Up to half of the global fruit and vegetable production is wasted or lost along the supply chain, causing wastage of resources and economic losses. Ambient parameters strongly influence quality and shelf life of fresh fruit and vegetables. Monitoring these parameters by using Internet of Things (IoT)-enabled sensor and communication technology in supply chains can help to optimize product qualities and hence reduce product rejections and losses. Various corresponding technical solutions are available, but the diverse characteristics of fresh plant-based produce impede establishing valuable applications. Therefore, the aim of this review is to give an overview of IoT-enabled sensor and communication technology in relation to the specific quality and spoilage characteristics of fresh fruit and vegetables. Temperature, relative humidity (RH), O₂, CO₂ and vibration/shock are ambient parameters that provide most added value regarding product quality optimization, and can be monitored by current IoT-enabled sensor technology. Several wireless communication technologies are available for real-time data exchange and subsequent data processing and usage. Although many studies investigate the general possibility of monitoring systems using IoT-enabled technology, large-scale implementation in fresh fruit and vegetable supply chains is still hindered by unsolved challenges.

A trial with different concentrations of DL-methionine (DLM) and DL-2-hydroxy-4-methylthiobutanoic acid (DL-HMTBA) in broiler feed was performed to investigate their effect on the meat quality parameters and the shelf life of breast fillet. In total, fillets from 210 male broiler chickens (Ross 308) were tested in seven groups with 30 animals each. Three different concentrations (0.04, 0.12, and 0.32%; on an equimolar basis) of either DLM or DL-HMTBA were added to a basal diet, summing up to seven treatment groups. After slaughter, fillets were packed aerobically and stored at 4°C. The investigated parameters comprised measurements of microbial as well as physicochemical parameters, such as pH, drip loss, cooking loss, and color measurements. Additionally, sensory investigations were conducted and shelf life was calculated. Mean pH values were between 6.1 and 6.4. Drip loss values were low, with mean values below 0.4%. The cooking loss ranged between 22% and 28% on average. The fillets showed a normal initial microbial quality (2.5 log₁₀ cfu/g) and spoilage process with microbial counts of 8.5 log₁₀ cfu/g at the end of storage. The study revealed a significant influence of methionine supplementation on the quality of broiler breast meat in comparison with the basal group. Methionine supplementation led to higher pH values and a higher water binding. Higher concentrations of methionine had a positive influence on the water-holding capacity by lowering the cooking loss. The L^∗ value showed a significant negative correlation to the methionine concentration supplemented. No differences in physicochemical as well as sensory parameters could be detected between both methionine sources. The fillets showed a normal sensory spoilage process and a shelf life of 6 d. White striping was positively correlated to fillet weight as well as color values and significantly affected the Purchase Decision, the sensory investigation, and thus the shelf life of the samples.

Production-specific factors, such as breeding, diet, and stress, are known to influence meat quality, but the effect of different husbandry systems on the development of quality parameters and shelf life has hardly been investigated. Thus, the aim of the study was the investigation of an alternative production system based on a slow-growing, corn-fed, and antibiotics-free chicken line compared with conventional poultry production. Additionally, the effect on meat quality, microbiology, and spoilage was analyzed. In total, 221 breast filets from a German poultry meat producer were investigated. Nutritional, biochemical, and cooking loss analyses were conducted on a subset of samples 24 h after storage. The rest of the samples were stored aerobically at 4°C, and the spoilage process was characterized by investigating pH, color, lipid oxidation, microbiology, and sensory attributes subsequently every two days during storage. The alternative production line showed a significantly healthier nutritional profile with a higher protein and lower fat content. Additionally, the amount of L-lactic acid and D-glucose was significantly higher than in the conventional production line. The color values differed between both production lines, with the corn-fed line displaying more yellowish filets. The lipid oxidation and microbial spoilage were not affected by the production line. The shelf life did not differ between the investigation groups and was deemed 7 days in both cases. Despite the highest severity of white striping being observed most in the conventional production line, there was no overall difference in the incidence among groups. The purchase decision was affected by the occurrence of white striping and showed a tendency for a higher acceptance for the alternative production line.

