Masks are essential and effective small protective devices used to protect the general public against infections such as COVID-19. However, available systematic reviews and summaries on the filtration performance of masks are lacking. Therefore, in order to investigate the filtration performance of masks, filtration mechanisms, mask characteristics, and the relationships between influencing factors and protective performance were first analyzed through mask evaluations. The summary of filtration mechanisms and mask characteristics provides readers with a clear and easy-to-understand theoretical cognition. Then, a detailed analysis of influencing factors and the relationships between the influencing factors and filtration performance is presented in. The influence of the aerosol size and type on filtration performance is nonlinear and nonconstant, and filtration efficiency decreases with an increase in the gas flow rate; moreover, fitness plays a decisive role in the protective effects of masks. It is recommended that the public should wear surgical masks to prevent COVID-19 infection in low-risk and non-densely populated areas. Future research should focus on fitness tests, and the formulation of standards should also be accelerated. This paper provides a systematic review that will be helpful for the design of masks and public health in the future.

The development of stable and efficient electrocatalysts for oxygen evolution reaction is of great significance for electro-catalytic water splitting. Bimetallic layered double hydroxides (LDHs) are promising OER catalysts, in which NiCu LDH has excellent stability compared with the most robust NiFe LDH, but the OER activity is not satisfactory. Here, we designed a NiCu LDH heterostructure electrocatalyst (Cu/NiCu LDH) modified by Cu nanoparticles which has excellent activity and stability. The Cu/NiCu LDH electrocatalyst only needs a low over-potential of 206 mV and a low Tafel slope of 86.9 mV dec⁻¹ at a current density of 10 mA cm⁻² and maintains for 70 h at a high current density of 100 mA cm^–2 in 1M KOH. X-ray photoelectron spectroscopy (XPS) showed that there was a strong electronic interaction between Cu nanoparticles and NiCu LDH. Density functional theory (DFT) calculations show that the electronic coupling between Cu nanoparticles and NiCu LDH can effectively improve the intrinsic OER activity by optimizing the conductivity and the adsorption energy of oxygen-containing intermediates.

The primary purpose of this paper is to investigate energy regeneration and conversion technologies based on mechanical–electric–hydraulic hybrid energy storage systems in vehicles. There has been renewed interest in hydraulic storage systems since evidence has been presented that shows that they have the distinct advantages of high energy output and energy recuperation compared to electrical energy recovery systems, which are widely applied in electric vehicles; however, they are known to be high-cost, with a complicated structure and not zero carbon. In this paper, we first review recent research on hydraulic energy regeneration and conversion technologies. Secondly, as the main part of this paper, the latest technological progress and breakthroughs of the mechanical–electric–hydraulic hybrid energy storage systems in vehicles—which are divided into four categories: passenger, minibus and bus, commercial vehicle and special vehicle—are analyzed and discussed in depth. In addition, the current research status of energy management techniques is presented and summarized. Finally, prospects and challenges are suggested and explained. It is evident from the literature review that the mechanical–electric–hydraulic hybrid systems perform excellently in vehicles. Clearly, this review will be helpful to understand, explore and define the hydraulic vehicle of the future concerning energy optimization and environmental friendliness.

The contaminant-insensitive sublimator (CIS) is a novel water sublimator in development, which uses two porous substrates to separate the sublimation point from the pressure-control point and provide long-life effective cooling for spacecraft. Many essential studies need to be carried out in the field. To overcome the reliability issues such as ice breakthrough caused by large temperature or pressure differences, the CIS development unit model, the mathematical models of heat and mass transfer and the evaluation coefficient have been established. Numerical investigations have been implemented aiming at the impacts of physical properties of porous substrate, physical properties of working fluid, orifice layouts and orifice-structure parameters on the characteristics of flow field and temperature field. The numerical investigation shows some valuable conclusion, such as the temperature uniformity coefficient at the bottom surface of the large pore substrate is 0.997669 and the pressure uniformity coefficient at the same surface is 0.85361267. These numerical results can provide structure and data reference for the CIS design of lunar probe or spacesuit.

A proper operating temperature range and an acceptable temperature uniformity are extremely essential for the efficient and safe operation of the Li-ion battery array, which is an important power source of space stations. The single-phase fluid loop is one of the effective approaches for the thermal management of the battery. Due to the limitation that once the structure of the cold plate (CP) is determined, it is difficult to adjust the cooling ability of different locations of the CP dynamically, this may lead to a large temperature difference of the battery array that is attached to the different locations of the CP. This paper presents a micro-channel CP integrated with a thermoelectric heat pump (THP) in order to achieve the dynamic adjustment of the cooling ability of different locations of the CP. The THP functions to balance the heat transfer within the CP, which transports the heat of the high-temperature region to the low-temperature region by regulating the THP current, where a better temperature uniformity of the CP can be achieved. A lumped-parameter model for the proposed system is established to examine the effects of the thermal load and electric current on the dynamic thermal characteristics. In addition, three different thermal control algorithms (basic PID, fuzzy-PID, and BP-PID) are explored to examine the CP’s temperature uniformity performance by adapting the electric current of the THP. The results demonstrate that the temperature difference of the focused CP can be declined by 1.8 K with the assistance of the THP. The proposed fuzzy-PID controller and BP-PID controller present much better performances than that provided by the basic PID controller in terms of overshoot, response time, and steady state error. Such an innovative arrangement will enhance the CP’s dynamic cooling ability distribution effectively, and thus improve the temperature uniformity and operating reliability of the Li-ion space battery array further.

The Beijing-Tianjin-Hebei region has abundant biomass resources, which are difficult to collect and thus are underutilized. However, the potential estimation of biomass energy can result in a comprehensive understanding of bioenergy resources in order to establish a technology roadmap for the region’s bioenergy development. Therefore, it is essential to estimate the potential of Beijing-Tianjin-Hebei biomass resources and bioenergy utilization. In this paper, the amount of main biomass resources for possible energy use and bioenergy utilization are calculated based on a statistical data estimation method for crop residues; human, poultry, and livestock manure; and municipal solid wastes. On the basis of biomass resources and bioenergy utilization potential, the technology roadmap is established. The results show that the amount for available biomass energy use is unevenly distributed in the Beijing-Tianjin-Hebei region, and the largest amount of resources is crop residues (36.52 million tons or 18.26 million tons coal equivalent). The biogas from human, poultry, and livestock manure and densified solids from crop residue technology roadmap is suitable for the Beijing-Tianjin-Hebei region.