The solubility and partition coefficient are essential physicochemical parameters in developing a pharmaceutical dosage form of medicine. In addition, these parameters help to predict the absorption of an active compound in oral or topical dosage forms. Salicylamide, an active ingredient available in oral and topical dosage forms, is a weak acid (pKa 8.2) and is sparingly soluble in water. Meanwhile, its solubility and partition coefficients are influenced by the pH of the environment. The Henderson-Hasselbalch equation is used to predict solubility-pH and partition-pH profiles at various pH solutions. This study aims to determine salicylamide's solubility and partition coefficient in various pH (2–11). Both tests were carried out in various pH buffer solutions (at a concentration of 0.02 M and 0.2 ionic strength) in a water bath shaker at a temperature of 37 ± 0.5 °C. In addition, the salicylamide content was determined using the UV spectrophotometer method at the maximum wavelength at each pH. The results showed that the solubility increased at pH 2–10, while the partition coefficient value decreased. On the other hand, at pH 11, there was an increase in the number of ionized species, but the solubility decreased.
25 June 2021 in Journal of Basic and Clinical Physiology and Pharmacology
Objectives: Cyclodextrin’s ability to form an inclusion complex with a guest molecule is a function of two factors. The first is steric and depends on the relative size of cyclodextrin cavity to the guest molecule, while the second is the thermodynamic interaction between the different system components. This study therefore aims to determine the effect of β-cyclodextrin and hydroxypropyl-β-cyclodextrin as complex formers, on thermodynamic parameter values (Δ H , Δ G , and Δ S ) in the formation of inclusion complex with p -methoxycinnamic acid ( p MCA). Methods: The p MCA complex formation with β-cyclodextrin or hydroxypropyl-β-cyclodextrin was determined in 0.02 pH 4.0 M acetate buffer and 0.02 M pH 7.0 phosphate buffer, with a 0.2 µ value at 32, 37, and 42 ± 0.5 °C. This experiment was carried out in a waterbath shaker until a saturated solution was obtained. Subsequently, p MCA concentration was determined using UV spectrophotometer at the maximum p MCA wavelength, at each pH. Results: The result showed p MCA formed inclusion complex with β-cyclodextrin or hydroxypropyl-β-cyclodextrin and exhibited increased solubility with increase in β-cyclodextrin or hydroxypropyl-β-cyclodextrin concentration. This temperature rise led to a decrease in the complex’s constant stability ( K ). Furthermore, the interaction showed a negative enthalpy (∆ H <0) and is a spontaneous processes (∆ G 0), however, at pH 7.0, the system’s entropy decreased (∆ S <0). Conclusions: The rise in p MCA solubility with increase in cyclodextrin solution concentration indicates an inclusion complex has been formed, and is supported by thermodynamic data.
30 March 2023 in Journal of Public Health in Africa
Background: Quercetin acts as an antioxidant, anti-inflammatory, wound healing, and anti-aging so quercetin can be used as a topical preparation. However, it has low solubility in water at 0.01 mg/ml at 25°C. Increasing the solubility of quercetin in water was done by the addition of surfactants. Objective: This study compared the solubility of quercetin in Polysorbate 20 (P20) and Polysorbate 80 (P80) in a citrate buffer medium pH 4.5±0.2. Methods: The surfactants Polysorbate 80 and Polysorbate 20 differ in their alkyl chain length. Polysorbate 80 has an alkyl chain length of 18, while Polysorbate 20 has an alkyl chain length of 12. The concentrations of surfactant are above, below, and at the critical micelle concentration (CMC) values. The concentrations of quercetin were determined at the maximum wavelength by spectrophotometric method. Results: The results of the quercetin solubility test without surfactant were 3.89±0.59 mg/L. The results of the quercetin solubility test by adding Polysorbate 20 at a concentration of 42.0 ppm; 57.5 ppm; and 73.0 ppm were 3.62±0.72, 4.04±0.23 and 8.35±1.97 mg/L, respectively. While the solubility of quercetin by adding Polysorbate 80 at a concentration of 4.0 ppm, 11.5 ppm, and 19.0 ppm was 11.15±0.72, 11.37±1.23 and 14.17±1.96 mg/L, respectively. The solubility of quercetin is greater after the addition of surfactant Polysorbate 20 only at the concentration above the CMC value and the solubility of quercetin is greater with the addition of surfactant Polysorbate 80 at all concentrations. Surfactant Polysorbate 20 increases the solubility of quercetin in citrate buffer pH 4.5±0.2 only at concentrations above the CMC value of 2.14 times. Polysorbate 80 can increase the solubility of quercetin in citrate buffer pH 4.5±0.2 at concentrations below, at, and above CMC by 2.87, 2.92, and 3.63 times, respectively. Conclusion: Polysorbate 80 can increase the solubility of quercetin in citrate buffer pH 4.5±0.2 higher than Polysorbate 20.
