This paper presents a novel method for the dynamic positioning of an unmanned underwater vehicle (UUV) with unknown trajectories based on an autonomous tracking buoy (PUVV-ATB) that indirectly positions the UUV using ultra-short baseline measurements. The method employs a spatial location geometric model and divides the positioning process into four steps, including data preprocessing to detect geometric errors and apply mean filtering, direction capture, position tracking, and position synchronization. To achieve these steps, a new adaptive tracking control algorithm is proposed that does not require trajectory prediction and is applied to the last three steps. The algorithm is deployed to the buoy for tracking simulation and sea trial experiments, and the results are compared with those of a model predictive control algorithm. The autonomous tracking buoy based on the adaptive tracking control algorithm runs more stably and can better complete the precise tracking task for the UUV with a positioning error of less than 10 cm. This method breaks the premise of trajectory prediction based on traditional tracking control algorithms, providing a new direction for further research on UUV localization. Furthermore, the conclusion of this paper has important reference value for other research and application fields related to UUV.
14 June 2022 in Wireless Communications and Mobile Computing
As one of the most important high value-added raw materials in the chemical industry, the synthesis of C4 Olefin by ethanol coupling was of great significance in the field of the chemical industry. Different catalysts and various conditions have different effects on the chemical reaction. This paper is based on the relevant data set. Firstly, Pearson and Spearman correlation coefficient method and corresponding hypothesis test are used to get the influence of different catalysts on the chemical reaction. Ethanol conversion and C4 Olefin selectivity are positively correlated with temperature. Secondly, a multivariate linear regression model with significant core variables is constructed to investigate the effects of catalyst combination and temperature on ethanol conversion and C4 Olefin selectivity. It can be concluded that the ethanol concentration is greatly affected by temperature and CO loading, and there is a positive and negative correlation between ethanol concentration and CO loading. The selectivity of C4 Olefin is affected by temperature and is positively correlated with the charge ratio of CO/SiO2 and HAP. Finally, by using a multiple regression equation and simulated annealing model, it can be obtained that when the loading of CO is 4.75wt, the loading ratio of CO/SiO2 and HAP is 1:1.4242, the concentration of ethanol is 0.3658ml/min, and the temperature is 448.21C, the loading ratio of CO/SiO2 and HAP is 1:1.4242, the concentration of ethanol is 0.3658ml/min, and the temperature is 448.21C, the yield of C4 Olefin can reach a higher value.
A cam design method is proposed in this study that utilizes mathematical modeling and MATLAB simulation analysis. The objective is to construct cam profiles that are suitable for complex trajectories with precision and efficiency. Initially, mathematical modeling is employed to determine the projected running trajectory. Subsequently, the corresponding cam contour is derived through MATLAB simulation analysis. To demonstrate the effectiveness of the proposed method, a carbon-free car navigating a complex path is chosen as an illustrative example for cam design. Experimental results confirm that the car successfully follows the predetermined path using the cam steering mechanism, with the walking trajectory closely aligning with the preset trajectory. This outcome substantiates the reliability of the cam design method.
In response to the challenges posed by the difficult cleaning of tunnel retro-reflective rings and the unsuitability of existing climbing robots for ascending tunnel retro-reflective rings, a tunnel retro-reflective ring cleaning robot is proposed. Firstly, based on the analysis of the operational and environmental characteristics and functional requirements inside the tunnel, the design and planning of the robot’s main framework, motion system, cleaning mechanism, and intelligent detection system are conducted to evaluate its walking ability under various working conditions, such as aluminum plate overlaps and rivet protrusions. Subsequently, stability analysis is performed on the robot. The static analysis explored conditions that can make the climbing robot stable, the dynamic analysis obtained the minimum driving torque and finally, verified the stability of the robot through experiments. After that, by changing the material and thickness of the main framework for deformation simulation analysis, the optimal parameters to optimize the design of the main framework are found. Finally, the three factors affecting the cleaning effect of the robot are discussed by the response surface method, and single factor analysis and response surface regression analysis are carried out, respectively. The mathematical regression model of the three factors is established and the best combination of the three factors is found. The cleaning effect is best when the cleaning disc pressure is 5.101 N, the walking wheel motor speed is 36.93 rad/min, and the cleaning disc motor speed is 38.252 rad/min. The development of this machine can provide equipment support for the cleaning of tunnel retro-reflective rings, reducing the requirement of manpower and material resources.
Inverted swimming behavior has been documented in marine arthropods from the Cambrian to modern oceans. It was previously theorized that this behavior contributed to bringing the center of gravity to a lower position, thereby enhancing balance and stability, and preventing clogging of the mouth in deposit and suspension feeders. In this study, by using the computational fluid dynamics analysis method and wave impact experiments, we evaluate the hydrodynamics of inverted swimming behavior in the early Cambrian Ercaicunia multinodosa when it was at the water surface. The results show that when Ercaicunia multinodosa swam at the water surface, the inverted swimming was more stable than the normal posture regardless of the direction from which the waves came. Moreover, as the wave amplitude increased (within the tested and validated range of 0.33 to 1.0 times the body height), the rate at which the flipping occurred in the normal posture was accelerated and then remained stable in the inverted posture. Finally, we used a stereolithography apparatus to create a physical model of Ercaicunia multinodosa and performed wave impact experiments to verify the research results. Our findings support the hypothesis that the inverted swimming behavior of Ercaicunia multinodosa helps increase balance and stability.