While MgH2 has been widely regarded as a promising solid‐state hydrogen storage material, the high operating temperature and sluggish kinetics pose a major bottleneck for its practical application. Herein, V4Nb18O55 microspheres composed of nanoparticles with size of tens of nanometers are fabricated to promote H2 desorption and absorption properties of MgH2, which results in the uniform formation of Nb/V interfaces based on a molecular scale during the reversible hydrogen storage process. It is experimentally and theoretically demonstrated that the uniform building of Nb/V interfaces not only preserves the ability of Nb in weakening Mg‐H bonds but also alleviates the strong adsorption capacity of metallic Nb toward hydrogen atoms, leading to a relative energy barrier for the whole dehydrogenation process of MgH2 of only 0.5 eV, which is 0.22 and 0.43 eV lower than that of Nb and V, respectively. As a result, under the addition of V4Nb18O55 microspheres, the onset H2 desorption temperature of MgH2 is decreased to 165 °C, 125 °C lower than that of bulk MgH2, and the complete hydrogenation of Mg could be realized even at room temperature, while almost no H2 adsorption is observed for bulk Mg at a high temperature of 50 °C.
The stability, mechanical and electronic properties of a BC2N monolayer and its potential use as an anode material for Li-ion batteries were explored using the density functional theory calculation. The proposed BC2N monolayer shows good thermal and dynamical stabilities, as indicated by the ab initio molecular dynamics simulations and phonon dispersion calculations. The BC2N monolayer exhibits highly anisotropic mechanical properties. The electronic structure calculation based on the hybrid functional suggests that the BC2N monolayer is an indirect bandgap (~1.8 eV) semiconductor. The BC2N monolayer shows linear dichroism and is able to harvest visible and ultraviolet light. To investigate the application of the BC2N monolayer as a potential anode material for Li-ion batteries, the Li adsorption and diffusion on the monolayer were studied. The BC2N monolayer exhibits a high theoretical capacity of 1098 mAh/g for Li-ion batteries. The calculated diffusion barrier of Li ion is 0.45 eV, suggesting a rapid Li-ion charge and discharge rate. The unique mechanical and optical properties of the BC2N monolayer also make it an attractive material for use in advanced nanomechanical and optoelectronic devices.
Two-dimensional (2D) carbon allotropes with all-sp2-hybridization have demonstrated great potential in nano-photoelectric devices, but the application of semiconductor photocatalysts for water splitting and anodes in magnesium batteries remains unoptimistic. Motivated by this, we theoretically study a highly stable all-sp2-hybridized 2D carbon allotrope twin T-graphene (TTG) via first-principles simulations. And through the calculations of the HSE06 functional, we find that TTG has a wide bandgap (2.70 eV) and suitable band edge positions satisfying the criteria of photocatalysts for overall water splitting. Additionally, TTG exhibits excellent photocatalytic properties for overall water splitting reflecting a high STH efficiency (12.34%), strong absorption coefficient in the visible-light region and the carrier mobility being high for electrons but low for holes. By investigating the strain effects, we get that, with biaxial compressive strain, the ability of overall photocatalytic water splitting can be effectively improved including STH up to ∼30%. Moreover, the bulk TTG also exhibits great potential as an anode material of magnesium batteries with a theoretical capacity of 556 mA h g−1, average voltage of 0.74 V and diffusion energy barrier of ∼0.96 eV. Our results would broaden the application of all-sp2-hybridized 2D carbon allotropes in the semiconductor photocatalytic and magnesium batteries field.