This study examines the behaviour of square footings located on unreinforced, single-, and double-layer geocell-reinforced sand slopes through a series of reduced-scale model tests. Contributing factors such as the distance between the footing and the edge of the slope, depth of burial of the first geocell layer, vertical span between successive layers of the geocell, length and width of the geocell mattresses, and the number of geocell layers were considered, and their effects are discussed in detail. The results indicate that geocell reinforcement plays a more effective role as the distance between the footing and the edge of the slope decreases. The optimum depth of placement of the first geocell layer for both single- and double-layer reinforced slopes was determined, and was found to be independent of the length of the geocell. In addition, the performance of the footing continued to decrease with greater vertical distance between the top and lower geocell layers. Only a marginal improvement in the behavior of the tested models was observed for a range of widths of the geocell.
In reality, slopes rarely follow the plain strain conditions and to have a precise estimation of their stability, a 3D slope stability analysis should be conducted instead of resorting to simplistic, prevalent and more conservative 2D slope stability analysis. This is especially true for geocell-reinforced slopes for which the honeycomb structure of the geocells makes a 3D slope stability analysis inevitable. However, there has been no attempt to cover this issue so far. In this study, three-dimensional strength reduction method is employed to investigate the stability of slopes reinforced with geocells. Typical locally loaded slopes reinforced in the body with a single and three layers of geocell were modelled taking into account geocells having contact with their infill and surrounding soils. Then, effects of such contributing factors such as depth of the geocell layer placement, geocell pocket size, width of geocell layer, length of the geocell layer and slope inclination angle on the factor of safety and shape of the slip surface of slopes reinforced with a single geocell layer were studied thoroughly. Furthermore, considering three different geocell layer arrangements over the slope height, their superiority over each other in terms of slope stability was investigated.
1 April 2023 in International Journal of Geomechanics
The philosophy of designing piles as settlement-reducing elements causes the number of piles required beneath a wide foundation to be significantly reduced compared with conventional design methods. In this study, the behavior of deep soil mixing (DSM) columns used as settlement-reducing elements under the foundation of circular liquid reservoir tanks with large diameters (more than 50 m) in sandy soils of the Persian Gulf coast under axial loading has been investigated using a parametric-based finite element method (FEM) analysis in a Midas GTS NX environment. The parametric study includes 1 case with no improvement and 48 cases of improved soil with various configurations. The loading conditions are similar to those of a standard liquid tank with a large diameter. Variables such as area improvement ratios, DSM column floating ratios, and cushion layer thickness have been investigated. It has been found that increasing the thickness of the cushion layer, the floating ratio, and the area improvement ratio each contributes a certain amount to the overall reduction of the total and differential settlement values. However, under certain conditions, some factors, such as the area improvement ratio, have been found to have a reduced improvement effect. These factors, and their influence on the whole system, have been thoroughly investigated numerically in the parametric study, and in the two validation cases, the results of the FEM analysis have been compared with measured data from the field and small-scale tests. The results of gathered data from field tests and parametric studies have also been compared with empirical formulas provided by other researchers.
4 May 2021 in International Journal of Geosynthetics and Ground Engineering