27 May 2024 in Advances in Pharmacological and Pharmaceutical Sciences
This study aimed at developing and optimizing the orally dispersible thin film (ODTF) containing a plant-derived drug—curcumin (CUR). CUR belongs to a biopharmaceutical classification system (BCS) class IV compound that requires improving its water solubility and tissue permeability preceding formulation. An ODTF was applied to produce a solid dispersion matrix for CUR to resolve such solubility and permeability problems. The film-forming polymers used in the study were cellulose-based (hydroxypropyl methylcellulose/HPMC and carboxymethylcellulose/CMC) and saccharide-based maltodextrin (MDX). Poloxamer (POL) was also employed as surfactant and solubilizer. The solvent casting technique was applied to produce the films. The ethanolic solution of CUR was mixed with an aqueous solution of POLs and then incorporated into different film-forming polymers prior to casting. The processing of the CUR with POL solution was intended to aid in the even dispersion of the drug in the polymeric matrices and enhance the wettability of the films. The physical state and properties of the films were characterized in terms of their morphology, crystallinity of the drug, and phase miscibility of the mixtures. The dissolution profile of the films was also evaluated in terms of dissolution rate and dissolution efficiency. The obtained ODTF products were smooth and flat-surfaced. Physical characterization also indicated that the CUR was homogeneously dispersed in the ODTFs and no longer existed as crystalline material as revealed by X-ray diffraction (XRD). The CUR was also not phase-separated from the films as disclosed by differential scanning calorimetry (DSC). Such dispersion was achieved through the solubilizing effect of POLs and compact polymeric film matrices that prevented the CUR from recrystallization. Furthermore, the ODTFs also improved the dissolution of CUR by 3.2-fold higher than the raw CUR. Overall, cellulose-based films had favorable physical properties compared with saccharide-based films.
Background: Levofloxacin and ciprofloxacin are popular fluoroquinolone antibiotics that offer diverse therapeutic potentials due to their broad-spectrum activity. Levofloxacin and ciprofloxacin, commonly used as active pharmaceutical ingredients (API) in parenteral form, are amphoteric compounds with pH-sensitive solubility. This characteristic may affect the safety and efficacy of levofloxacin and ciprofloxacin, especially in the parenteral dosage forms. Objective: This study aims to assess the solubility of levofloxacin hemihydrate and ciprofloxacin lactate in buffer solutions with pH ranging from 3.0 to 8.0. Method: The solubility test was conducted in a 0.02 M buffer pH solution featuring an ionic strength (µ) of 0.2. After weighing several API samples, ultrasonication was carried out for 15 minutes. The solution was agitated at 150 rpm and 30 ± 0.5°C until it reached equilibrium (four hours). The API concentration was observed using a UV-Vis spectrophotometer. Result: The solubility ranges of levofloxacin hemihydrate and ciprofloxacin lactate were 44.39 to 70.66 mg/mL and 0.23 to 243.00 mg/mL, respectively, within the experimental pH range. Conclusion: This study concluded that levofloxacin hemihydrate and ciprofloxacin lactate solubility were increased due to decreasing pH medium.
Background: Osteoarthritis treatment generally involves using a Non-steroidal Anti-inflammatory Drug (NSAID), and the most common is Diclofenac sodium. The oral use of diclofenac sodium presents some adverse effects on the gastrointestinal tract. Trans-dermal diclofenac sodium's biological efficacy can be affected by factors including its log P value of 1.13. Nanostructured Lipid Carrier (NLC) may solve these concerns. Objective: This study examined how stearic and oleic acid concentrations customise diclofenac sodium NLC's physicochemical properties. Method: High shear homogenisation was used to compare stearic acid and oleic acid at 6:4, 7:3, and 8:2. Furthermore, the physicochemical properties of diclofenac sodium NLC were assessed, such as organoleptic, particle size and poly-dispersity index, pH, viscosity, zeta potential, entrapment efficiency, profiles of FTIR and DSC. Result: This study found that particle size ranged from 333.60 ± 144.29 to 791.77 ± 85.57, and entrapment efficiency was 89.38 ± 3.69 to 76.96 ± 3.29. Increasing the content of oleic acid as a liquid lipid reduces particle size and improves diclofenac sodium NLC entrapment. According to One-Way ANOVA, the dependent variable was not significantly affected by any independent variables (p-value > 0.05) except for particle size and entrapment efficiency. Conclusion: Stearic acid-oleic acid concentration ratios affect diclofenac sodium NLC's physicochemical properties.