A metal–organic framework (MOF) material Mg-MOF-74 was prepared by a solvothermal method, and the influence of the solvent volume and mass–liquid ratio on the preparation process was investigated. Based on the iron-based modified biochar FeCeCu/BC obtained by the sol–gel method, functionalized modified MOF-based biochar composites were prepared by the physical mixing method, co-pyrolysis method, sol–gel method and in situ growth method. The mercury removal performance and structural characteristics of the samples were studied, and the adsorption mechanism and key action mechanism were studied by using the adsorption kinetic model. Increasing the solvent volume and the mass liquid ratio will make the crystallization and pore structure of Mg-MOF-74 worse and its mercury removal performance poor. For MOF-based FeCeCu/BC composites, the mercury removal performance of the composite samples prepared by the sol–gel method and co-pyrolysis method is the best, at 31% and 46% higher than that of modified biochar, respectively. Mg-MOF-74 plays a role in promoting pyrolysis and changing the pore structure in the composite. The mercury removal process of composite materials is the result of physical adsorption and chemical adsorption, external mass transfer and internal diffusion.
The temperature at which pollutants are treated varies across different industrial processes. To address the high cost of raw materials for MOFs and the low efficiency of Hg0 removal in low-temperature environments, a series of MIL-101(Cr)-derived carbon matrix composite materials were prepared by combining MIL-101(Cr) with biomass and multiple metals. These materials were synthesized through a sol-gel method followed by carbonization. This study investigates the effects of composite ratios and adsorption temperatures on Hg0 removal, utilizing XRD, BET, and other characterization techniques to elucidate the mercury-removal mechanism of the PDC-MIL composite materials. The results indicate that MIL101(Cr) significantly influences the formation of the gel skeleton. When the composite ratio of MIL-101(Cr) to biomass is 1:1, the material exhibits an optimal pore structure, leading to high Hg0 removal efficiency over a wide temperature range. The removal of Hg0 by these composite materials involves both physical adsorption and chemisorption. Low temperatures favor physical adsorption, while high temperatures promote chemisorption. The sol-gel composite method facilitates cross-linking polymerization between MOFs and SiO2, enabling better pore structure connectivity with biomass and MOFs, thereby optimizing the poor pore structure observed after pyrolysis. Consequently, the improved pore structure enhances physical adsorption at low temperatures, mitigates desorption at high temperatures, and increases the contact probability of Hg0 with active sites within the pores, significantly improving the mercury-removal ability of the material across a broad temperature range.
To reduce the mercury content in flue gas from coal-fired power plants and to obtain high-performance, low-cost mercury adsorbents, a novel composite material was prepared by structural design through the in situ growth method. Functionalization treatments such as the modification of functional groups and multilayer loading of polymetallic were conducted. These materials include the MOF material UiO-66 and modified biochar doped with Fe/Ce polymetallic, both of which contain unsaturated metal centrals and oxygen-containing functional groups. On the basis of obtaining the effects of adsorption temperature and composite ratio on the Hg0 removal characteristics, coupling and synergistic mechanisms between the various types of active centers included were investigated by using a variety of characterization and analysis tools. The active adsorption sites and oxidation sites were identified during this process, and the constitutive relationship between the physicochemical properties and the performance of Hg0 removal was established. The temperature-programmed desorption technique, Grand Canonical Monte Carlo simulation, and adsorption kinetic model were employed to reveal the mechanism of Hg0 removal. The results showed that the UiO-66-Br@MBC composite adsorbent possessed an excellent Hg0 removal performance at adsorption temperatures ranging from 50 to 250 °C, and targeted construction of adsorption and oxidation sites while maintaining thermal stability. The Hg0 removal by the composites is the result of both adsorption and oxidation. The micropores and small pore mesopores in the samples provide physical adsorption sites. The modified biochar acts as a carrier to facilitate the full exposure of the central metal zirconium ions, the formation of more active sites, and the process of electron transfer. The doping modification of the Br element can enhance the overall redox ability of the sample, and the introduced Fe and Ce polymetallic ions can work in concert to promote the oxidation process of Hg0. The excellent regulation of the ratio between adsorption and oxidation sites on the surface of the composite material finally led to a significant boost in the samples’ capacity to remove Hg0.
