Traditional laser diodes operating at 650 nm are more prone to high-order mode excitation, resulting in poorer beam quality. In this paper, we designed GaInP–AlGaInP laser diodes (LD) with a 650 nm range and a trench mode-modulation structure based on the structure of edge-emitting laser (EEL) diodes. The effect of the three-trench structure was investigated theoretically and experimentally. The right trench structure laser chips demonstrated good beam quality while maintaining a high power output. An electro-optical conversion efficiency of 56% was demonstrated with a slope efficiency of 1.32 W/A at a 40 mA current. The maximum optical output power reached 40.8 mW.

The pumping of Tm-doped crystal or fiber by a 792 nm semiconductor laser is an important way to generate a mid-infrared laser, which is widely used in various fields. In this paper, a high–power 792 nm fiber–coupled semiconductor laser module was successfully fabricated with the output power of 232 W at a 10 A continuous current and the electro-optic conversion efficiency of 48.6%. The laser module is coupled with 24 chips into a fiber by spatial multiplexing and polarization combination technology. For a single emitting laser chip, the continuous wave (CW) output power and threshold current are 10.45 W at 10 A and 1.55 A, respectively. A polarization as high as 94% can also be realized, which is more suitable for laser spatial beam combining. The laser module was aged for more than 4000 h at 12 A and 25 °C without obvious power degradation.