tilt angle of 30° achieved the best balance between surface finish and dimensional tolerances, with flatness values ranging from 0.038 mm at 30° to 0.101 mm at 60°, representing a 152.5% increase in flatness. The findings provide practical guidelines for optimizing ball end milling of thin-walled components, emphasizing the importance of tool orientation in reducing deformation and enhancing surface quality.

Currently, some high-value-added applications involve the manufacturing of curved surfaces, where it is challenging to achieve surface accuracy, repeatability, and productivity simultaneously. Among free-form surfaces, curved surfaces are commonly used in blades and airfoils (with a teardrop-shaped cross-section) and optical systems (with axial symmetry). In both cases, multi-axis milling accuracy directly affects the subsequent process step. Therefore, reducing even insignificant errors during machining can improve the accuracy in the final production stages. This study proposes an “evolution” method to improve the machining accuracy of curved surfaces. The key is to include compensation for the machining error after the first part through profile error measurement. Thus, correction can be applied directly after the manufacturing programming is fully developed, achieving the product with the minimum number of iterations. Accordingly, this method measures the machining error and changes only one key parameter after the process. This study considered two cases. First, an airfoil in which the clamping force was corrected; the results were quite good with only one modification in the blade machining case. Second is an aspherical surface where tool path correction in the Z-axis was applied; the error was effectively compensated along the normal vector of the workpiece surface. The experimental results showed that the surface accuracy increased from 44.4 to 4.5 μm, and the error was reduced by 89.9%, confirming that the accuracy of the machine tool and process had achieved “evolution.” This technical study is expected to help improve the quality and productivity of manufacturing highly accurate curved surfaces.

This research analyses the viability of using cryogenic cooling combined with MQL (minimum quantity lubrication) lubrication, under CryoMQL technology, as a cutting fluid in the industrial environment to justify the increase in the environmental footprint generated by its use compared to MQL in stand-alone mode. For this analysis, a set of milling tests were carried out on carbon steel AISI 1045, which is one of the most commonly used materials in the business day-to-day. In this set of tests, the evolution of cutting edge wear and energy consumption of both technologies were recorded to check their tool life through technological and environmental analysis. Thus, we sought to discern whether the energy savings derived from the machining process make up for the greater environmental footprint initially generated by the use of CryoMQL technology itself. The results obtained show how the use of CryoMQL not only increased tool life, but also allowed an increase in productivity by increasing cutting speeds by 18%; in other words, thanks to this technology, a more technologically advanced and environmentally friendly process is obtained. By increasing tool life by 30%, a reduction in energy consumption is achieved together with cost savings, which implies that ECO2 machining has economic and ecological benefits.

Additive manufacturing through laser powder bed fusion (LPBF) has evolved into a key manufacturing process, but machining is still crucial to improve part quality. Holes in LPBF parts present poor accuracy, and helical milling with conventional endmills can be a suitable operation to finish holes in printed metal parts. Due to its superior properties, Inconel 718 is widely applied in aero-engine parts, requiring high reliability. However, Inconel 718 presents a tendency of machining hardening, being classified as a difficult-to-machine material. This work investigates the finishing through helical milling of holes in parts of Inconel 718 obtained through LPBF. LPBF parts of Inconel 718 were obtained with pre-holes and these were finished through helical milling. Holes of LPBF parts may present significant geometrical error. The results indicate that helical milling is suitable for improving the quality of LPBF holes. LPBF parts obtained with the laser scan angle of 67 $$^{\circ }$$ ∘ with thermal treatment presented higher grain refinement and precipitates, resulting in the highest cutting forces and roughness. Cutting force patterns presented a significant correlation with geometrical error variation. Process modeling highlighted the most influential LPBF and helical milling parameters on cutting forces and roughness. The axial and tangential feeds presented directly and inversely proportional effects on cutting forces, respecting the kinematics and undeformed chip volumes. Finally, bi-objective optimization was performed to guide the choice of the best conditions to achieve improved roughness and lowest cutting forces.

The MM Science Journal, published since 2008, is a world respected scientific journal. The journal, published in English, is double peer reviewed and competitive in distributing knowledge among domestic and international academics and professionals. Full texts are available on-line on the journal...