Rasha Hosny

Dr. Rasha Hosny

Egyptian Petroleum Research Institute, Cairo, Al Qāhirah, Egypt
orcid

Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2016 in Egyptian Journal of Petroleum
Verified
Journal Article
Open access
Rasha HosnyRasha Hosny
Rasha Hosny
MFM. Fathy
M. Fathy
MRM. Ramzi
M. Ramzi
TMTh. Abdel Moghny
Th. Abdel Moghny
SDS.E.M. Desouky
S.E.M. Desouky
SSS.A. Shama
S.A. Shama
Treatment of the oily produced water (OPW) before injection into oil reservoirs is necessary to reduce formation damage. This can be done using chemo-physical process to minimize the oil droplets in water. In this respect, this work aims to extract natural polymer (chitosan) from shrimp shells and mix it with coagulants (chitosan/carboxy methyl cellulose and chitosan/aluminum sulfate) to adsorb oil from OPW. Adsorption experiments were carried out in batch mode firstly to choose the best coagulants in water treatment, also to investigate the effects of pH on the adsorption uptake, adsorbent dosage, coagulant mixture doses and contact time. It was found that the oil removal by chitosan reached 96.35% and 59% at pH=4 and pH=9, respectively. The ability of chitosan to remove oil was increased after adding different coagulants CMC/or aluminum sulfate at average mixing time between 30 and 60min. It was also found that the highest removal efficiency of chitosan/CMC is 99% at (90% chitosan: 10% CMC) and chitosan/Al2(SO4)3 is 85% at (80% chitosan: 20% Al2(SO4)3). The SEM photographs of chitosan, chitosan/CMC and chitosan/Al2(SO4)3 mixture as oil removal showed that chitosan/Al2(SO4)3 lies between chitosan alone and chitosan/CMC mixture. Generally chitosan/CMC characterized significantly by its high ability to adsorb petroleum oil and suspended solids from OPW, additionally, reduces the economic cost of water treatment

28 November 2023 in ACS Omega
Verified
Journal Article
Open access
Rasha HosnyRasha Hosny
Rasha Hosny
AZAhmed Zahran
Ahmed Zahran
AAAhmed Abotaleb
Ahmed Abotaleb
MRMahmoud Ramzi
Mahmoud Ramzi
MMMahmoud F. Mubarak
Mahmoud F. Mubarak
MFModather Farouk
Modather Farouk
Oil and gas are only two industries that could change because of nanotechnology, a rapidly growing field. The chemical-enhanced oil recovery (CEOR) method uses chemicals to accelerate oil flow from reservoirs. New and enhanced CEOR compounds that are more efficient and eco-friendly can be created using nanotechnology. One of the main research areas is creating novel nanomaterials that can transfer EOR chemicals to the reservoir more effectively. It was creating nanoparticles that can be used to change the viscosity and surface tension of reservoir fluids and constructing nanoparticles that can be utilized to improve the efficiency of the EOR compounds that are already in use. The assessment also identifies some difficulties that must be overcome before nanotechnology-based EOR can become widely used in industry. These difficulties include the requirement for creating mass-producible, cost-effective nanomaterials. There is a need to create strategies for supplying nanomaterials to the reservoir without endangering the formation of the reservoir. The requirement is to evaluate the environmental effects of CEOR compounds based on nanotechnology. The advantages of nanotechnology-based EOR are substantial despite the difficulties. Nanotechnology could make oil production more effective, profitable, and less environmentally harmful. An extensive overview of the most current advancements in nanotechnology-based EOR is provided in this paper. It is a useful resource for researchers and business people interested in this area. This review's analysis of current advancements in nanotechnology-based EOR shows that this area is attracting more and more attention. There have been a lot more publications on this subject in recent years, and a lot of research is being done on many facets of nanotechnology-based EOR. The scientometric investigation discovered serious inadequacies in earlier studies on adopting EOR and its potential benefits for a sustainable future. Research partnerships, joint ventures, and cutting-edge technology that consider assessing current changes and advances in oil output can all benefit from the results of our scientometric analysis.

