1,1,1,2-tetrafluoroethane (HFC-134a) is a potent greenhouse gas that can be degraded to produce trifluoroacetic acid (TFA), a degradation product that has an impact on aquatic ecology, so its emission has been a continuous concern worldwide. Existing studies mainly estimate the global- or national-scale emissions of HFC-134a, and there are relatively few studies on regional emissions, all of which used the top-down method. By establishing a regional-scale bottom-up emission inventory and comparing it with the regional-scale top-down estimation results, regional emissions can be verified and their emission characteristics and environmental impacts can be analysed. HFC-134 emissions were estimated for the first time in the North China Plain using the emission factor method, and spatiotemporal characteristics and environmental impacts were analysed for the period of 1995 to 2020. The results showed that the cumulative HFC-134a emissions were 88 (73–103) kt (126 Mt CO2-eq), which have led to an increase in global radiative forcing of 1.1 × 10−3 (0.9 × 10−3–1.3 × 10−3) W m−2, an increase in global surface temperature of 8.9 × 10−4 °C, and a cumulative TFA production of 7.5 (6.2–8.9) kt as of 2020. The major sources of HFC-134a emissions are the refrigeration and air conditioning sector, which involves the automotive air conditioning (MAC), industrial and commercial refrigeration, and air conditioning (ICR) sub-sectors. China joined the Kigali Amendment in 2021 to phase down HFCs and proposed the goal of carbon neutrality by 2060. The North China Plain is a region undergoing rapid economic development, with a relatively high proportion of GDP (29%) and car ownership (23%) in 2020. Additionally, HFC-134a emissions accounted for about 20% of the total emissions in China. Therefore, HFC-134a emissions and their environmental impact on the North China Plain should not be ignored.
Due to the high global warming potential and rapidly increasing atmospheric concentrations of fluorinated greenhouse gases (hereinafter referred to as F-gases), the emission estimation has been widely studied. Additionally, the atmospheric observation supports the emission estimation. However, there are few F-gas studies with respect to chemical plants. In this study, we firstly carried out atmospheric observation studies of F-gases around chemical plants in China. Four typical chemical plants were selected, and the concentration levels, their concentration differences (hereinafter referred to as the up–down difference) and enhanced ratios (hereinafter referred to as the up–down enhanced ratio) of the F-gases at upwind and downwind sites in the four plants were observed. Both the upwind and downwind observation results of each plant showed that the average concentrations of HFCs were the highest (57%–85%), followed by PFCs, while the total average concentrations of SF6 and NF3 only accounted for less than 5%. The F-gases, with both the larger up–down enhanced ratios and the larger up–down differences in each plant, may suggest larger emission strengths during fluorinated production, by-products and usage processes. Additionally, the numbers of F-gas species emitted from Plants A, B and C were all significantly higher than those from Plant D. This may be because the F-gases in Plants A, B and C were emitted not only during fluorinated production and by-product processes, but also during usage processes, with respect to refrigeration and air-conditioning or foam insulation materials. The F-gases emitted by each plant did not cause toxicity to humans at sensitive sites; however, they can cause nonnegligible climate impacts. In the future, it is necessary to select more typical chemical plants to carry out the atmospheric observation of F-gases, with a higher observation frequency and larger sample size, to further estimate F-gas emissions from chemical plants in China.
The increase in industrial production can lead to more complex emissions of O3 precursors, but the changes in the formation mechanism and source of O3 are still unclear. Taking Jincheng as the typical industrial city, an observation-based model (OBM) is explored to analyze the changes in O3 formation in 2022 and 2024. The results indicated that the concentration of NOx and VOCs in 2024 increased by 21.1% and 22.3%, respectively. And the concentrations of alkenes related to industrial processes increased significantly. RO2+NO is the main pathway for O3 formation (51.5~54.2%), while VOCs+OH· contributes most to the formation of RO2. VOC and NOx both play important roles in O3 formation, and the sensitivity of VOCs increased from 0.76 to 0.84 in 2022 and 2024, with alkenes increasing the most. Industrial processes and coal combustion are the important sources for O3 and its precursors, and the contribution of the industrial process increased significantly during 2022 and 2024. In summary, the increase in the industrial activity level has led to the increase in alkenes, which has a key impact on the formation of O3. Controlling the emission of alkene from the industrial process is the direction for the continuous control of O3 pollution in industrial cities.