In this article, the endurance characteristic of the TiN/HZO/TiN capacitor was improved by the laminated structure of a ferroelectric Hf0.5Zr0.5O2 thin film. Altering the HZO deposition ratio, the laminated-structure interlayer was formed in the middle of the HZO film. Although small remanent polarization reduction was observed in the capacitor with a laminated structure, the endurance characteristic was improved by two orders of magnitude (from 106 to 108 cycles). Moreover, the leakage current of the TiN/HZO/TiN capacitor with the laminated-structure interlayer was reduced by one order of magnitude. The reliability enhancement was proved by the Time-Dependent Dielectric Breakdown (TDDB) test, and the optimization results were attributed to the migration inhibition and nonuniform distribution of oxygen vacancies. Without additional materials and a complicated process, the laminated-structure method provides a feasible strategy for improving HZO device reliability.
4 December 2023 in IEEE Transactions on Nanotechnology
Hafnia ferroelectric-based Fe-FET devices have attracted increasing interest due to their CMOS compatibility, high scalability and low power consumption. Ge-based Fe-FETs could help overcome the shortcomings of Si-based Fe-FETs caused by the interface layer. In this work, the effect of the deposition temperature on the TiN/Hf 0.5 Zr 0.5 O 2 /Ge device performance is systematically studied, which is helpful for finding the optimal conditions for Ge-based Fe-FETs. By adjusting the deposition temperature, the endurance property of the MFS capacitor is successfully enhanced to 2×10 5 cycles with a large minimum remnant polarization (2P r ≈ 46 μC/cm 2 ). The observed phenomenon could be well understood by the effects of the deposition temperature and impurity concentration on the grain size.