Ahmed Montaser

Prof. Ahmed Montaser

orcid

Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 February 2018 in IEEE Access
Verified
Journal Article
Open access
KMKorany R. Mahmoud
Korany R. Mahmoud
AMAhmed Montaser
Ahmed Montaser
In this paper, the performance of tri-band multi-polarized adaptive array antenna for 5G mobile base station is introduced adopting the polarization and directivity control. First, the design of multi-band circularly polarized antenna element at 28/38/48 GHz is presented. The measured results show that the designed antenna element has a reflection coefficient of less than -20 dB in the assigned frequency bands of 28/38/48 GHz with a realized antenna gain of 7.82 dB, 8.39 dB, and 7.73 dB, respectively. Based on the designed antenna element, a 32-element are distributed in an octagonal prism configuration is presented as possible candidates for the future 5G mmWave cellular networks. The antenna array performance is studied in terms of gain, radiation efficiency, return loss, and axial ratio for different scenarios, in addition, the metrics of total scan pattern and coverage efficiency are investigated. To optimize the antenna parameters and synthesizing multi-beam patterns, a modified version of hybrid gravitational search algorithm and particle swarm optimization algorithm is introduced. This enhancement has improved the global search ability and accelerates the convergence capability. The proposed array antenna achieved good S 11 <; -20 dB with high isolation between the array elements. Besides, an acceptable realized gain of 16.85 dB on average with a radiation efficiency of more than 82 % is obtained in the entire operation bands.

16 April 2018 in IET Microwaves, Antennas & Propagation
Verified
Journal Article
Open access
PDF file
KMKorany R. Mahmoud
Korany R. Mahmoud
AMAhmed Montaser
Ahmed Montaser
In this study, a multi‐polarised millimetre‐wave (mm‐Wave) base station operating at 28/38 GHz is introduced for future fifth generation (5G) mobile communication networks. The proposed station employs 32‐element array antenna distributed in upside conical frustum configuration (UCFC) to synthesise multi‐beam patterns adopting directivity and polarisation control. First, the design of dual‐band circularly polarised antenna element at 28/38 GHz is discussed. The measured results show that the designed antenna element has a reflection coefficient less than −23 dB with a realised antenna gain of 8 dBi, on average, in the assigned frequency bands. Based on the designed antenna element, the antenna array performance is studied in terms of gain, radiation efficiency, reflection coefficient, and coverage efficiency. The results are compared with those obtained from 32‐element structured in an octagonal prism configuration (OPC). For antenna design parameters and multi‐beam pattern synthesis, a modified version of hybrid gravitational search algorithm and particle swarm optimisation is proposed. It is found that, the introduced UCFC outperformed the OPC by 19.8%. Moreover, distributing the antenna array in UCFC improved the convergence by 21.7% compared to OPC.

26 October 2021 in IEEE Access
Verified
Journal Article
Open access
AMAhmed Montaser
Ahmed Montaser
KMKorany R. Mahmoud
Korany R. Mahmoud
In this study, a deep neural network (DNN) is implemented to soft computation of the dual-band circularly polarized bone-shaped patch antenna (BSPA) at 28 GHz and 38 GHz for 5G applications. Via a simulated database of 150 BSPAs, a DNN model is constructed on a 5-layer system using an adaptive learning rate algorithm. The framework and hyper-parameters of the DNN model are optimized in the training phase of a hybrid algorithm combining strengths of both particle swarm optimization (PSO) and a modified version of the gravitational search algorithm (MGSA-PSO). To generate the database for training and testing the model, 150 BSPAs with different geometrical are simulated in terms of the resonant frequency using a precise electromagnetic analysis platform. A fabricated BSPA operating at 28 GHz and 38 GHz is used to test and verify the DNN model. Then, the application of DNN with back-propagation algorithm and weighted MGSA-PSO algorithm is used for beam-steering the main beam pattern of the designed uniform circular antenna array with side-lobe level <= -30 dB by estimating the appropriate feeding phases of the 16 elements. Several illustrative examples are placed to beam-steer the pattern in the desired direction to check the validity of the technique.