Coal-fired power plants, as the largest source of human-made mercury emissions, often lack specialized mercury emission control devices. Therefore, developing cost-effective adsorbents and studying their regeneration properties are highly important for mercury removal from flue gas. In this study, the regeneration efficiency and stability of a composite material made from polymetallic Fe/Cu-doped modified biochar combined with the MOF material Cu-BTC were investigated. Based on the analysis of microscopic characteristics, the molecular structure of the regenerated composites was modeled, and the adsorption and regeneration process of Hg0 on their surface was simulated using density functional theory. This helped uncover the underlying mechanisms of mercury removal and regeneration. The results indicate that the optimal regeneration temperature and atmosphere were 350 °C and 5% O2, resulting in the formation of a derived carbon material. The regeneration efficiency reached 92% of that of the original mercury adsorption capacity, and over 80% efficiency was maintained after 10 regeneration cycles. The regenerated samples adsorbed Hg0 through the combined action of surface metal oxides, the metal element Cu, and oxygen-containing functional groups.
The common root characteristic of CO2 and air pollutants in the power industry, both derived from fossil fuel combustion, provides a natural basis for their synergistic emission reduction. However, existing studies suffer from the lack of a multi-pollutant synergistic evaluation system and an imperfect emission reduction technology database, which hinder their ability to support low-cost and high-efficiency emission reduction practices in the industry. Targeting the minimization of synergistic emission reduction costs and the maximization of emission reduction effects, this study integrated the process and economic parameters of 11 power generation technologies and 55 pollutant control technologies to establish a full-chain energy conservation and emission reduction technology database for the power industry, through literature research, industry surveys, and data mining. Based on the definition of pollution equivalent in the Environmental Protection Tax Law, we innovatively developed an air pollutant equivalent normalization evaluation method and constructed a two-dimensional coordinate system comprehensive evaluation system for CO2 and air pollutants, enabling quantitative analysis and visual evaluation of the synergistic emission reduction effects of various technologies. The results show that new energy power generation technologies such as nuclear power and wind power, as well as O2/CO2 cycle combustion, ammonia-based desulfurization, and SNCR-SCR combined reduction technologies, exhibit excellent synergistic emission reduction performance for CO2 and multiple pollutants. In contrast, some conventional pollutant control technologies, such as the limestone-gypsum method and traditional electrostatic precipitation, have significant CO2 emission increase antagonistic effects. This study also completed the two-dimensional classification of 66 emission reduction technologies based on “emission reduction efficiency-economic cost”, identified application scenarios for different types of technologies, and proposed optimized paths for synergistic emission reduction adapted to the development of the power industry. The research findings fill the gap in quantitative standards for multi-pollutant synergistic emission reduction, provide theoretical support and detailed technical references for emission reduction technology selection and environmental policy formulation in the power industry, and help the industry achieve the dual development requirements of the “double carbon” goal and air quality improvement.
Blade icing in cold climates poses significant risks to operational stability and results in substantial power generation deficits. This study establishes and validates an integrated multiscale framework, CFD-OpenFAST-Stacking, to characterize the complex aeroelastic behavior of iced wind turbines and facilitate high-fidelity power forecasting. The methodology utilizes high-fidelity CFD to quantify the aerodynamic degradation of simulated iced airfoils. These data are subsequently coupled with the OpenFAST aeroelastic platform for full-scale turbine simulations to evaluate the system’s dynamic response. A Stacking ensemble learning model is developed by synthesizing these simulation results with historical SCADA data through an innovative data-fusion approach. Numerical findings indicate that icing severely compromises aerodynamic efficiency, inducing a 17.65% reduction in the maximum lift coefficient and a 34.07% escalation in drag at the aerodynamically sensitive blade tip. Consequently, the rated power point is shifted from 10.5 m/s to 13 m/s, with performance degradation most prominent in the low-to-medium wind speed regime. Model validation demonstrates that the data-fusion technique significantly improves predictive robustness, increasing the R2 from 0.75 to 0.84 while reducing the RMSE from 37.69 to 17.04. SHAP analysis further identifies generator speed and wind speed as the primary determinants of power variability. This research substantiates the efficacy of bridging physical simulations with data-driven methodologies, providing a robust theoretical framework for performance evaluation in extreme weather environments.