The article presents the validation of two methods for analyzing the aerodynamic properties of the aircraft wing concerning aeroelastic effects. The first method is based on low-cost computational models (Euler–Bernoulli Beam Model and Vortex Lattice Method [VLM]). Its primary objective is to estimate the wing’s deformation early in the design stages and during the automatic optimization process. The second one is a method that uses solutions of unsteady Navier–Stokes equations (URANS). This method suits early design, particularly for unconventional designs or flight conditions exceeding lowfidelity method limits. The coupling of the flow and structural models was done by Radial Basis Functions implemented as a user-defined module in the ANSYS Fluent solver. The structural model has variants for linear and nonlinear wing deformations. Features enhancing applicability for real-life applications, such as the definition of deformable and nondeformable mesh zones with smooth transition between them, have been included in this method. A rectangular wing of a high-altitude long-endurance (HALE) aeroplane, built based on the NACA 0012 profile, was used to validate both methods. The resulting deflections and twists of the wing have been compared with reference data for the linear and nonlinear variants of the model.
This study investigates the static aeroelastic behavior of a lightweight, high-aspect-ratio wing designed for a solar-powered High Altitude Long Endurance (HALE) aircraft. The primary objective is to demonstrate that simplified, low-fidelity models can be effectively used to define the wing’s jig shape and stiffness distribution, ensuring optimal aerodynamic performance during cruise flight. High-aspect-ratio wings (HARWs) are susceptible to significant deformations under aerodynamic loading, which can alter the lift distribution and compromise performance. Therefore, accurate modeling of aeroelastic effects is essential, particularly in the early stages of the design process. The numerical analysis presented in this work uses a low-order, two-way fluid–structure interaction (FSI) method, combining the Vortex Lattice Method (VLM) and the Euler–Bernoulli beam model. This approach offers a balance between computational efficiency and physical accuracy. Validation was carried out by comparing simulation results with wind tunnel data, confirming the method's ability to predict lift coefficients and structural deformation with satisfactory accuracy. The study also introduces an innovative flat-upper-surface airfoil, optimized for solar panel integration and evaluated for static aeroelastic effects. Results show that, with a known distribution of stiffness and mass, the jig shape can be tailored to achieve the desired in-flight geometry. The proposed method provides a fast, reliable, and practical tool for early-stage wing design and is well-suited for engineering applications.