Potassium is a macro element in plants that is typically supplied to crops in excess throughout the season to avoid a deficit leading to reduced crop yield. Transpiration rate is a momentary physiological attribute that is indicative of soil water content, the plant’s water requirements, and abiotic stress factors. In this study, two systems were combined to create a hyperspectral–physiological plant database for classification of potassium treatments (low, medium, and high) and estimation of momentary transpiration rate from hyperspectral images. PlantArray 3.0 was used to control fertigation, log ambient conditions, and calculate transpiration rates. In addition, a semi-automated platform carrying a hyperspectral camera was triggered every hour to capture images of a large array of pepper plants. The combined attributes and spectral information on an hourly basis were used to classify plants into their given potassium treatments (average accuracy = 80%) and to estimate transpiration rate (RMSE = 0.025 g/min, R2 = 0.75) using the advanced ensemble learning algorithm XGBoost (extreme gradient boosting algorithm). Although potassium has no direct spectral absorption features, the classification results demonstrated the ability to label plants according to potassium treatments based on a remotely measured hyperspectral signal. The ability to estimate transpiration rates for different potassium applications using spectral information can aid in irrigation management and crop yield optimization. These combined results are important for decision-making during the growing season, and particularly at the early stages when potassium levels can still be corrected to prevent yield loss.
The moving‐boundary approach, which has been successfully used to model stable and unstable 1‐D flow in initially dry soils of various contact angles (Brindt & Wallach, 2017 https://doi.org/10.1002/2016WR019252), was extended here for 2‐D flow. The wetting front is the plume perimeter that is partly formed by the capillary driving force, the remaining part by the combined capillary and gravity driving forces. The moving‐boundary approach overcomes the limitation of the Richards equation for describing gravity‐driven unstable flow with nonmonotonic water‐content distribution. According to this approach, the 2‐D flow domain is divided into two subdomains with a sharp change in fluid saturation between them—the wetting front (moving boundary). The 2‐D Richards equation was solved for the subdomain behind the wetting front for a given flux boundary condition at the soil surface, while the location of the other boundary, for which a no‐flux condition is imposed, was part of the solution. The moving‐boundary solution was used after verification to demonstrate the synergistic effect of contact angle and incoming flux on flow stability and its associated plume shapes. The contact angle that hinders spontaneous invasion of the dry pores decreases the water‐entry capillary pressure, ψwe, while the flux‐dependent dynamic water‐entry value, ψwed, is even lower, both inducing water accumulation behind the wetting front (saturation overshoot). This innovative physically based model for the 2‐D unsaturated flow problem for an initially dry soil of zero and nonzero contact angle using the moving‐boundary approach fulfills several criteria raised by researchers to adequately describe gravity‐driven unstable flow.
A novel hyperspectral-physiological system that monitors plants dynamic response to abiotic alterations was developed. The system is a sensor-to-plant platform which can determine the optimal time of day during which physiological traits can be successfully identified via spectral means. The directly measured traits include momentary and daily transpiration rates throughout the daytime and daily and periodical plant weight loss and gain. The system monitored and evaluated pepper plants response to varying levels of potassium fertilization. Significant momentary transpiration rates differences were found between the treatments during 07:00–10:00 and 14:00–17:00. The simultaneous frequently measured high-resolution spectral data provided the means to correlate the two measured data sets. Significant correlation coefficients between the spectra and momentary transpiration rates resulted with a selection of three bands (ρ523, ρ697 and ρ818nm) that were used to capture transpiration rate differences using a normalized difference formula during the morning, noon and the afternoon. These differences also indicated that the best results are not always obtained when spectral (remote or proximal) measurements are typically preformed around noon (when solar illumination is the highest). Valuable information can be obtained when the spectral measurements are timed according to the plants’ dynamic physiological status throughout the day, which may vary among plant species and should be considered when planning remote sensing data acquisition.