Yupeng Shen

Dr. Yupeng Shen


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 May 2023 in Processes
Verified
Journal Article
Open access
PDF file
BZBao Zhang
Bao Zhang
WNWei Ni
Wei Ni
XHXiuqiang Hao
Xiuqiang Hao
HLHuiqiang Li
Huiqiang Li
YSYupeng Shen
Yupeng Shen
The western mining areas of China, which are rich in coal resources, lack water resources. Large-scale and high-intensity coal mining in China’s western mining areas has led to the loss of groundwater resources. Underground reservoirs in coal mines are an effective means of achieving the protection and utilization of water resources in these western mining areas. One of the important standards for the safety of an underground reservoir in a coal mine involves checking whether the development of cracks in the coal pillar dam body, under the dual stress conditions of overlying strata and lateral water pressure, passes through the coal pillar dam body or its top and bottom plates, forming a seepage channel for mine water. This article focuses on the safety issues associated with coal pillar dams in the underground reservoirs of coal mines. From the perspectives of overlying rock pressure and lateral water pressure on coal pillar dams, mechanical models, numerical calculations, and similar simulation methods were used to analyze macroscopic deformation, displacement, and crack development in coal pillar dams of different sizes under vertical and horizontal stress and to study the optimum width of coal pillar dams. Our research results indicated that the optimal width of the coal pillar dam body can be determined via numerical simulation based on the deformation and stress state in a given dam. When the horizontal stress increases, the smaller the coal pillar width is, the greater the increment of syy and sxx becomes, and the more likely the coal pillar is to be damaged. Similar simulations showed that the smaller the size of the coal pillar is, the easier it is to generate stress concentration, and the more likely this stress is to “eat away” the coal pillar dam body. There is a certain relationship between the size of the coal pillar dam and the range of crack development. The larger the coal pillar size is, the less obvious the stress concentration effect becomes, and the less likely the crack is to penetrate the internal and external parts of the reservoir. Taking the Shangwan mine as an example, it was determined that the maximum water head height that could be carried by the 15-m coal pillar dam body was 50 m. A comprehensive study of the development and evolution of cracks in the coal pillar dam of an underground reservoir in a coal mine, and the characteristics of sliding instability, was conducted to determine the optimal size and maximum water storage height of a coal pillar that does not penetrate the inner and outer parts of the reservoir. The development and evolution of cracks are important factors affecting the stability of coal pillar dams. This study can expand and improve the basic theory of underground reservoirs in coal mines, provide a scientific basis for determining the optimum size of a coal pillar dam, guarantee the long-term safe and stable operation of the coal pillar dams of underground reservoirs in coal mines, and continuously save mine water resources and increase the economic benefits of coal mines. These implications are of great significance for the long-term stable operation of underground reservoirs in coal mines under similar geological conditions.

12 November 2024 in Frontiers in Earth Science
Verified
Journal Article
Open access
PDF file
JZJimiao Zhang
Jimiao Zhang
BZBao Zhang
Bao Zhang
YSYupeng Shen
Yupeng Shen
TYTuo Yang
Tuo Yang
In deep underground engineering, it is inevitable that portions of the rock mass will be subjected to the erosion and chemical corrosion of infiltrating water. A comprehensive study of the physical, mechanical, and energetic properties of rocks after hydrochemical corrosion is crucial for ensuring the stability of the rock mass. The novelty of this research lies in the detailed investigation of the macroscopic and microscopic morphologies of rocks exposed to various corrosive solutions, as well as the changes in various physical and mechanical parameters. Utilizing the weighting method, a scientific comprehensive evaluation system for deep rocks after hydrochemical corrosion has been established. The results indicate a pronounced sensitivity of the macroscopic and microscopic morphologies to pH values. The longitudinal wave velocity of the corroded rock decreases obviously, with the maximum decrease being 13.46%. As the pH value decreases (from 7 to 3), the compressive strength, elastic modulus, cohesion, and internal friction angle of the rocks all decrease significantly. The acidity of the solution significantly aects the changes in the three types of strain energy of the rocks, with higher acidity leading to weaker energy storage capability. Among the factors influencing the characteristics of strain energy variation in rocks, confining pressure has a higher priority than pH value. This study precisely evaluates the impact of hydrochemical corrosion on rock damage using a percentage-based scoring system, and found that granite’s score dropped from 81 to 16. The research findings provide valuable insights for the evaluation of rock mass stability under hydrochemical corrosion conditions.

19 March 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
YSYupeng Shen
Yupeng Shen
TYtuo yang
tuo yang
JLJianzhuang Liu
Jianzhuang Liu
YLYang Li
Yang Li
JLJianqiao Luo
Jianqiao Luo
XZXiaonan Zhang
Xiaonan Zhang
The work examined how the spatiotemporal evolution of the coal-rock interface morphology affected the top coal caving ratio. The geological conditions of the 3307 fully mechanized caving face at Tang’an Coal Mine served as the research context. PFC2D simulations were conducted to analyze the spatiotemporal evolution of coal-rock interface morphology during mining advancement. Simulations covered the caving intervals of 0.8, 1.6, and 2.4 m, with a mining height of 3 m and the top coal thickness of 3 m at a mining-to-caving ratio of 1:1. A quantitative relationship was established between the initial and final caving boundaries and coal-rock interface morphology. This revealed the intrinsic connections between the morphology, coal-rock movement, and the distribution of residual coal in the goaf. The influence of differences in coal-rock interface morphology on the top coal caving ratio was determined. The dynamic changes in the initial caving boundary (θ1) occurred over time and space for caving intervals of 0.8, 1.6, and 2.4 m at a mining-to-caving ratio of 1:1. The initial caving boundary (θ1) was categorized into the types AI ~ AII, BI ~ BII, and CI ~ CII based on its differences. The initial caving boundary (θ1) variation pattern determined the final caving boundary (θ2) and corresponding coal-rock interface morphology. Initial caving boundary angle θ1 for types I and II decreased when the coal caving interval increased. For the same interval, initial boundary θ1 for types I and II followed the pattern: θI-1 > θII-1. The corresponding change pattern for final boundary θ2 was as follows. When θ1 > 90°, θ1 ≈ θ2; when θ1 < 90°, θ1 < θ2. For initial boundary θ1 > 90° in AI, AII, and BI, N1 ∥ N2, and the morphological differences between types AI and AII were minimal. Morphological changes were gradual, which resulted in minor fluctuations in the top coal caving volume. For initial boundary θ1 < 90° in BII, CI, and CII, θ1 < θ2. The difference between types I-II of BI ~ BII and CI ~ CII became more pronounced as the interval length increased. The difference between the peak and trough corresponding to types I ~ II increased. The sinusoidal periodic change pattern in top coal caving volume became more evident, which decreased the top coal recovery rate. The minimal morphological differences and gentle spatiotemporal distribution of type-AI and -AII coal-rock interfaces offered new insights for intelligent coal caving control and applications in this mine or similar mines.