En el presente estudio se busca verificar que los oferentes de los procesos de licitación de obra tienden a disminuir sus presupuestos de las ofertas con la intención de obtener una mejor calificación, incrementando su probabilidad de hacerse adjudicatario de la misma, se considera que una disminución en el capital conduciría a una reducción en la calidad de los materiales empleados en la etapa de construcción, teniendo un impacto negativo en la calidad final. Se hizo un levantamiento de datos de todos los procesos de licitación de obra que fueron publicados en el portal SERCOP, esta muestra fue clasificada en cuartiles según el monto adjudicado, siendo el cuartil 1 el que engloba a los procesos adjudicados a la oferta más baja y el cuartil 4 abarca a los procesos adjudicados a la oferta más alta, para correlacionar la calidad de las obras se aplicó dos encuestas, una dirigida a los fiscalizadores y otra para los usuarios de cada obra, acorde al cuartil que pertenece cada proceso se observó que existe una tendencia a adjudicar los procesos con la oferta más baja siempre que cumpla con los lineamientos del mejor costo, con el coeficiente de correlación de Pearson se identificó que existe una correlación positiva muy baja ,en la Zona 3 de la país se observa que el impacto de adjudicar los procesos de licitación de obra a los ofertantes con el presupuesto más bajo tiene relevancia muy leve en la calidad final de la estructura.
Background Geopolymers are alternative materials to cement because they require less energy in their production process; hence, they contribute to the reduction in CO2 emissions. This study aims to evaluate the possibility of using industrial residues such as silica fume (SF) to improve the physical and mechanical properties of a pumice stone (PS)-based geopolymer. Methods Through an experimental methodology, the process starts with the extraction, grinding, and sieving of the raw material to carry out the physical and chemical characterization of the resulting material, followed by the dosage of the geopolymer mixture considering the factors that influence the resistance mechanical strength. Finally, the physical and mechanical properties of the geopolymer were characterized. This research was carried out in four stages: characterization of the pumice stone, design of the geopolymer through laboratory tests, application according to the dosage of the concrete, and analysis of the data through a multi-criteria analysis. Results It was determined that the optimal percentage of SF replacement is 10%, which to improves the properties of the geopolymer allowing to reach a maximum resistance to compression and flexion of 14.10 MPa and 4.78 MPa respectively, showing that there is a direct relationship between the percentage of SF and the resistance. Conclusions Geopolymer preparation involves the use of PS powder with a composition rich in silicon and aluminum. The factors influencing strength include the ratio of sodium silicate to sodium hydroxide, water content, temperature, curing time, molarity of sodium hydroxide, and binder ratio. The results showed an increase in the compression and flexural strength with 10% SF replacement. The geopolymer’s maximum compressive strength indicates its non-structural use, but it can be improved by reducing the PS powder size.
1 August 2024 in Revista ingeniería de construcción
BIM (Building Information Modeling) methodology has established itself as an essential tool in the construction industry. Despite this, in Ecuador the implementation of BIM is lagging behind, and although there are some initiatives in private companies, its use is still limited. The purpose of this research is to identify the consequences in cost and time in construction projects due to the low level of use of BIM methodology in 30 projects of private companies in Ecuador. In order to achieve this, the BUA (BIM Use Assessment) tool was used to evaluate the level of BIM use in each project during the planning and design phases. Subsequently, cost and schedule data were collected for the evaluated projects. The results show that the main consequences of the low level of BIM usage are associated with the increase in cost and schedule. It is concluded that promoting the use of BIM is essential to improve the performance of the construction industry in Ecuador.
Background Geopolymers are alternative materials to cement because they require less energy in their production process; hence, they contribute to the reduction in CO2 emissions. This study aims to evaluate the possibility of using industrial residues such as silica fume (SF) to improve the physical and mechanical properties of a pumice stone (PS)-based geopolymer. Methods Through an experimental methodology, the process starts with the extraction, grinding, and sieving of the raw material to carry out the physical and chemical characterization of the resulting material, followed by the dosage of the geopolymer mixture considering the factors that influence the resistance mechanical strength. Finally, the physical and mechanical properties of the geopolymer were characterized. This research was carried out in four stages: characterization of the pumice stone, design of the geopolymer through laboratory tests, application according to the dosage of the concrete, and analysis of the data through a multi-criteria analysis. Results It was determined that the optimal percentage of SF replacement is 10%, which to improves the properties of the geopolymer allowing to reach a maximum resistance to compression and flexion of 14.10 MPa and 4.78 MPa respectively, showing that there is a direct relationship between the percentage of SF and the resistance. Conclusions Geopolymer preparation involves the use of PS powder with a composition rich in silicon and aluminum. The factors influencing strength include the ratio of sodium silicate to sodium hydroxide, water content, temperature, curing time, molarity of sodium hydroxide, and binder ratio. The results showed an increase in the compression and flexural strength with 10% SF replacement. The geopolymer’s maximum compressive strength indicates its non-structural use, but it can be improved by reducing the PS powder size.
8 January 2025 in NOVASINERGIA REVISTA DIGITAL DE CIENCIA, INGENIERÍA Y TECNOLOGÍA
Las especificaciones técnicas (ET) se componen de todos los elementos de un proyecto de construcción. Cada una de las ET debe contar con 7 apartados básicos que proporcionen información adecuada y precisa para la correcta ejecución del proyecto. Sin embargo, se han reportado retrasos en la construcción y sobrecostos generados por deficiencias en la definición de ET durante la fase de planificación de los proyectos de construcción. A pesar de las afectaciones del proyecto, la calidad de las ET ha sido escasamente estudiada para establecer sus principales fallas. El objetivo de esta investigación fue evaluar la calidad de ET en obras civiles a partir de la relación expectativa-realidad. Para ello se realizó una evaluación in situ durante días hábiles en un total de 176 partidas que se encontraban ejecutando o que han sido ejecutadas recientemente en 30 proyectos ubicados en la Zona 3 del Ecuador. Para el procesamiento e interpretación de los datos se utilizó el software SPSS. Los resultados muestran un 39,81% de calidad en las ET para la muestra analizada lo que podría ser la causa del aumento en costo y plazo que se ha evidenciado en muchos contratos públicos de construcción.