1 October 2024 in Discover Applied Sciences
Verified
Journal Article
Open access
PDF file
MFModather Farouk
Modather Farouk
MMMahmoud F. Mubarak
Mahmoud F. Mubarak
AAAlaa Al-sirhani
Alaa Al-sirhani
Rasha HosnyRasha Hosny
Rasha Hosny
Barium sulfate (BaSO4) scale formation in oilfield operations is a significant problem that leads to severe operational challenges, including reduced production efficiency and increased maintenance costs. Understanding the factors that influence BaSO4 scale formation, such as injection rate and temperature, is crucial for developing effective mitigation strategies. In this study, we systematically investigated the effects of injection rate and temperature on BaSO4 scale formation using a series of controlled laboratory experiments. The injection rates varied between 1 and 5 mL/min and temperatures between 25 and 75 °C, simulating realistic field conditions. Our findings indicate that higher injection rates and elevated temperatures significantly increase the amount of BaSO4 scale formed. Specifically, the scale formation increased from 15.2 mg/L at 1 mL/min and 25 °C to 22.3 mg/L at 5 mL/min and the same temperature. Similarly, at a constant injection rate of 3 mL/min, the scale formation increased from 18.1 mg/L at 25 °C to 26.5 mg/L at 75 °C. The study employed Scanning Electron Microscopy (SEM) and X-ray Diffraction (XRD) to analyze the crystal morphology and structure of the formed scales. SEM images revealed a transition from dendritic structures at lower temperatures and slower injection rates to spherical crystals at higher temperatures and faster injection rates. XRD patterns indicated variations in crystallinity and phase purity corresponding to the experimental conditions. Our results align with previous studies that report increased nucleation rates and reduced solubility of BaSO4 at higher temperatures and injection rates. These findings highlight the critical role of controlling operational parameters to mitigate scale formation in oil and gas operations. By optimizing injection rates and temperatures, it is possible to reduce scale deposition, thereby improving production efficiency and reducing maintenance costs. This study provides valuable insights for the development of scale management strategies and underscores the importance of a comprehensive understanding of the physicochemical factors affecting BaSO4 scale formation.

13 August 2021 in Polymers
Verified
Journal Article
Open access
PDF file
MMMahmoud F. Mubarak
Mahmoud F. Mubarak
AAahmed almorsy
ahmed almorsy
Rasha HosnyRasha Hosny
Rasha Hosny
IAInas Ahmed
Inas Ahmed
HAHanan A. Ahmed
Hanan A. Ahmed
ASAbeer El Shahawy
Abeer El Shahawy
A novel chitosan/grafted halloysitenanotubes@Znγmagnetite quaternary nanocomposite (Ch/g-HNTs@ZnγM) was fabricated using the chemical co-precipitation method to remove the ions of Cr (III), Fe (III), and Mn (II) from wastewater. The characteristics of the synthesized Ch/g-HNTs@ZnγM quaternary nanocomposite were investigated using FTIR, SEM, XRD, GPC, TGA, TEM, and surface zeta potential. The characterization analysis proved that the mentioned nanocomposite structure contains multiple functional groups with variable efficiencies. Additionally, they proved the existence of magnetic iron in the nanocomposite internal structure with the clarity of presentation of gaps and holes of high electron density on its surface. The results showed that the pH and time to reach an equilibrium system for all the studied metal ions were obtained at 9.0 and 60 min, respectively. The synthesized Ch/g-HNTs@ZnγM nanocomposite exhibited maximum adsorption removal of 95.2%, 99.06%, and 87.1% for Cr (III), Fe (III), and Mn (II) ions, respectively. The pseudo-second-order kinetic model and, for isotherm, the Langmuir model were best fitted with the experimental data. The thermodynamic parameters indicated the exothermic and spontaneous nature of the adsorption reaction as proven by the ΔH° and ΔG° values. Additionally, chemical adsorption by the coordination bond is supposed as the main mechanism of adsorption of the mentioned metal ions on the nanocomposite. Finally, Ch/g-HNTs@ZnγM displays prospected advantages, such as a low-expense adsorbent, high efficiency and availability, and an eco-friendly source, that will reduce the environmental load via an environmentally friendly method.

12 February 2016 in Water Science & Technology
Verified
Journal Article
Closed access
PDF file
MEM. El-Sayed
M. El-Sayed
MRM. Ramzi
M. Ramzi
Rasha HosnyRasha Hosny
Rasha Hosny
MFM. Fathy
M. Fathy
TMTh. Abdel Moghny
Th. Abdel Moghny
A novel amorphous carbon thin film (ACTF) was prepared by hydrolyze wood sawdust and delignificate the residue to obtain cellulose mass that subjected to react with cobalt silicate nanoparticle as a catalyst under the influence of sudden concentrated sulfuric acid addition at 23 °C. The novel ACTF was obtained in the form of thin films like graphene sheets having winding surface. The prepared ACTF was characterized by fourier-transform infrared spectrometer, TEM, and BET. The adsorption capacity of ACTF to remove oil from synthetic produced water was evaluated using the incorporation of Thomas and Yoon–Nelson models. The performance study is described through the breakthrough curves concept under relevant operating conditions such as column bed heights (3.8, 5 and 11 mm) and flow rate (0.5, 1 and 1.5 ml.min−1). It was found that the oil uptake mechanism is favoring higher bed height. Also, the highest bed capacity of 700 mg oil/g ACTF was achieved at 5 mm bed height, and 0.5 ml.min−1 flow rate. The results of breakthrough curve for oil adsorption was best described using the Yoon–Nelson model. Finally, the results illustrate that ACTF could be utilized effectively for oil removal from synthetic produced water in a fixed-bed column system.

1 October 2019 in Journal of Petroleum Science and Engineering
Verified
Journal Article
Closed access
AEA.N. El-Hoshoudy
A.N. El-Hoshoudy
Rasha HosnyRasha Hosny
Rasha Hosny
MFM. Fathy
M. Fathy
OAO.H. Abdelraheem
O.H. Abdelraheem
SGS. Gomaa
S. Gomaa
SDS.M. Desouky
S.M. Desouky