Francisco Vedreño Santos

Dr. Francisco Vedreño Santos

orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2013 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
Francisco Vedreño SantosFrancisco Vedreño Santos
Francisco Vedreño Santos
MARTIN RIERA GUASPMARTIN RIERA GUASP
MARTIN RIERA GUASP
HHHumberto Henao
Humberto Henao
MPManuel Pineda-Sanchez
Manuel Pineda-Sanchez
Ruben Puche-PanaderoRuben Puche-Panadero
Ruben Puche-Panadero
This paper proposes a methodology to improve the reliability of diagnosis of different types of faults in wound-rotor induction generators which work under variable load conditions, as in wind turbine applications; the method is based on the extraction of the instantaneous frequency (IF) of the fault-related components of stator and rotor currents during speed changes caused by nonstationary functioning. It is shown that, under these conditions, the IF versus slip plots of the fault components are straight lines with a specific slope and y-intercept for each kind of fault. In addition, neither of these patterns are dependent on the machine features or the way that the load changes. The practical methodology of this technique is introduced for diagnosing two different anomalies: stator winding asymmetry and rotor winding asymmetry. The approach is validated by laboratory tests for both types of faults in two different kinds of machines.

3 June 2013 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
VCVicente Climente-Alarcon
Vicente Climente-Alarcon
Jose Alfonso Antonino DaviuJose Alfonso Antonino Daviu
Jose Alfonso Antonino Daviu
Francisco Vedreño SantosFrancisco Vedreño Santos
Francisco Vedreño Santos
Ruben Puche-PanaderoRuben Puche-Panadero
Ruben Puche-Panadero
In recent years, the study of transients of induction motors for diagnosis purposes has gained strength in order to overcome some inherent problems of the classical diagnosis of such machines, which uses Fourier analysis of steady-state quantities. Novel time-frequency techniques have been applied to these transient quantities, in order to detect the characteristic evolutions of fault-related harmonic components. The detection of these patterns, which are usually specific for each type of fault, enables reliable diagnostic of the corresponding failures. In this context, most of the works hitherto developed have been based on analysis of currents. However, in some applications, vibration measurements are also available. The goal of this work is to validate the applicability of this transient-based diagnosis framework to vibration measurements. A specific time-frequency decomposition tool, the Zhao-Atlas-Marks distribution, is proposed. Experimental results prove the ability of the approach to complement the information obtained from the current analysis. This may be very useful in applications in which the diagnosis via currents is uncertain or in which vibration signals can be easily measured.

1 September 2011
Verified
Conference Paper
Closed access
MARTIN RIERA GUASPMARTIN RIERA GUASP
MARTIN RIERA GUASP
JPJoan Pons-Llinares
Joan Pons-Llinares
Francisco Vedreño SantosFrancisco Vedreño Santos
Francisco Vedreño Santos
Jose Alfonso Antonino DaviuJose Alfonso Antonino Daviu
Jose Alfonso Antonino Daviu
MCM. Fernandez Cabanas
M. Fernandez Cabanas
This paper addresses the problem of diagnosing cage motors with double bar breakages involving non-consecutive rotor bars. As it is stated in previous works, the conventional diagnosis approaches fail when diagnosing this fault for certain relative positions of the broken bars. This work is focused on the study of the high order harmonics of the airgap-field produced by the fault; simple mathematical expressions are deduced which enable to evaluate the influence of the relative position of the broken bars on the amplitude of the fault related components (Left Sideband Harmonic and other high order fault components) of the stator current. These expressions demonstrate to be useful for confirming the diagnostic in uncertain cases; they are validated by finite element simulations and laboratory tests, using different diagnosis methodologies based both on steady-state and on transient analysis.

