Investigated are the regularities of fault slip under weak impulsive disturbances in laboratory experiments. The fault was simulated by an interface between two granite blocks loaded with normal and shear stresses, and the impulsive disturbances were excited by impacts of steel balls. We found that the passage of an elastic wave does not produce any residual displacement in the absence of shear load. But the process of inelastic fault deformation manifests quite vividly even under a slight constant shear stress. The sign of residual deformation does not depend on the direction of pulse propagation, but it does coincide with the direction of the applied shear load. Depending on the stress–strain state of the fault and the parameters of the impact, there are two scenarios of fault evolution: (1) production of residual deformations with decaying amplitudes under repeated cycles or (2) initiation of slow deformation process and accumulation of displacements up to the occurrence of slip instability. In the case of a continuously increased shear load, the effects of weak periodic impacts essentially depend on the initial slip behavior. The weakest effect is observed in the case of high‐amplitude stick‐slip. In contrast, in the case of slow, irregular quasi‐dynamic slip, tapping leads to an almost complete transformation of the potential energy of deformation into aseismic creep. Thus, a short dynamic disturbance propagating within a stressed blocky medium can trigger a slow deformation process whose contribution to the cumulative deformation may be quite appreciable. Because postdynamic movements can contribute substantially, a delay in the manifestation of dynamic events with respect to the moment of the initial disturbance may be observed. In turn, periodic dynamic disturbances of the stress–strain state can essentially change the mode of background seismicity and the proportion of radiation efficiency of events.
A comprehensive monitoring at the territory of the Korobkovskoe and Lebedinskoe iron ore deposits of the Kursk Magnetic Anomaly (KMA), which are developed using explosive technologies, has been carried out since July 2019 near the town of Gubkin (Belgorod Region, Russia). A unique database of the responses of the system “reservoir–well” to short-delay explosions in a mine and a quarry has been formed with a sampling rate of 200 Hz on the basis of synchronous seismic, barometric, and precision hydrogeological measurements. The research object is groundwater in the zones of exogenous weathering and tectonic fracturing of the ore-crystalline basement of the Archean-Proterozoic. Processing hydrogeological responses to mass explosions in the mine and the quarry made it possible to indicate two types of water level response to seismic impact. In addition to coseismic variations in the pore pressure in the system “reservoir–well” for the first time postseismic hydrogeological effects were established during the exploitation of the iron ore deposits. The observed effects may have been caused by two mechanisms. The first mechanism is represented by the skin effect—a change in the permeability of a fluid-saturated reservoir in the near-wellbore space. The second one is the renewal of existing fracture systems and the formation of technogenic fractures in the zones of lithological-stratigraphic contacts and faults at the interface between weathered and relatively monolithic rocks. The subsequent decrease of the water level in the well is associated with the filling of the fractured zones with water.