Mangroves and moored barges are used individually for coastal protection and beach restoration. This conceptual paper discusses about the integration of mangroves with moored floating barges for coastal protection. The concept involves towing of a barge to a particular location, mooring it to the seafloor and planting mangroves along the shore or beach. The barges will be unmoored and towed away once the mangroves attain certain growth and are well rooted in the soil. Mangroves can protect the beach from incoming waves using their roots and branches. The incoming waves can be reduced by 50% to 99% using mangroves of 500 m width. Mangroves have a life span of 20–100 years, and they do not need any yearly maintenance as do any other conventional coastal protection measures. Mangroves are considered as soft coastal protection structures and are environmentally friendly. Mangroves will also improve the aesthetic appearance of the beach. This paper discusses about some of the research methodologies for the development of the barge-assisted mangroves coastal protection method. The dimensions of the barge, gap width between the moored barges and the environmental condition at the location determines the performance of the barge-assisted mangroves coastal protection method. The gap width between the barges, draft of the barge and breadth of the barge influence the resonant frequency of the fluid between the barges. The shielding effect of the floating barges can be used for other applications, such as berthing of ships and growing living shorelines using oysters, rocks, sand, plants, coir, etc. for coastal protection.
1 October 2017 in Journal of Composites for Construction
Carbon fiber–reinforced polymer (CFRP) tendons can serve as a viable alternative to steel strands in prestressing applications in which the noncorrosive nature of the strands helps reduce maintenance costs and extend the service life of the structure. An important consideration for CFRP tendons is the prestress level, which is currently limited by prevailing standards. A series of creep stress tests were conducted on carbon fiber–composite cables with generic field-made anchorages using commercially available expansive grout. Specimens withstood 95% of their guaranteed capacity for a period of five months (3,624 h) at a room temperature of 24°C (75°F) without rupture or any sign of distress. The experiments also showed quite an acceptable long-term performance for the generic field-made anchorage. In subsequent residual strength tests, all specimens still exceeded their guaranteed capacity after the extended high creep stress test.
Several studies have been reported in published literature on analytical solutions for a laterally loaded pile installed in a homogeneous single soil layer. However, piles are rarely installed in an ideal homogeneous single soil layer. The present study describes a new continuum-based analysis or energy-based approach for predicting the pile displacement responses subjected to static lateral loads and moments considering the soil non-linearity. This analytical analysis treats the pile as an elastic Euler–Bernoulli beam and the soil as a three-dimensional (3D) continuum in which the non-linear elastic properties are described by a modulus degradation relationship. The principle of virtual work was applied to the energy equation of a pile–soil system in order to obtain the governing differential equation for the pile and soil displacements. An iterative procedure was adopted to solve the equations numerically using a finite difference method (FDM). The pile displacement response was obtained using the software MATLAB R2021a, and the results from the energy-based method were compared with those obtained from the field test data as well as the finite element analysis (FEA) based on the software ANSYS Workbench 2021R1. The present study investigated the effect of explicit incorporation of soil properties and layering through a parametric study in order to understand the importance of predicting appropriate pile displacement responses in a linear elastic soil system. The responses indicated that the effect of soil layers and their thicknesses, pile properties and the variation in soil moduli have a direct impact on the displacements of piles subjected to lateral loading. Hence, a proper emphasis has to be given to account for the soil non-linearity. Considering the effect of soil non-linearity, it is observed that the results obtained from the energy-based method agreed well with the field measured values and those obtained from the FEA. The results indicated a difference of approximately less than 7% between the proposed method and the FEA. The approach presented in this study can be further extended to piles embedded in multi-layered soil strata subjected to the combined action of axial loads, lateral loads and moments. Furthermore, the same approach can be extended to study the response of the soil to group piles.
Scour around bridge piers is considered as one of the major factors which causes failure of bridges in the United States. An undetected scour can affect the stability of the bridge, eventually leading to the collapse of the bridge. The experimental investigation of scour around a pier using a non-contact measuring method is carried out in this research. A green laser-based non-contact ranging technique is performed on a prefabricated scour hole to study the factors influencing the ability to reconstruct the shape of a scour hole. The experiment was conducted in a 10 ft diameter pool and Leica scan station II was used for the scanning of the scour hole. The turbidity of the water was changed by adding Kaolinite powder to the water. The turbidity was varied from 1.2 NTU to 20.8 NTU by adding Kaolinite. The lab experiments involved changing the turbidity of water to simulate real world conditions. The results from the experimental study show that the turbidity of the water has a direct dependence on the efficiency of the green laser to map the underwater scour profile. The ability of the green laser to capture the fabricated scour hole and pool bed topography were decreased as the turbidity was increased even when the water depth of the pool was reduced. The results from the study show that the green laser is effective in underwater scanning and can be also used for bathymetry profiling and the detection of underwater objects. The method of underwater scanning using a green laser for detecting scour around bridge pier is safe, efficient, and economical.
1 October 2016 in Journal of Composites for Construction
Segmental bridges are widely used for accelerated construction and lower costs and environmental impact. The major concern with such bridges is in the corrosion protection of posttensioning steel strands. Noncorrosive carbon fiber strands can serve as viable alternatives to help reduce maintenance costs. A novel carbon fiber strand was tested for posttensioning of a 3.5∶1 scaled model of the Long Key segmental box girder bridge, and its performance was compared with prior test data for steel strands and another type of carbon fiber. The most important distinction between the two types of carbon fibers is their elastic moduli, which are 77 and 93% of that of steel strands. Numerical simulation was also conducted and the effect of different elastic moduli of the tendons on the structural performance was investigated with a parametric study. While the study confirms the feasibility of both types of carbon fiber strands for segmental bridge applications and their similar serviceability behavior, stran...
Numerous studies have been reported in the published literature on analytical solutions for a vertically loaded pile installed in a homogeneous single soil layer. However, piles are rarely installed in an ideal homogeneous single soil layer. This study presents an analytical model based on the energy-based approach to obtain displacements in an axially loaded pile embedded in multi-layered soil considering soil non-linearity. The developed analytical model incorporating Euler-Bernoulli beam theory proved to be an effective way in estimating the load-displacement responses of piles embedded in multi-layered non-linear elastic soil strata. The differential equations are solved analytically and numerically using the variational principle of mechanics. A parametric study investigated the effect of explicit incorporation of soil properties and layering in order to understand the importance of predicting appropriate pile displacement responses in linear elastic soil system. It is clear from the results that the analyses which consider the soil as a single homogeneous layer will not be able to produce an accurate estimation of the pile stiffnesses. Therefore, it is highly important to account for the effect of soil layering and the non-linear response. The pile displacement response is obtained using the software MATLAB R2019a and the results from the energy-based method are compared with those obtained from the field test data as well as the Finite Element Analysis (FEA) based on the software ANSYS 2019R3. The non-linear elastic constitutive relationship which described the variation of secant shear modulus with strain through a power law has shown reasonably accurate predictions when compared to the published field test data and the FEA. The developed mathematical framework is also more computationally efficient than the three-dimensional (3D) FEA.