Different conveyor belt materials used by the meat and other food industries were compared, regarding their cleanability as bacterial reduction rates in relation to their surface topography. Eleven thermoplastic polymers, four stainless steels, and five aluminized nanostructured surfaces were investigated under laboratory conditions. Cleanings were conducted with water only, and with an alkaline foam detergent. Overall, scanning electron microscopy revealed remarkable differences in the surface topography of the tested surfaces. Water cleaning results showed that nanostructured aluminized surfaces achieved significantly higher cleanability rates compared to the eight thermoplastic surfaces, as well as the glass-bead blasted rough stainless steel. Thermoplastic surfaces showed overall low cleanability rates when cleaned with alkaline detergent, while stainless steel and nanoporous aluminum showed high variations. Overall, nanoporous aluminum showed promising results as it can be used to coat conveyor belts. However, compatibility with cleaning detergent and sensitivity to scratches must be further investigated. Overall, it can be concluded that cleanability is not only influenced by surface roughness, but also by the overall surface finish, scratches, and defects.

Food-processing companies are controlled by societal influences and economic interests, but their efforts with regard to reducing food loss and waste are very different. This qualitative study aims to identify basic recommendations of good practice for the food-processing industry in order to prevent and handle food loss and waste. For this purpose, a comprehensive literature review was conducted in the field of food waste prevention and data was collected from thirteen German companies. The findings summarize the recommendations of good practice, which cover the entire supply chain from supplier to consumer and beyond. The analysis showed that the participating companies are already partially aware of operational measures, even if they are applied or mentioned without a systematic approach. Furthermore, the analysis revealed that most activities relate to internal matters, like processing, employees and utilization. However, the responsibility of food-processing companies does not end with internal processes to reduce food waste. The results show that some companies are already aware of their responsibility to be involved along the entire supply chain. Finally, the results show that the needs of consumers and suppliers must also be considered in order to reduce food waste, in addition to direct reduction measures. This paper highlights nine important stages and 53 basic recommendations for companies to address food loss and waste in order to improve their practices.

Food loss and waste is a recurring issue of discussion that food processing companies can no longer avoid. Society, stakeholders, and directives are demanding more and more communication on sustainability issues. However, only just under half of food processing companies stated that they provide consumer information on food waste. However, consumer information is only one way of communicating about food waste. The aim of this study is to identify key themes for relevant online communication on food waste that companies should be communicating to support the German National Strategy for the Reduction of Food Waste and to determine whether companies are already using these themes online. For this purpose, national strategy experts were asked through a questionnaire which topics were relevant according to the national strategy. The websites of 105 food processing companies were analyzed using content analysis to determine the status quo of food waste communication and assessed for relevance according to the national strategy. This paper presents five prioritized clusters of topics for relevant online communication on food waste for companies. The top priorities for communication, Cluster 1, are “Business Goals”, “Business Strategy”, “Process”, “Consumer Information”, “In-house Transparency”, and “Utilization of Remaining Materials”. The status quo shows that 43.8% of the companies provided online content regarding food waste. Through theory-driven content analysis, the three most common topics were identified in relation to food waste, namely the following: “Business Goals”, “Product and Packaging”, and “Consumer Information”. Companies communicated in line with the priority clusters. However, the frequency of topics and the way they are communicated varies widely. Only “Consumer Information” and “Business Goals” from Cluster 1 are commonly communicated. During the COVID-19 pandemic and the war in Ukraine, there was a decline in publications on food waste, and afterward, more consumer-oriented content was published rather than communicating the relevant topics. Companies are expected to have two objectives in their communication: to communicate with consumers and to be transparent about their targets, data, and utilization of food waste. The results also show differences between subsectors, the occurrence of the topics over time, and examples. The findings are aimed at policymakers, researchers, and companies as a starting point for improving the consistency and transparency of food waste communication in line with the national strategy. The results are also of international interest due to the common challenges of food waste and international food companies.