In a complex electromagnetic environment, any noise present generally exhibits strong impulsive characteristics. The performance of existing parameter estimation methods carried out in Gaussian white noise for the linear frequency modulation (LFM) signal degrades or even fails under impulsive noise. This paper proposes a novel parameter estimation method to address this problem. Firstly, the properties of the piecewise nonlinear amplitude transform (PNAT) are derived. This manuscript verifies that the PNAT can retain phase information of the LFM signal while suppressing the impulsive noise. Subsequently, a new concept known as piecewise nonlinear amplitude transform parametric symmetric instantaneous autocorrelation function (PNAT-PSIAF) is proposed. Based on this concept, a novel method called piecewise nonlinear amplitude transform Lv’s distribution (PNAT-LVD) is proposed to estimate the centroid frequency and chirp rate of the LFM signal. The simulations show that the proposed algorithm can effectively suppress the impulsive noise without prior knowledge of the noise for both the single-component and double-component LFM signal. In addition, two parameters of the LFM signal can be precisely estimated by the proposed method under low generalized signal-to-noise ratios (GSNR). The stronger the impulsive characteristics of the noise, the better the performance of the algorithm.
Due to the complex range migration characteristics of large squint angle synthetic aperture radar (SAR), it is difficult for traditional SAR deceptive jamming algorithms to balance focusing ability and computational efficiency. There is an urgent demand for proposing a deceptive jamming algorithm against large squint angle SAR in the field of SAR jamming. This article proposes a deceptive jamming algorithm against SAR with large squint angles based on non-linear chirp scaling and low azimuth sampling reconstruction (NLCSR). The NLCSR algorithm uses a high-order approximation of a high-precision model to accurately construct the jammer’s frequency response (JFR) function. In line with the notion of low azimuth sampling processing of the transformation domain, the construction of the space-variant azimuth modulation phase item is completed using the non-linear chirp scaling method. Compared with the traditional deceptive jamming algorithms against the large squint angle SAR, the NLCSR algorithm only needs Fourier transform and complex multiplication while ensuring the focusing ability, which is easier to implement on an efficient parallel digital signal processor based on fast Fourier transform (FFT). Simulation results prove the superior property of the NLCSR algorithm in focusing ability and computational efficiency. Compared to the existing large squint angle SAR deceptive jamming algorithm, the focusing ability of the NLCSR algorithm is almost the same, and the calculation efficiency is improved by at least 52.1%.
Synthetic aperture radar (SAR) is essential for obtaining intelligence in modern information warfare. Wideband chirp signals with a low signal-to-noise ratio (SNR) are widely used in SAR. Intercepting low-SNR wideband chirp signals is of great significance for anti-SAR reconnaissance. Digital channelization technology is an effective means to intercept wideband signals. The existing digital channelization methods have the following problems: the contradiction of reception blind zone and signal spectrum aliasing, high computational complexity, and low estimating accuracy for chirp signals with a low SNR. This paper proposes a non-critical sampling digital channelized receiver architecture to intercept chirp signals. The receiver architecture has no blind zone in channel division and no aliasing of signal spectrum in the channel, which can provide reliable instantaneous frequency measurements. An adaptive threshold generation algorithm is proposed to detect signals without prior information. In addition, an improved instantaneous frequency measurement (IFM) algorithm is proposed, improving low SNR chirp signals’ frequency estimation accuracy. Moreover, a simple channel arbitration logic is proposed to complete the cross-channel combination of wideband signals. Simulations show that the proposed receiver architecture is reliable and robust for low SNR and wideband chirp signal detection. When the input SNR is 0 dB, the absolute frequency root-mean-square error (RMSE) of bandwidth and the center frequency is 0.57 MHz and 1.05 MHz, respectively. This frequency accuracy is great for radio frequency (RF) wideband systems.
Resolution and mapping bandwidth are the two most important image performance indicators that reflect satellite synthetic aperture radar (SAR) imaging reconnaissance capability. The PRI-staggered signal can simultaneously achieve high resolution in azimuth and wide swath during SAR imaging, and is an important signal form of SAR. It is important for anti-SAR reconnaissance to de-interleave the staggered PRI signal from the mixed signals. To address the problem that the existing staggered signal de-interleaving algorithms cannot accommodate PRI jitter and are computationally inefficient, this paper proposes an efficient algorithm for de-interleaving staggered PRI signals. A clustering-based square sine wave interpolation method and a threshold criterion are proposed, improving computational efficiency while suppressing interference between sub-PRIs and the frame period of the staggered PRI signal. In addition, a sequence retrieval algorithm incorporating matched filter theory is proposed to improve the separation accuracy of radar pulse sequences. The simulation shows that the novel algorithm can adapt to PRI jitter and de-interleave staggered PRI signals from mixed signals with high efficiency. Compared with the existing staggered signal de-interleaving algorithm, the computational efficiency is improved by an order of magnitude.
Synthetic aperture radar (SAR) operating mode recognition plays a crucial role in SAR countermeasures and serves as the foundation for effective SAR interference. To address the limitations of current SAR operating mode recognition algorithms, such as low recognition rates, poor generalization, and limited engineering applicability under low signal-to-noise ratio (SNR) conditions, an enhanced algorithm named dual-input feature fusion ShuffleNet (DIFF-ShuffleNet) based on intercepted SAR signal data is proposed. First, the SAR signal is processed by combining pulse compression and time–frequency analysis technology to enhance anti-noise robustness. Then, an improved lightweight ShuffleNet architecture is designed to fuse range pulse compression (RPC) maps and azimuth time–frequency features, significantly improving recognition accuracy in low-SNR environments while maintaining practical deployability. Moreover, an improved coarse-to-fine search fractional Fourier transform (CFS-FRFT) algorithm is proposed to address the chirp rate estimation required for RPC. Simulations demonstrate that the proposed SAR operating mode recognition algorithm achieves over 95.00% recognition accuracy for SAR operating modes (stripmap, spotlight, sliding spotlight, and scan) at an SNR greater than −8 dB. Finally, four sets of measured SAR data are used to validate the algorithm’s effectiveness, with all recognition results being correct, demonstrating the algorithm’s practical applicability.