12 December 2017 in IET Microwaves, Antennas & Propagation
Verified
Journal Article
Open access
PDF file
KMKorany R. Mahmoud
Korany R. Mahmoud
AMAhmed Montaser
Ahmed Montaser
Here, a new design of phased‐array antenna for future fifth‐generation mobile phone applications is presented. The proposed phased array consists of 12 dual‐band circularly polarised antenna elements at 28/38 GHz used to form a linear array in the edges region (top‐side, right, and left sides) on a mobile phone circuit board. The measured and simulated results show that the designed antenna element has a reflection coefficient less than −15 dB in the assigned frequency bands of 28/38 GHz with a realised antenna gain of 7.68 and 7.73 dB, respectively. Furthermore, the performance of the array antenna package in the vicinity of user's head–hand has been investigated in this study at different scenarios. The designed array antenna achieved good matching impedance with high isolation between the array elements. Moreover, an acceptable realised gain of 16.85 dB on average with an axial ratio <3 dB is obtained in the entire operation bands. Lastly, the metrics of total scan pattern, coverage efficiency, and user shadowing are investigated. It is found that the proposed phased‐array antenna has good 3D beam‐steering characteristics, which makes it suitable for millimetre‐wave 5G mobile applications.

1 September 2022 in IEEE Access
Verified
Journal Article
Open access
KMKorany R. Mahmoud
Korany R. Mahmoud
AMAhmed Montaser
Ahmed Montaser
Hyperthermia therapy has recently become one of the primary treatment principles due to its prominence and success in curing deep-rooted malignancies, especially for breast tumors. Therefore, a proposed multi-resonance applicator (MRA) was designed and investigated in this study and compared with the performance of a single resonance applicator (SRA). The MRA applicator includes a set of 35 antenna elements operating simultaneously in different frequency bands. This is accomplished by applying a modified version of the gravitational search algorithm hybridized with particle swarm optimization to design the antenna element and focusing the heat on the tumor. Machine learning was used to build antenna elements operating in different frequency bands. Several scenarios considering realistic thermal and dielectric breast properties with a single tumor of different volumes and positions are addressed to evaluate the applicator’s performance and capability. The results showed the capability of the proposed MRA applicator to use a microwave power of 60 watts to elevate the temperature of the tumor to over 42.5° C with better performance indicators than SRA. The suggested methodology of using MRA can be considered to treat successfully other malignancies in different organs, such as brain, liver and larynx tumors.

7 November 2022 in IEEE Access
Verified
Journal Article
Open access
AMAhmed Montaser
Ahmed Montaser
KMKorany R. Mahmoud
Korany R. Mahmoud
Work on identifying the various techniques for 6G wireless networks has already begun as the present specification for 5G networks nears conclusion. Reconfigurable Intelligent Surfaces (RISs) are one of these potentially useful technologies for 6G service providers. They provide unparalleled levels of freedom in terms of wireless channel engineering, allowing the system to change the channel’s properties whenever and however it chooses. Nonetheless, such qualities need a thorough understanding of the reaction of the related meta-surface under all conceivable operational situations. Analytical models and complete wave simulations may both be used to gain a better knowledge of the radiation pattern features, although both have inaccuracies under specific situations and are exceedingly computationally intensive. As a result, in this study, we offer a unique neural network-based technique for description of the meta-surfaces response that is both rapid and accurate. We look at a variety of scenarios and show how the proposed methodology can be used in them. In particular, we show that our technique is capable of learning and predicting the parameters driving the reflected wave radiation pattern with the accuracy of a complete wave simulation (98.8%–99.8%) while using just a fraction of the time and computer complexity of an analytical simulation. The above finding and approach will be particularly useful in the design, defect tolerance, and servicing of the hundreds of RISs which will be installed in the 6G distributed system.