Polymer-derived ceramics (PDCs) strategy shows a great deal of advantages for the fabrication of advanced ceramics. Organosilicon polymers facilitate the shaping process and different silicon-based ceramics with controllable components can be fabricated by modifying organosilicon polymers or adding fillers. It is worth noting that silicate ceramics can also be fabricated from organosilicon polymers by the introduction of active fillers, which could react with the produced silica during pyrolysis. The organosilicon polymer-derived ceramics show many unique properties, which have attracted many attentions in various fields. This review summarizes the typical organosilicon polymers and the processing of organosilicon polymers to fabricate silicon-based ceramics, especially highlights the three-dimensional (3D) printing technique for shaping the organosilicon polymer- derived ceramics, which makes the possibility to fabricate silicon-based ceramics with complex structure. More importantly, the recent studies on fabricating typical non-oxide and silicate ceramics derived from organosilicon polymers and their biomedical applications are highlighted.
Bone defects caused by trauma, tumor, congenital abnormality and osteoarthritis, etc. have been substantially impacted the lives and health of human. Artificial bone implants, like bioceramic-based scaffolds, provide significant benefits over biological counterparts and are critical for bone repair and regeneration. However, it is highly probable that bacterial infections occur in the surgical procedures or on bioceramic-based scaffolds. Therefore, it is of great significance to obtain bioceramic-based scaffolds with integrative antibacterial and osteogenic functions for treating bone implant-associated infection and promoting bone repair. To fight against infection problems, bioceramic-based scaffolds with various antibacterial strategies are developed for bone repair and regeneration and also have made great progresses. This review summarizes recent progresses in bioceramic-based scaffolds with antibacterial function, which include drug-induced, ion-mediated, physical-activated and their combined antibacterial strategies according to specific antibacterial mechanism. Finally, the challenges and opportunities of antibacterial bioceramic-based scaffolds are discussed.
In the clinic, bone defects resulting from infections, trauma, surgical resection and genetic malformations remain a significant challenge. In the field of bone tissue engineering, three-dimensional (3D) scaffolds are promising for the treatment of bone defects. In this study, calcium sulfate hydrate (CSH)/mesoporous bioactive glass (MBG) scaffolds were successfully fabricated using a 3D printing technique, which had a regular and uniform square macroporous structure, high porosity and excellent apatite mineralization ability. Human bone marrow-derived mesenchymal stem cells (hBMSCs) were cultured on scaffolds to evaluate hBMSC attachment, proliferation and osteogenesis-related gene expression. Critical-sized rat calvarial defects were applied to investigate the effect of CSH/MBG scaffolds on bone regeneration in vivo. The in vitro results showed that CSH/MBG scaffolds stimulated the adhesion, proliferation, alkaline phosphatase (ALP) activity and osteogenesis-related gene expression of hBMSCs. In vivo results showed that CSH/MBG scaffolds could significantly enhance new bone formation in calvarial defects compared to CSH scaffolds. Thus 3D printed CSH/MBG scaffolds would be promising candidates for promoting bone regeneration.
Osteoarthritis (OA) is a degenerative disease that often causes cartilage lesions and even osteochondral damage. Osteochondral defects induced by OA are accompanied by an inflammatory arthrosis microenvironment with overproduced reactive oxygen species (ROS), resulting in the exacerbation of defects and difficulty regenerating osteochondral tissues. Therefore, it is urgently needed to develop osteochondral scaffolds that can not only promote the integrated regeneration of cartilage and subchondral bone, but also possess ROS‐scavenging ability to protect tissues from oxidative stress. Herein, zinc‐cobalt bimetallic organic framework (Zn/Co‐MOF) functionalized bioceramic scaffolds are designed for repairing osteochondral defects under OA environment. By functionalizing Zn/Co‐MOF on the 3D‐printed beta‐tricalcium phosphate (β‐TCP) scaffolds, the Zn/Co‐MOF functionalized β‐TCP (MOF‐TCP) scaffolds with broad‐spectrum ROS‐scavenging ability are successfully developed. Benefiting from its catalytic active sites and degradation products, Zn/Co‐MOF endows the scaffolds with excellent antioxidative and anti‐inflammatory properties to protect cells from ROS invasion, as well as dual‐bioactivities of simultaneously inducing osteogenic and chondrogenic differentiation in vitro. Furthermore, in vivo results confirm that MOF‐TCP scaffolds accelerate the integrated regeneration of cartilage and subchondral bone in severe osteochondral defects. This study offers a promising strategy for treating defects induced by OA as well as other inflammatory diseases.
22 February 2022 in Composites Part B: Engineering