A large number of unexploited low-grade vanadium-titanium magnetite deposits have been found in the Chao-yang area of China in recent years. The reserves are estimated at more than 20 billion tons. A mineralogical study of raw sample indicated that it was a typical low-grade vanadium-titanium magnetite ore with weathering. Most of vanadium-titanium magnetite was replaced by martite and sphene, which would affect the recovery of valuable elements. The intergrowth relationship between vanadium-titanium magnetite and sphene was very complex, and the grain size of sphene was generally fine, and could not be completely liberated even by fine grinding, whereas the content of vanadium and titanium in sphene was higher than that in vanadium-titanium magnetite, resulting in vanadium-titanium magnetite concentrates with characteristics of high vanadium and titanium content. A magnetic separation process was investigated for the pre-concentration of low-grade vanadium-titanium magnetite ore. The results showed that 73.52% of feed ore were directly discarded for reducing the processing capacity of follow-up processing. A vanadium-titanium magnetite concentrate with 1.14% V₂O₅, 22.22% TiO₂, 42.51% Fe and a rough concentrate of ilmenite with 16.05% TiO₂, 20.77% Fe were obtained from low-grade vanadium-titanium magnetite ore which contains 0.050% V₂O₅, 1.67% TiO₂ and 8.53% Fe.

Phosphate ore is a valuable strategic resource. Most phosphate ore in China is collophane. Utilization of mid-low grade collophane is necessary to maintain social sustainable development. The gravity-flotation combination separation process can be utilized to separate mid-low grade collophane, but the process consumes a large quantity of acid in the reverse stage. Sodium dodecyl sulfate (SDS) was used as a dolomite collector in this study to reduce the acid consumption of collophane flotation. SDS effectively removed dolomite from the gravity concentrate when no other reagents were present. Flotation test results showed that, compared to the conventional gravity-flotation process, the proposed SDS-based process reduced phosphoric acid dosage from 6.1 kg/t to 3.9 kg/t with similar separation results. The SDS action mechanisms on dolomite were further investigated by zeta potential analysis, single mineral flotation tests, infrared spectrum detection, and theoretical analysis. The results indicate that the SDS adsorption on dolomite is mainly physical adsorption, and that favorable separation effects between collophane and dolomite may be attributed to physical adsorption and entrainment. In addition, it also indicates that the physical adsorption can be utilized to remove dolomite from phosphate on account of zeta potential differences when the separate feed is coarse.