1 October 2012
Verified
Conference Paper
Closed access
JPJoan Pons-Llinares
Joan Pons-Llinares
VCVicente Climente-Alarcon
Vicente Climente-Alarcon
Francisco Vedreño SantosFrancisco Vedreño Santos
Francisco Vedreño Santos
Jose Alfonso Antonino DaviuJose Alfonso Antonino Daviu
Jose Alfonso Antonino Daviu
MARTIN RIERA GUASPMARTIN RIERA GUASP
MARTIN RIERA GUASP
Induction motor condition monitoring has primarily relied on the analysis of currents during steady-state operation through the Fast Fourier Transform (FFT). Nonetheless, this conventional approach has many constraints, most of them related to the usual operation of most motors under situations differing from a pure stationary regime, or directly under transient conditions. Indeed, these situations are the most common in many industrial processes, a fact that reveals the necessity of developing techniques suited for the analysis of machine quantities during non-stationary operation. A vast work has been developed during these recent years in this area, raising many transient-based techniques being able to diagnose machines under transient conditions which furthermore overcome some of the drawbacks of conventional stationary analysis. Most of these techniques are based on the application of proper signal processing tools, especially adapted to analyze transient signals (time-frequency decomposition (TFD) tools). This paper carries out a review of the most significant techniques sustained on transient-analysis, grouping them in accordance to the nature of the TFD tool used in each case. The review intends to emphasize the most relevant contributions of each work and to serve as a useful reference to all authors involved in the area.

26 July 2017 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
YGYang Guan
Yang Guan
ZZZ. Q. Zhu
Z. Q. Zhu
ZAZiad Azar
Ziad Azar
ATArwyn S. Thomas
Arwyn S. Thomas
Francisco Vedreño SantosFrancisco Vedreño Santos
Francisco Vedreño Santos
MOMilijana Odavic
Milijana Odavic
This paper compares the electromagnetic performance of 10-MW superconducting (SC) generators with three different topologies, i.e., iron-cored stator and rotor topology (ISIRT), iron-cored stator and air-cored rotor topology (ISART), and air-cored stator and rotor topology (ASART). The objective is to provide a powerful insight into the advantages and disadvantages of different topologies, and to establish some design guidelines for selecting an appropriate direct-drive SC generator for offshore wind turbine applications. First, the structures of the three SC generator topologies are introduced. Then, the influence of the SC coil cross-sectional area on torque capability is compared. After that three SC generators with different topologies are optimized, respectively, for further comparison, including the active material cost, weight, harmonics in the electromotive force, torque ripple, field harmonics in the SC coil, and forces on the rotor and stator components, etc. It is found that, with the same SC quantity, the torque capability of the ISIRT is much better than that of the other two topologies. However, the advantage becomes less significant when a larger area of the SC coil is employed. The air-gap flux density waveform of the ASART is much smoother than those of the ISIRT and ISART. The torque ripples of the ISIRT and the ISART are much higher than that of the ASART. The field harmonics (both amplitude and frequency) in the SC coil of the ASART are the lowest. For the ISIRT, most of the force on the rotor is acting on the rotor iron, and thus, the SC coil is more likely to be safe from a mechanical performance point of view and the design of the corresponding supporting structure is simple. However, for the air-cored rotor topologies, nearly all the force is acting on the SC coil. For the air-cored stator, the force mainly acts on the armature winding, whereas for the iron-cored stator, it is mainly on the stator teeth. Due to the excellent mechanical performance of iron, the iron-cored stator is therefore more robust.

1 June 2012
Verified
Conference Paper
Closed access
VCVicente Climente-Alarcon
Vicente Climente-Alarcon
MARTIN RIERA GUASPMARTIN RIERA GUASP
MARTIN RIERA GUASP
Jose Alfonso Antonino DaviuJose Alfonso Antonino Daviu
Jose Alfonso Antonino Daviu
JRJ. Roger-Folch
J. Roger-Folch
Francisco Vedreño SantosFrancisco Vedreño Santos
Francisco Vedreño Santos
Fault diagnosis in wind generators is drawing increasing attention among the scientific community and maintenance companies, due to the crucial contribution of this renewable power source in the electric power generation map. These machines usually operate through variable load regimes, a fact that makes the application of most conventional diagnostic techniques not suitable, since they are adapted to analysis of stationary quantities. In this context, the application of modern transient-based methodologies becomes very appropriate. In this paper, a technique based on the application of Wigner-Ville Distribution is proposed to diagnose and quantify rotor asymmetries in induction generators. It relies on the Wigner-Ville analysis of the current produced by these machines while operating under speed varying conditions and on the further tracking of the characteristic evolutions of fault-related components in the resulting time-frequency maps. Preliminary experimental results show the validity of the approach as well as its potential to diagnose this type of failures in wind generators.