The development of optical interconnect techniques greatly expands the communication bandwidth and decreases the power consumption at the same time. It provides a prospective solution for both intra‐chip and inter‐chip links. Herein reported is an integrated wavelength‐division multiplexing (WDM)‐compatible multimode optical switching system‐on‐chip (SoC) for large‐capacity optical switching among processors. The interfaces for the input and output of the processor signals are electrical, and the on‐chip data transmission and switching process are optical. It includes silicon‐based microring optical modulator arrays, mode multiplexers/de‐multiplexers, optical switches, microring wavelength de‐multiplexers and germanium‐silicon high‐speed photodetectors. By introducing external multi‐wavelength laser sources, the SoC achieved the function of on‐chip WDM and mode‐division multiplexing (MDM) hybrid‐signal data transmission and switching on a standard silicon photonics platform. As a proof of concept, signals with a 25 Gbps data rate are implemented on each microring modulator of the fabricated SoC. We illustrated 25 × 3 × 2 Gbps on‐chip data throughput with two‐by‐two multimode switching functionality through implementing three wavelength‐channels and two mode‐channel hybrid‐multiplexed signals for each multimode transmission waveguide. The architecture of the SoC is flexible to scale, both for the number of supported processors and the data throughput. The demonstration paves the way to a large‐capacity multimode optical switching SoC.
The application of the inverse design method and free-form geometrical optimization in photonic devices endows them with highly tunable functionality and an ultra-compact footprint. In this paper, we implemented this platform to silicon photonic guided-mode manipulation and demonstrated a guided mode-based signal switching architecture. The passive signal switching mechanism is utilized so that no power consumption is needed for routing state maintenance. To solve the explosive increasing design cost in such mechanism when the switching scale is expanded, we illustrate that only a small number of mode switching devices need to be designed as the switching basis. In theory, arbitrary signal routing states can be constructed by cascading some selected basis. The required switching devices can be decreased from factorial N to N - 1 for the N channels switching. For proof of concept, we design and experimentally demonstrate the three-mode cases and the cascade method to combine any three mode-based switching devices. Experiments show that the insertion losses of TE0 - TE1 mode switching unit (U1), TE1 - TE2 mode switching units (U2), and TE0 - TE2 mode switching unit (U3) are less than 2.8 dB, 3.1 dB, and 2.3 dB, respectively. The demonstrated architecture has both arbitrary signal switching capability and ultra-compact footprint, which is promising in the application of mode-division multiplexing communication systems.
27 February 2024 in Journal of Lightwave Technology
Silicon waveguide bends are key components that affect the packing density and scalability of photonic integrated circuits. Traditional bend design methods rely on well-established functions such as Euler spirals or Bezier curves, which have limited parameter spaces, limiting the discovery of compact bends with higher performance. Here, we propose a general approach to waveguide bend design. For a given radius, our method uses cubic spline interpolation with an inverse design algorithm to obtain an optimal bend geometry to support a given number of modes. We refine the particle swarm optimization algorithm to reduce the need for parameter tuning and increase its ability to avoid local optima. As a result of these modifications, the design process becomes less complicated and more efficient. To demonstrate the effectiveness of the proposed method, we design and fabricate three waveguide bends supporting one, two, and three modes with radii of 2.5 μm, 4 μm, and 5 μm, respectively. The measured (simulated) insertion losses of the three bends are less than 0.012 (0.009) dB, 0.04 (0.028) dB and 0.059 (0.048) dB per 90°, respectively. The measured (simulated) crosstalk between the modes of the latter two bends is less than –23.6 (–36.1) dB and –19.7 (–26.5) dB per 90°, respectively. The proposed method provides an effective tool for designing compact multimode bends for future photonic integrated circuits.
The inverse-designed photonic device, with the characteristics of high performance and ultra-high compactness, is suitable for on-chip photonics applications. The gradient-based algorithms have high convergence efficiency. However, they depend on the continuous independent variable, so they cannot be directly applied to the pixel-based discrete search methods. In this paper, we propose a gradient-probability-driven discrete search (GPDS) algorithm for photonics inverse design. The algorithm establishes a connection between the gradient and the discrete value set by introducing the method of probability sampling. As an intrinsic discrete search algorithm in which the values of pixels are selected from a finite number of the discrete set, no additional discretization process is needed. Compared with the traditional brute-force search (BFS) method and traditional gradient method, the probability sampling process of our proposed GPDS algorithm can improve device performance efficiently and provide better stability to the initial states. We illustrate several component designs which are commonly used in the silicon photonics platform, and the results show that the algorithm can achieve high-performance structures within fewer iterations and has the ability of multi-objective optimization. With good flexibility and manufacturing-friendly geometry control, the algorithms are potential to be a powerful tool in solving multi-objective problems.