Maintaining a stable borehole and optimizing drilling are still considered to be vital practice for the success of any hydrocarbon field development and planning. The present study deliberates a case study on the estimation of pore pressure and fracture gradient for the recently decommissioned Volve oil field at the North Sea. High resolution geophysical logs drilled through the reservoir formation of the studied field have been used to estimate the overburden, pore pressure, and fracture pressure. The well-known Eaton’s method and Matthews-Kelly’s tools were used for the estimation of pore pressure and fracture gradient, respectively. Estimated outputs were calibrated and validated with the available direct downhole measurements (formation pressure measurements, LOT/FIT). Further, shear failure gradient has been calculated using Mohr-Coulomb rock failure criterion to understand the wellbore stability issues in the studied field. Largely, the pore pressure in the reservoir formation is hydrostatic in nature, except the lower Cretaceous to upper Jurassic shales, which were found to be associated with mild overpressure regimes. This study is an attempt to assess the in-situ stress system of the Volve field if CO2 is injected for geological storage in near future.
The utilization of anthropogenic CO2 for enhanced oil recovery (EOR) can significantly extend the production life of an oil field, and help in the reduction of atmospheric emission of anthropogenic CO2 if sequestration is considered. This work summarizes the prospect of EOR and sequestration using CO2 flooding from an Indian mature oil field at Cambay basin through numerical modelling, simulation and pressure study based on limited data provided by the operator. To get an insight into CO2-EOR and safe storage process in this oil field, a conceptual sector model is developed and screening standard is proposed keeping in mind the major pay zone of the producing reservoir. To construct the geomodel, depth maps, well positions and coordinates, well data and well logs, perforation depths and distribution of petrophysical properties as well as fluid properties provided by the operator, has been considered. Based on the results from the present study, we identified that the reservoir has the potential for safe and economic geological sequestration of 15.04×106 metric ton CO2 in conjunction with a substantial increase in oil recovery of 10.4% of original oil in place. CO2-EOR and storage in this mature field has a bright application prospect since the findings of the present work could be a better input to manage the reservoir productivity, and the pressure field for significant enhancement of oil recovery followed by safe storage.