This article presents a division of methods to support mechanical weeding based on mechatronic control systems and estimates their effectiveness. The subject was undertaken due to the noticeable increase in interest in machine weeding methods, which is the result of the need for farmers to meet the growing awareness of customers focusing on healthy and high-quality products and the European Union policy promoting environmental protection programs, such as the European Green Deal and supporting commission priorities like the Mission Soil as a flagship initiative of the long-term vision for the EU’s rural areas. Mechanical weeding meets the stringent conditions set by organic farming, and automation favours the development of these methods. Based on sources in the literature, it has been shown that it is possible to increase the weeding speed by at least 1.6 times by using the tool position correction system for row crops. In the case of crops requiring weeding, and in the spaces between plants in a row, the use of specialised weeding machines allows for an increase in the weeding efficiency by up to 2.57 times compared to manual weeding. Each of the analysed methods used to support weeding are subject to a certain error due to the use of sources in the literature, including manufacturers’ materials; however, it shows an upward trend in the effectiveness of using mechatronic weeding support systems, which was part of the thesis. This article presents the division of these systems and analyses the specific market solutions of machines, which is its distinguishing feature.
Baler-wrappers are machines designed to produce high-quality forage, in accordance with the requirements of sustainable agriculture. Their complicated structure, and significant loads occurring during operation, prompted the creation of systems for controlling the machines’ processes and measuring the most important work parameters, in this work. The compaction control system is based on a signal from the force sensors. It allows for detection differences in the compression of the bale and additionally protects against overload. The method of measuring the swath size, with the use of a 3D camera, was presented. Scanning the surface and travelled distance allows for estimating the volume of the collected material—making it possible to create yield maps (precision farming). It is also used to vary the dosage of ensilage agents, that control the fodder formation process, in relation to the moisture and temperature of the material. The paper also deals with the issue of measuring the weight of the bales—securing the machine against overload and collecting data for planning the bales’ transport. The machine, equipped with the above-mentioned systems, allows for safer and more efficient work, and provides information about the state of the crop in relation to a geographical position, which allows for further inferences.
Agrotechnological procedures related to forest management, including planting, are burdensome and the energy expenditure of the people working is very high. Nowadays, planting is usually carried out manually, and sometimes with the use of planters coupled to universal tractors. Occasionally, planters mounted on high-power carriers are used, and usually the seedlings are removed from their cassettes and placed manually into the planter’s storage unit. In connection with the above, the prototype of a mobile automatic device for performing forest regeneration tasks and afforestation of post-agricultural and reclaimed areas (RoboFoR) was designed. The main task of this vehicle is planting forest tree seedlings with a covered root system, which are collected directly from their nursery cassettes. This study presents the structure, principle of operation and results of operational tests of the seedling storage and feeding unit. It was found that the unit achieved the expected work efficiency. However, imperfections in the system related to the non-centralized distribution of seedlings in containers and the high variability of biometric characteristics of the seedlings were also identified. A new solution for this unit was proposed, which will increase the reliability of collecting the seedlings. A new solution requires greater computational power of the control unit as well as equipping the sensor system with a technologically advanced root neck detection system. The new concept also assumes the possibility of independent movement of each gripper.