The areca nut is one of the most important cash crops in the tropics and has substantial economic value. However, the research information about the edible quality of different areca nuts is still insufficient. This study compared the composition, texture characteristics and flavor release behaviors of four different areca nuts (AN1, AN2, AN3 and AN4) and two commercially dried areca nuts (CAN1 and CAN2). Results showed that AN1 had higher soluble fiber and lower lignin, which was the basis of its lower hardness. Meanwhile, the total soluble solid (TSS) of AN1 was the highest, which indicated that AN1 had a moister and more succulent mouthfeel. After the drying process, the lignification degree of AN1 was the lowest. Through textural analyses, the hardness of AN1 was relatively low compared to the other dried areca nuts. AN1, CAN1 and CAN2 had higher alkaline pectin content and viscosity, and better flavor retention, which indicated better edible quality. The present study revealed the differences of various areca nuts and provided vital information to further advance the study of areca nuts.

In this study, a system was designed that can encapsulate and deliver gallic acid (GA), which was composed of polysaccharide polymers based on sodium alginate (SA), carboxymethyl chitosan (CCT), and cellulose nanofibers (CN) and was assisted by porous starch. The compositions were characterized by rheology and zeta potentials, and the results showed that the materials used in this study could effectively guarantee the stability of the system. The morphology and chemical structure of the beads were characterized by SEM and FT-IR, the results indicated that the addition of CCT could effectively reduce the cracks and pores on the surface of the beads, which was beneficial to the encapsulation and delivery of GA. Moreover, the results of the swelling rate, release tests, and antioxidant tests also proved the effectiveness of the system. The pH response effect of SA/CN/CCT (SCC) beads and the protection of GA were superior, and the release rate of GA in simulated gastric fluid (SGF) was only 6.95%, while SA and SA/CN (SCN) beads reached 57.94% and 78.49%, respectively. In conclusion, the interpenetrating network polymers constructed by SA, CCT, and CN, which, combined with porous starch as a coating layer, can achieve the embedding and the delivery of GA.