Wall-climbing robots have been well-developed for storage tank inspection. This work presents a backstepping sliding-mode control (BSMC) strategy for the spatial trajectory tracking control of a wall-climbing robot, which is specially designed to inspect inside and outside of cylindrical storage tanks. The inspection robot is designed with four magnetic wheels, which are driven by two DC motors. In order to achieve an accurate spatial position of the robot, a multisensor-data-fusion positioning method is developed. The new control method is proposed with kinematics based on a cylindrical coordinate system as the robot is moving on a cylindrical surface. The main purpose is to promote a smooth and stable tracking performance during inspection tasks, under the consideration of the robot’s kinematic constraints and the magnetic restrictions of the adhesion system. The simulation results indicate that the proposed sliding mode controller can quickly correct the errors and global asymptotic stability is achieved. The prototype experimental results further validate the advancement of the proposed method; the wall-climbing robot can track both longitudinal and horizontal spatial trajectories stably with high precision.
This paper deals with the consensus output tracking problem for multi-agent systems with unknown high-frequency gain signs, in which the subsystems are connected over directed graphs. The subsystems may have different dynamics, as long as the relative degrees are the same. A new type of Nussbaum gain is first presented to tackle adaptive consensus control of network-connected systems without the knowledge of the high-frequency gains. Adaptive laws and internal models are then proposed to handle the uncertainties and unknown parameters. An integral Lyapunov function based on sufficient conditions is finally introduced to tackle the asymmetry of the Laplacian matrix of directed graphs, into which we incorporate the new Nussbaum gain and the adaptive internal model to design the controller. It is apparent that the control scheme and the adaptive laws are fully distributed, which means that only the relative information of the neighbourhood subsystems’ outputs is used, and the simulation results validate the effectiveness of the control design, whereby they guarantee the asymptotic convergence of errors to zero as well as the boundedness of the state variables.